* Special thanks to Intel and VIA for providing host controllers to
* test this driver on, and Cypress (including In-System Design) for
* providing early devices for those host controllers to talk to!
- *
- * HISTORY:
- *
- * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db)
- * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net)
- * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka,
- * <sojkam@centrum.cz>, updates by DB).
- *
- * 2002-11-29 Correct handling for hw async_next register.
- * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared;
- * only scheduling is different, no arbitrary limitations.
- * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support,
- * clean up HC run state handshaking.
- * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts
- * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other
- * missing pieces: enabling 64bit dma, handoff from BIOS/SMM.
- * 2002-05-07 Some error path cleanups to report better errors; wmb();
- * use non-CVS version id; better iso bandwidth claim.
- * 2002-04-19 Control/bulk/interrupt submit no longer uses giveback() on
- * errors in submit path. Bugfixes to interrupt scheduling/processing.
- * 2002-03-05 Initial high-speed ISO support; reduce ITD memory; shift
- * more checking to generic hcd framework (db). Make it work with
- * Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt).
- * 2002-01-14 Minor cleanup; version synch.
- * 2002-01-08 Fix roothub handoff of FS/LS to companion controllers.
- * 2002-01-04 Control/Bulk queuing behaves.
- *
- * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
- * 2001-June Works with usb-storage and NEC EHCI on 2.4
*/
#define DRIVER_VERSION "10 Dec 2004"
static const char hcd_name [] = "ehci_hcd";
-#undef EHCI_VERBOSE_DEBUG
+#undef VERBOSE_DEBUG
#undef EHCI_URB_TRACE
#ifdef DEBUG
#define EHCI_IAA_MSECS 10 /* arbitrary */
#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
-#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
+#define EHCI_SHRINK_FRAMES 5 /* async qh unlink delay */
/* Initial IRQ latency: faster than hw default */
static int log2_irq_thresh = 0; // 0 to 6
STS_HALT, STS_HALT, 16 * 125);
}
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ int error;
+
+ error = handshake(ehci, ptr, mask, done, usec);
+ if (error) {
+ ehci_halt(ehci);
+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+ ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+ ptr, mask, done, error);
+ }
+
+ return error;
+}
+
/* put TDI/ARC silicon into EHCI mode */
static void tdi_reset (struct ehci_hcd *ehci)
{
/* wait for any schedule enables/disables to take effect */
temp = ehci_readl(ehci, &ehci->regs->command) << 10;
temp &= STS_ASS | STS_PSS;
- if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
- temp, 16 * 125) != 0) {
- ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+ if (handshake_on_error_set_halt(ehci, &ehci->regs->status,
+ STS_ASS | STS_PSS, temp, 16 * 125))
return;
- }
/* then disable anything that's still active */
temp = ehci_readl(ehci, &ehci->regs->command);
ehci_writel(ehci, temp, &ehci->regs->command);
/* hardware can take 16 microframes to turn off ... */
- if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
- 0, 16 * 125) != 0) {
- ehci_to_hcd(ehci)->state = HC_STATE_HALT;
- return;
- }
+ handshake_on_error_set_halt(ehci, &ehci->regs->status,
+ STS_ASS | STS_PSS, 0, 16 * 125);
}
/*-------------------------------------------------------------------------*/
&ehci->regs->port_status[port]);
}
-/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
- * This forcibly disables dma and IRQs, helping kexec and other cases
- * where the next system software may expect clean state.
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Should be called with ehci->lock held.
*/
-static void
-ehci_shutdown (struct usb_hcd *hcd)
+static void ehci_silence_controller(struct ehci_hcd *ehci)
{
- struct ehci_hcd *ehci;
-
- ehci = hcd_to_ehci (hcd);
- (void) ehci_halt (ehci);
+ ehci_halt(ehci);
ehci_turn_off_all_ports(ehci);
/* make BIOS/etc use companion controller during reboot */
ehci_readl(ehci, &ehci->regs->configured_flag);
}
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void ehci_shutdown(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ del_timer_sync(&ehci->watchdog);
+ del_timer_sync(&ehci->iaa_watchdog);
+
+ spin_lock_irq(&ehci->lock);
+ ehci_silence_controller(ehci);
+ spin_unlock_irq(&ehci->lock);
+}
+
static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
{
unsigned port;
timer_action (ehci, TIMER_IO_WATCHDOG);
}
+/*
+ * Called when the ehci_hcd module is removed.
+ */
static void ehci_stop (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
ehci_dbg (ehci, "stop\n");
- /* Turn off port power on all root hub ports. */
- ehci_port_power (ehci, 0);
-
/* no more interrupts ... */
del_timer_sync (&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
if (HC_IS_RUNNING (hcd->state))
ehci_quiesce (ehci);
+ ehci_silence_controller(ehci);
ehci_reset (ehci);
- ehci_writel(ehci, 0, &ehci->regs->intr_enable);
spin_unlock_irq(&ehci->lock);
- /* let companion controllers work when we aren't */
- ehci_writel(ehci, 0, &ehci->regs->configured_flag);
-
remove_companion_file(ehci);
remove_debug_files (ehci);
cmd = ehci_readl(ehci, &ehci->regs->command);
bh = 0;
-#ifdef EHCI_VERBOSE_DEBUG
+#ifdef VERBOSE_DEBUG
/* unrequested/ignored: Frame List Rollover */
dbg_status (ehci, "irq", status);
#endif
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
+
+ /* kick root hub later */
pcd_status = status;
/* resume root hub? */
/* PCI errors [4.15.2.4] */
if (unlikely ((status & STS_FATAL) != 0)) {
- /* bogus "fatal" IRQs appear on some chips... why? */
- status = ehci_readl(ehci, &ehci->regs->status);
dbg_cmd (ehci, "fatal", ehci_readl(ehci,
&ehci->regs->command));
dbg_status (ehci, "fatal", status);
if (bh)
ehci_work (ehci);
spin_unlock (&ehci->lock);
- if (pcd_status & STS_PCD)
+ if (pcd_status)
usb_hcd_poll_rh_status(hcd);
return IRQ_HANDLED;
}
INIT_LIST_HEAD (&qtd_list);
switch (usb_pipetype (urb->pipe)) {
- // case PIPE_CONTROL:
- // case PIPE_BULK:
+ case PIPE_CONTROL:
+ /* qh_completions() code doesn't handle all the fault cases
+ * in multi-TD control transfers. Even 1KB is rare anyway.
+ */
+ if (urb->transfer_buffer_length > (16 * 1024))
+ return -EMSGSIZE;
+ /* FALLTHROUGH */
+ /* case PIPE_BULK: */
default:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
+#ifdef CONFIG_ARCH_OMAP34XX
+#include "ehci-omap.c"
+#define PLATFORM_DRIVER ehci_hcd_omap_driver
+#endif
+
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver