comment "USB Host Controller Drivers"
depends on USB
+config USB_C67X00_HCD
+ tristate "Cypress C67x00 HCD support"
+ depends on USB
+ help
+ The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+ host/peripheral/OTG USB controllers.
+
+ Enable this option to support this chip in host controller mode.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called c67x00.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && USB_ARCH_HAS_EHCI
To compile this driver as a module, choose M here: the
module will be called isp116x-hcd.
+config USB_ISP1760_HCD
+ tristate "ISP 1760 HCD support"
+ depends on USB && EXPERIMENTAL
+ ---help---
+ The ISP1760 chip is a USB 2.0 host controller.
+
+ This driver does not support isochronous transfers or OTG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called isp1760-hcd.
+
+config USB_ISP1760_PCI
+ bool "Support for the PCI bus"
+ depends on USB_ISP1760_HCD && PCI
+ ---help---
+ Enables support for the device present on the PCI bus.
+ This should only be required if you happen to have the eval kit from
+ NXP and you are going to test it.
+
+config USB_ISP1760_OF
+ bool "Support for the OF platform bus"
+ depends on USB_ISP1760_HCD && PPC_OF
+ ---help---
+ Enables support for the device present on the PowerPC
+ OpenFirmware platform bus.
+
config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
- select I2C if ARCH_PNX4008
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
module will be called r8a66597-hcd.
config SUPERH_ON_CHIP_R8A66597
- boolean "Enable SuperH on-chip USB like the R8A66597"
- depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+ boolean "Enable SuperH on-chip R8A66597 USB"
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+ help
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
+
+config USB_WHCI_HCD
+ tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on PCI && USB
+ select USB_WUSB
+ select UWB_WHCI
help
- Renesas SuperH processor has USB like the R8A66597.
- This driver supported processor is SH7366.
+ A driver for PCI-based Wireless USB Host Controllers that are
+ compliant with the WHCI specification.
+
+ To compile this driver a module, choose M here: the module
+ will be called "whci-hcd".
+
+config USB_HWA_HCD
+ tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on USB
+ select USB_WUSB
+ select UWB_HWA
+ help
+ This driver enables you to connect Wireless USB devices to
+ your system using a Host Wire Adaptor USB dongle. This is an
+ UWB Radio Controller and WUSB Host Controller connected to
+ your machine via USB (specified in WUSB1.0).
+
+ To compile this driver a module, choose M here: the module
+ will be called "hwa-hc".