#define __ASM_DB1200_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
// This is defined in au1000.h with bogus value
#undef AU1X00_EXTERNAL_INT
#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
-#define AU1XXX_ATA_PHYS_LEN (0x100)
-#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT DB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
#define NAND_PHYS_ADDR 0x20000000
/*
- * External Interrupts for Pb1200 as of 8/6/2004.
- * Bit positions in the CPLD registers can be calculated by taking
- * the interrupt define and subtracting the DB1200_INT_BEGIN value.
- * *example: IDE bis pos is = 64 - 64
- ETH bit pos is = 65 - 64
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ *
+ * Example: IDE bis pos is = 64 - 64
+ * ETH bit pos is = 65 - 64
*/
-#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
-#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
-#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
-#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
-#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
-#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
-#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
-#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
-#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
-#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
-#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
-#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
-#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
-#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
-#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
-
-#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
+enum external_pb1200_ints {
+ DB1200_INT_BEGIN = AU1000_MAX_INTR + 1,
+
+ DB1200_IDE_INT = DB1200_INT_BEGIN,
+ DB1200_ETH_INT,
+ DB1200_PC0_INT,
+ DB1200_PC0_STSCHG_INT,
+ DB1200_PC1_INT,
+ DB1200_PC1_STSCHG_INT,
+ DB1200_DC_INT,
+ DB1200_FLASHBUSY_INT,
+ DB1200_PC0_INSERT_INT,
+ DB1200_PC0_EJECT_INT,
+ DB1200_PC1_INSERT_INT,
+ DB1200_PC1_EJECT_INT,
+ DB1200_SD0_INSERT_INT,
+ DB1200_SD0_EJECT_INT,
+
+ DB1200_INT_END = DB1200_INT_BEGIN + 15,
+};
+
/* For drivers/pcmcia/au1000_db1x00.c */