USB: remove optional bus bindings in isp1760, fixing runtime warning

[linux-2.6-omap-h63xx.git] / drivers / usb / host / Kconfig

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 228797e54f9cc009f4ed293da9ccc7f6626ea97a..f3a75a929e0aa26dcdbaee0c75c0cfa10403f8bf 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -110,35 +110,23 @@ config USB_ISP116X_HCD
 
 config USB_ISP1760_HCD
        tristate "ISP 1760 HCD support"
-       depends on USB && EXPERIMENTAL
+       depends on USB && EXPERIMENTAL && (PCI || PPC_OF)
        ---help---
          The ISP1760 chip is a USB 2.0 host controller.
 
          This driver does not support isochronous transfers or OTG.
+         This USB controller is usually attached to a non-DMA-Master
+         capable bus. NXP's eval kit brings this chip on PCI card
+         where the chip itself is behind a PLB to simulate such
+         a bus.
 
          To compile this driver as a module, choose M here: the
-         module will be called isp1760-hcd.
-
-config USB_ISP1760_PCI
-       bool "Support for the PCI bus"
-       depends on USB_ISP1760_HCD && PCI
-       ---help---
-         Enables support for the device present on the PCI bus.
-         This should only be required if you happen to have the eval kit from
-         NXP and you are going to test it.
-
-config USB_ISP1760_OF
-       bool "Support for the OF platform bus"
-       depends on USB_ISP1760_HCD && PPC_OF
-       ---help---
-         Enables support for the device present on the PowerPC
-         OpenFirmware platform bus.
+         module will be called isp1760.
 
 config USB_OHCI_HCD
        tristate "OHCI HCD support"
        depends on USB && USB_ARCH_HAS_OHCI
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
-       select I2C if ARCH_PNX4008
        ---help---
          The Open Host Controller Interface (OHCI) is a standard for accessing
          USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -305,3 +293,31 @@ config SUPERH_ON_CHIP_R8A66597
        help
           This driver enables support for the on-chip R8A66597 in the
           SH7366 and SH7723 processors.
+
+config USB_WHCI_HCD
+       tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       depends on PCI && USB
+       select USB_WUSB
+       select UWB_WHCI
+       help
+         A driver for PCI-based Wireless USB Host Controllers that are
+         compliant with the WHCI specification.
+
+         To compile this driver a module, choose M here: the module
+         will be called "whci-hcd".
+
+config USB_HWA_HCD
+       tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       depends on USB
+       select USB_WUSB
+       select UWB_HWA
+       help
+         This driver enables you to connect Wireless USB devices to
+         your system using a Host Wire Adaptor USB dongle. This is an
+         UWB Radio Controller and WUSB Host Controller connected to
+         your machine via USB (specified in WUSB1.0).
+
+         To compile this driver a module, choose M here: the module
+         will be called "hwa-hc".