whiteheat: use request_firmware()

[linux-2.6-omap-h63xx.git] / drivers / usb / serial / whiteheat.c

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index f07e8a4c1f3ddb3b3cfe12f4a3b22bef7e7c11a9..665aa77a917b1c464c5f6da22860a54a6afd1fd6 100644 (file)
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -81,7 +81,8 @@
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
 #include <linux/usb/serial.h>
-#include "whiteheat_fw.h"              /* firmware for the ConnectTech WhiteHEAT device */
+#include <linux/firmware.h>
+#include <linux/ihex.h>
 #include "whiteheat.h"                 /* WhiteHEAT specific commands */
 
 static int debug;
@@ -279,37 +280,52 @@ static int firm_report_tx_done(struct usb_serial_port *port);
 */
 static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
 {
-       int response;
-       const struct whiteheat_hex_record *record;
-       
+       int response, ret = -ENOENT;
+       const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
+       const struct ihex_binrec *record;
+
        dbg("%s", __func__);
-       
+
+       if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
+                                 &serial->dev->dev)) {
+               err("%s - request \"whiteheat.fw\" failed", __func__);
+               goto out;
+       }
+       if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
+                            &serial->dev->dev)) {
+               err("%s - request \"whiteheat_loader.fw\" failed", __func__);
+               goto out;
+       }
+       ret = 0;
        response = ezusb_set_reset (serial, 1);
 
-       record = &whiteheat_loader[0];
-       while (record->address != 0xffff) {
-               response = ezusb_writememory (serial, record->address, 
-                               (unsigned char *)record->data, record->data_size, 0xa0);
+       record = (const struct ihex_binrec *)loader_fw->data;
+       while (record) {
+               response = ezusb_writememory (serial, be32_to_cpu(record->addr),
+                                             (unsigned char *)record->data,
+                                             be16_to_cpu(record->len), 0xa0);
                if (response < 0) {
                        err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
-                               __func__, response, record->address, record->data, record->data_size);
+                           __func__, response, be32_to_cpu(record->addr),
+                           record->data, be16_to_cpu(record->len));
                        break;
                }
-               ++record;
+               record = ihex_next_binrec(record);
        }
 
        response = ezusb_set_reset (serial, 0);
 
-       record = &whiteheat_firmware[0];
-       while (record->address < 0x1b40) {
-               ++record;
-       }
-       while (record->address != 0xffff) {
-               response = ezusb_writememory (serial, record->address, 
-                               (unsigned char *)record->data, record->data_size, 0xa3);
+       record = (const struct ihex_binrec *)firmware_fw->data;
+       while (record && be32_to_cpu(record->addr) < 0x1b40)
+               record = ihex_next_binrec(record);
+       while (record) {
+               response = ezusb_writememory (serial, be32_to_cpu(record->addr),
+                                             (unsigned char *)record->data,
+                                             be16_to_cpu(record->len), 0xa3);
                if (response < 0) {
                        err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", 
-                               __func__, response, record->address, record->data, record->data_size);
+                           __func__, response, be32_to_cpu(record->addr),
+                           record->data, be16_to_cpu(record->len));
                        break;
                }
                ++record;
@@ -317,21 +333,25 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct
        
        response = ezusb_set_reset (serial, 1);
 
-       record = &whiteheat_firmware[0];
-       while (record->address < 0x1b40) {
-               response = ezusb_writememory (serial, record->address, 
-                               (unsigned char *)record->data, record->data_size, 0xa0);
+       record = (const struct ihex_binrec *)firmware_fw->data;
+       while (record && be32_to_cpu(record->addr) < 0x1b40) {
+               response = ezusb_writememory (serial, be32_to_cpu(record->addr),
+                                             (unsigned char *)record->data,
+                                             be16_to_cpu(record->len), 0xa0);
                if (response < 0) {
                        err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", 
-                               __func__, response, record->address, record->data, record->data_size);
+                           __func__, response, be32_to_cpu(record->addr),
+                           record->data, be16_to_cpu(record->len));
                        break;
                }
                ++record;
        }
-
+       ret = 0;
        response = ezusb_set_reset (serial, 0);
-
-       return 0;
+ out:
+       release_firmware(loader_fw);
+       release_firmware(firmware_fw);
+       return ret;
 }
 
 
@@ -1503,6 +1523,9 @@ MODULE_AUTHOR( DRIVER_AUTHOR );
 MODULE_DESCRIPTION( DRIVER_DESC );
 MODULE_LICENSE("GPL");
 
+MODULE_FIRMWARE("whiteheat.fw");
+MODULE_FIRMWARE("whiteheat_loader.fw");
+
 module_param(urb_pool_size, int, 0);
 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");