ide_started, /* a drive operation was started, handler was set */
} ide_startstop_t;
+/* ATAPI packet command flags */
+enum {
+ /* set when an error is considered normal - no retry (ide-tape) */
+ PC_FLAG_ABORT = (1 << 0),
+ PC_FLAG_SUPPRESS_ERROR = (1 << 1),
+ PC_FLAG_WAIT_FOR_DSC = (1 << 2),
+ PC_FLAG_DMA_OK = (1 << 3),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
+ /* command timed out */
+ PC_FLAG_TIMEDOUT = (1 << 7),
+};
+
+/*
+ * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
+ * This is used for several packet commands (not for READ/WRITE commands).
+ */
+#define IDE_PC_BUFFER_SIZE 256
+
+struct ide_atapi_pc {
+ /* actual packet bytes */
+ u8 c[12];
+ /* incremented on each retry */
+ int retries;
+ int error;
+
+ /* bytes to transfer */
+ int req_xfer;
+ /* bytes actually transferred */
+ int xferred;
+
+ /* data buffer */
+ u8 *buf;
+ /* current buffer position */
+ u8 *cur_pos;
+ int buf_size;
+ /* missing/available data on the current buffer */
+ int b_count;
+
+ /* the corresponding request */
+ struct request *rq;
+
+ unsigned long flags;
+
+ /*
+ * those are more or less driver-specific and some of them are subject
+ * to change/removal later.
+ */
+ u8 pc_buf[IDE_PC_BUFFER_SIZE];
+
+ /* idetape only */
+ struct idetape_bh *bh;
+ char *b_data;
+
+ /* idescsi only for now */
+ struct scatterlist *sg;
+ unsigned int sg_cnt;
+
+ struct scsi_cmnd *scsi_cmd;
+ void (*done) (struct scsi_cmnd *);
+
+ unsigned long timeout;
+};
+
struct ide_devset;
struct ide_driver_s;
struct device gendev;
struct completion gendev_rel_comp; /* to deal with device release() */
+ /* current packet command */
+ struct ide_atapi_pc *pc;
+
/* callback for packet commands */
- void (*pc_callback)(struct ide_drive_s *);
+ void (*pc_callback)(struct ide_drive_s *, int);
+
+ void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
+ int (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
+ unsigned int, int);
unsigned long atapi_flags;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
};
typedef struct ide_drive_s ide_drive_t;
ide_decl_devset(unmaskirq);
ide_decl_devset(using_dma);
-/* ATAPI packet command flags */
-enum {
- /* set when an error is considered normal - no retry (ide-tape) */
- PC_FLAG_ABORT = (1 << 0),
- PC_FLAG_SUPPRESS_ERROR = (1 << 1),
- PC_FLAG_WAIT_FOR_DSC = (1 << 2),
- PC_FLAG_DMA_OK = (1 << 3),
- PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
- PC_FLAG_DMA_ERROR = (1 << 5),
- PC_FLAG_WRITING = (1 << 6),
- /* command timed out */
- PC_FLAG_TIMEDOUT = (1 << 7),
-};
-
-/*
- * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
- * This is used for several packet commands (not for READ/WRITE commands).
- */
-#define IDE_PC_BUFFER_SIZE 256
-
-struct ide_atapi_pc {
- /* actual packet bytes */
- u8 c[12];
- /* incremented on each retry */
- int retries;
- int error;
-
- /* bytes to transfer */
- int req_xfer;
- /* bytes actually transferred */
- int xferred;
-
- /* data buffer */
- u8 *buf;
- /* current buffer position */
- u8 *cur_pos;
- int buf_size;
- /* missing/available data on the current buffer */
- int b_count;
-
- /* the corresponding request */
- struct request *rq;
-
- unsigned long flags;
-
- /*
- * those are more or less driver-specific and some of them are subject
- * to change/removal later.
- */
- u8 pc_buf[IDE_PC_BUFFER_SIZE];
-
- /* idetape only */
- struct idetape_bh *bh;
- char *b_data;
-
- /* idescsi only for now */
- struct scatterlist *sg;
- unsigned int sg_cnt;
-
- struct scsi_cmnd *scsi_cmd;
- void (*done) (struct scsi_cmnd *);
-
- unsigned long timeout;
-};
-
#ifdef CONFIG_IDE_PROC_FS
/*
* /proc/ide interface
REQ_IDETAPE_WRITE = (1 << 3),
};
-void ide_queue_pc_head(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
- struct request *);
int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
+void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
+void ide_retry_pc(ide_drive_t *, struct gendisk *);
+
+static inline unsigned long ide_scsi_get_timeout(struct ide_atapi_pc *pc)
+{
+ return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
+}
+
+int ide_scsi_expiry(ide_drive_t *);
-ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
- void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
- void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int,
- int));
-ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
- ide_handler_t *, unsigned int, ide_expiry_t *);
-ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *,
+ide_startstop_t ide_transfer_pc(ide_drive_t *, unsigned int, ide_expiry_t *);
+ide_startstop_t ide_issue_pc(ide_drive_t *,
ide_handler_t *, unsigned int, ide_expiry_t *);
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);