unsigned int i, j;
int good_spot;
- dbg("%s %d", __FUNCTION__, num_ports);
+ dbg("%s %d", __func__, num_ports);
*minor = 0;
mutex_lock(&table_lock);
*minor = i;
j = 0;
- dbg("%s - minor base = %d", __FUNCTION__, *minor);
+ dbg("%s - minor base = %d", __func__, *minor);
for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
serial_table[i] = serial;
serial->port[j++]->number = i;
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial == NULL)
return;
serial = to_usb_serial(kref);
- dbg("%s - %s", __FUNCTION__, serial->type->description);
+ dbg("%s - %s", __func__, serial->type->description);
serial->type->shutdown(serial);
unsigned int portNumber;
int retval;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* get the serial object associated with this tty pointer */
serial = usb_serial_get_by_index(tty->index);
if (!port)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
- if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
+ if (port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
- dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->open_count) {
- retval = -EINVAL;
- dbg("%s - port not opened", __FUNCTION__);
- goto exit;
- }
+ /* open_count is managed under the mutex lock for the tty so cannot
+ drop to zero until after the last close completes */
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(port, buf, count);
static int serial_write_room (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
-
- if (!port)
- goto exit;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- goto exit;
- }
-
+ dbg("%s - port %d", __func__, port->number);
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
- retval = port->serial->type->write_room(port);
-
-exit:
- return retval;
+ return port->serial->type->write_room(port);
}
static int serial_chars_in_buffer (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
-
- if (!port)
- goto exit;
-
- dbg("%s = port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- goto exit;
- }
+ dbg("%s = port %d", __func__, port->number);
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
- retval = port->serial->type->chars_in_buffer(port);
-
-exit:
- return retval;
+ return port->serial->type->chars_in_buffer(port);
}
static void serial_throttle (struct tty_struct * tty)
{
struct usb_serial_port *port = tty->driver_data;
+ dbg("%s - port %d", __func__, port->number);
- if (!port)
- return;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg ("%s - port not open", __FUNCTION__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
if (port->serial->type->throttle)
port->serial->type->throttle(port);
static void serial_unthrottle (struct tty_struct * tty)
{
struct usb_serial_port *port = tty->driver_data;
+ dbg("%s - port %d", __func__, port->number);
- if (!port)
- return;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function */
if (port->serial->type->unthrottle)
port->serial->type->unthrottle(port);
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
- if (!port)
- goto exit;
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
-
- if (!port->open_count) {
- dbg ("%s - port not open", __FUNCTION__);
- goto exit;
- }
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
- if (port->serial->type->ioctl)
+ if (port->serial->type->ioctl) {
+ lock_kernel();
retval = port->serial->type->ioctl(port, file, cmd, arg);
+ unlock_kernel();
+ }
else
retval = -ENOIOCTLCMD;
-
-exit:
return retval;
}
static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
{
struct usb_serial_port *port = tty->driver_data;
+ dbg("%s - port %d", __func__, port->number);
- if (!port)
- return;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- return;
- }
-
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
if (port->serial->type->set_termios)
port->serial->type->set_termios(port, old);
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- return;
- }
+ dbg("%s - port %d", __func__, port->number);
+ WARN_ON(!port->open_count);
/* pass on to the driver specific version of this function if it is available */
- if (port->serial->type->break_ctl)
+ if (port->serial->type->break_ctl) {
+ lock_kernel();
port->serial->type->break_ctl(port, break_state);
+ unlock_kernel();
+ }
}
static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
off_t begin = 0;
char tmp[40];
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
serial = usb_serial_get_by_index(i);
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return -ENODEV;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- return -ENODEV;
- }
+ dbg("%s - port %d", __func__, port->number);
+ WARN_ON(!port->open_count);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(port, file);
-
return -EINVAL;
}
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return -ENODEV;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
- return -ENODEV;
- }
+ dbg("%s - port %d", __func__, port->number);
+ WARN_ON(!port->open_count);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(port, file, set, clear);
-
return -EINVAL;
}
container_of(work, struct usb_serial_port, work);
struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port)
return;
{
struct usb_serial_port *port = to_usb_serial_port(dev);
- dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+ dbg ("%s - %s", __func__, dev_name(dev));
port_free(port);
}
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
return NULL;
}
serial->dev = usb_get_dev(dev);
serial = create_serial (dev, interface, type);
if (!serial) {
unlock_kernel();
- dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&interface->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
- /* check that the device meets the driver's requirements */
- if ((type->num_interrupt_in != NUM_DONT_CARE &&
- type->num_interrupt_in != num_interrupt_in)
- || (type->num_interrupt_out != NUM_DONT_CARE &&
- type->num_interrupt_out != num_interrupt_out)
- || (type->num_bulk_in != NUM_DONT_CARE &&
- type->num_bulk_in != num_bulk_in)
- || (type->num_bulk_out != NUM_DONT_CARE &&
- type->num_bulk_out != num_bulk_out)) {
- dbg("wrong number of endpoints");
- kfree(serial);
- return -EIO;
- }
-
/* found all that we need */
dev_info(&interface->dev, "%s converter detected\n",
type->description);
serial->num_port_pointers = max_endpoints;
unlock_kernel();
- dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints);
+ dbg("%s - setting up %d port structures for this device", __func__, max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
port->dev.bus = &usb_serial_bus_type;
port->dev.release = &port_release;
- snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number);
- dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id);
+ dev_set_name(&port->dev, "ttyUSB%d", port->number);
+ dbg ("%s - registering %s", __func__, dev_name(&port->dev));
retval = device_register(&port->dev);
if (retval)
dev_err(&port->dev, "Error registering port device, "
struct usb_serial_port *port;
usb_serial_console_disconnect(serial);
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
mutex_lock(&serial->disc_mutex);
usb_set_intfdata (interface, NULL);
result = bus_register(&usb_serial_bus_type);
if (result) {
- err("%s - registering bus driver failed", __FUNCTION__);
+ err("%s - registering bus driver failed", __func__);
goto exit_bus;
}
usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
usb_serial_tty_driver->init_termios = tty_std_termios;
usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ usb_serial_tty_driver->init_termios.c_ispeed = 9600;
+ usb_serial_tty_driver->init_termios.c_ospeed = 9600;
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
- err("%s - tty_register_driver failed", __FUNCTION__);
+ err("%s - tty_register_driver failed", __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
- err("%s - usb_register failed", __FUNCTION__);
+ err("%s - usb_register failed", __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
result = usb_serial_generic_register(debug);
if (result < 0) {
- err("%s - registering generic driver failed", __FUNCTION__);
+ err("%s - registering generic driver failed", __func__);
goto exit_generic;
}
bus_unregister(&usb_serial_bus_type);
exit_bus:
- err ("%s - returning with error %d", __FUNCTION__, result);
+ err ("%s - returning with error %d", __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
projects / linux-2.6-omap-h63xx.git / blobdiff