USB: drivers/usb/musb/: disable it on SuperH

[linux-2.6-omap-h63xx.git] / drivers / usb / musb / Kconfig

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index faca4333f27a8125a46fcbb7d32362ac56fc3524..58b2b8fc9439c7b93b956e930e74387f17057cf3 100644 (file)
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
        depends on (USB || USB_GADGET) && HAVE_CLK
+       depends on !SUPERH
        select TWL4030_USB if MACH_OMAP_3430SDP
        tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
        help
@@ -165,12 +166,11 @@ config USB_TUSB_OMAP_DMA
        help
          Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
 
-config USB_MUSB_LOGLEVEL
+config USB_MUSB_DEBUG
        depends on USB_MUSB_HDRC
-       int  'Logging Level (0 - none / 3 - annoying / ... )'
-       default 0
+       bool "Enable debugging messages"
+       default n
        help
-         Set the logging level. 0 disables the debugging altogether,
-         although when USB_DEBUG is set the value is at least 1.
-         Starting at level 3, per-transfer (urb, usb_request, packet,
-         or dma transfer) tracing may kick in.
+         This enables musb debugging. To set the logging level use the debug
+         module parameter. Starting at level 3, per-transfer (urb, usb_request,
+         packet, or dma transfer) tracing may kick in.