USB: ftdi_sio driver support of bar code scanner from Diebold

[linux-2.6-omap-h63xx.git] / drivers / usb / serial / ftdi_sio.h

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992abad2b546095e35d247a3d7e68aec1eec..1b62eff475d275f8d743cefb193ae9f614da6f6a 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID       0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II          0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -848,6 +854,10 @@
 #define FTDI_DOMINTELL_DGQG_PID        0xEF50  /* Master */
 #define FTDI_DOMINTELL_DUSB_PID        0xEF51  /* DUSB01 module */
 
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID      0x1BC9
+#define ALTI2_N3_PID   0x6001  /* Neptune 3 */
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */
@@ -874,6 +884,11 @@
 #define RATOC_VENDOR_ID                0x0584
 #define RATOC_PRODUCT_ID_USB60F        0xb020
 
+/*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID  0xfb99
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ