fbdev: add new framebuffer driver for Fujitsu MB862xx GDCs

[linux-2.6-omap-h63xx.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3b296e410f91c3057ba475f9c83d1ec82f8f3a9c..3f3ce13fef431450909e12cb91646534c68cf46f 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -76,6 +76,14 @@ config FB_DDC
        select I2C
        default n
 
+config FB_BOOT_VESA_SUPPORT
+       bool
+       depends on FB
+       default n
+       ---help---
+         If true, at least one selected framebuffer driver can take advantage
+         of VESA video modes set at an early boot stage via the vga= parameter.
+
 config FB_CFB_FILLRECT
        tristate
        depends on FB
@@ -681,6 +689,7 @@ config FB_VESA
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
+       select FB_BOOT_VESA_SUPPORT
        help
          This is the frame buffer device driver for generic VESA 2.0
          compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -1117,6 +1126,7 @@ config FB_INTEL
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
+       select FB_BOOT_VESA_SUPPORT
        help
          This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
@@ -1469,6 +1479,7 @@ config FB_SIS
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
+       select FB_BOOT_VESA_SUPPORT
        help
          This is the frame buffer device driver for the SiS 300, 315, 330
          and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1885,6 +1896,28 @@ config FB_SH_MOBILE_LCDC
        ---help---
          Frame buffer driver for the on-chip SH-Mobile LCD controller.
 
+config FB_TMIO
+       tristate "Toshiba Mobile IO FrameBuffer support"
+       depends on FB && MFD_CORE
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         Frame buffer driver for the Toshiba Mobile IO integrated as found
+         on the Sharp SL-6000 series
+
+         This driver is also available as a module ( = code which can be
+         inserted and removed from the running kernel whenever you want). The
+         module will be called tmiofb. If you want to compile it as a module,
+         say M here and read <file:Documentation/kbuild/modules.txt>.
+
+         If unsure, say N.
+
+config FB_TMIO_ACCELL
+       bool "tmiofb acceleration"
+       depends on FB_TMIO
+       default y
+
 config FB_S3C2410
        tristate "S3C2410 LCD framebuffer support"
        depends on FB && ARCH_S3C2410
@@ -2050,6 +2083,38 @@ config FB_METRONOME
          controller. The pre-release name for this device was 8track
          and could also have been called by some vendors as PVI-nnnn.
 
+config FB_MB862XX
+       tristate "Fujitsu MB862xx GDC support"
+       depends on FB
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       ---help---
+         Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+config FB_MB862XX_PCI_GDC
+       bool "Carmine/Coral-P(A) GDC"
+       depends on PCI && FB_MB862XX
+       ---help---
+         This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+         PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+       bool "Lime GDC"
+       depends on FB_MB862XX
+       depends on OF && !FB_MB862XX_PCI_GDC
+       select FB_FOREIGN_ENDIAN
+       select FB_LITTLE_ENDIAN
+       ---help---
+         Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+config FB_PRE_INIT_FB
+       bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+       depends on FB_MB862XX_LIME
+       ---help---
+         Select this option if display contents should be inherited as set by
+         the bootloader.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"