ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
+ ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
ATA_EH_LPM = (1 << 4), /* link power management action */
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
+ ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET |
+ ATA_EH_ENABLE_LINK | ATA_EH_LPM,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
unsigned int flags; /* ATA_LFLAG_xxx */
+ u32 saved_scontrol; /* SControl on probe */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
/*
* Optional features
*/
- int (*scr_read)(struct ata_port *ap, unsigned int sc_reg, u32 *val);
- int (*scr_write)(struct ata_port *ap, unsigned int sc_reg, u32 val);
+ int (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val);
+ int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
void (*pmp_attach)(struct ata_port *ap);
void (*pmp_detach)(struct ata_port *ap);
int (*enable_pm)(struct ata_port *ap, enum link_pm policy);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
-extern int ata_link_online(struct ata_link *link);
-extern int ata_link_offline(struct ata_link *link);
+extern bool ata_link_online(struct ata_link *link);
+extern bool ata_link_offline(struct ata_link *link);
#ifdef CONFIG_PM
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
return ata_tag_valid(link->active_tag) || link->sactive;
}
-static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
-{
- if (sata_pmp_attached(ap))
- return ap->pmp_link;
- return &ap->link;
-}
-
-static inline struct ata_link *ata_port_next_link(struct ata_link *link)
-{
- struct ata_port *ap = link->ap;
+extern struct ata_link *__ata_port_next_link(struct ata_port *ap,
+ struct ata_link *link,
+ bool dev_only);
- if (ata_is_host_link(link)) {
- if (!sata_pmp_attached(ap))
- return NULL;
- return ap->pmp_link;
- }
-
- if (++link < ap->nr_pmp_links + ap->pmp_link)
- return link;
- return NULL;
-}
-
-#define __ata_port_for_each_link(lk, ap) \
- for ((lk) = &(ap)->link; (lk); (lk) = ata_port_next_link(lk))
+#define __ata_port_for_each_link(link, ap) \
+ for ((link) = __ata_port_next_link((ap), NULL, false); (link); \
+ (link) = __ata_port_next_link((ap), (link), false))
#define ata_port_for_each_link(link, ap) \
- for ((link) = ata_port_first_link(ap); (link); \
- (link) = ata_port_next_link(link))
+ for ((link) = __ata_port_next_link((ap), NULL, true); (link); \
+ (link) = __ata_port_next_link((ap), (link), true))
#define ata_link_for_each_dev(dev, link) \
for ((dev) = (link)->device; \
return from_jiffies + msecs_to_jiffies(timeout_msecs);
}
+/* Don't open code these in drivers as there are traps. Firstly the range may
+ change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+ > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+ return 1;
+ return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+ return 1;
+ return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+ return (adev->dma_mode == 0xFF ? 0 : 1);
+}
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c