#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/device.h>
+#include <linux/usb/quirks.h>
#include <asm/byteorder.h>
#include <asm/scatterlist.h>
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT) {
+ int interval;
+
+ if (usb_dev->speed == USB_SPEED_HIGH)
+ interval = 1 << min(15, ep->desc.bInterval - 1);
+ else
+ interval = ep->desc.bInterval;
pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
usb_fill_int_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL,
- ep->desc.bInterval);
+ usb_api_blocking_completion, NULL, interval);
} else
usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
usb_api_blocking_completion, NULL);
/* Try to read the string descriptor by asking for the maximum
* possible number of bytes */
- rc = usb_get_string(dev, langid, index, buf, 255);
+ if (dev->quirks & USB_QUIRK_STRING_FETCH_255)
+ rc = -EIO;
+ else
+ rc = usb_get_string(dev, langid, index, buf, 255);
/* If that failed try to read the descriptor length, then
* ask for just that many bytes */
return 0;
}
-static void release_interface(struct device *dev)
+void usb_release_interface(struct device *dev)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usb_interface_cache *intfc =
kfree(intf);
}
+#ifdef CONFIG_HOTPLUG
+static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct usb_device *usb_dev;
+ struct usb_interface *intf;
+ struct usb_host_interface *alt;
+ int i = 0;
+ int length = 0;
+
+ if (!dev)
+ return -ENODEV;
+
+ /* driver is often null here; dev_dbg() would oops */
+ pr_debug ("usb %s: uevent\n", dev->bus_id);
+
+ intf = to_usb_interface(dev);
+ usb_dev = interface_to_usbdev(intf);
+ alt = intf->cur_altsetting;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+
+ envp[i] = NULL;
+ return 0;
+}
+
+#else
+
+static int usb_if_uevent(struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_HOTPLUG */
+
+struct device_type usb_if_device_type = {
+ .name = "usb_interface",
+ .release = usb_release_interface,
+ .uevent = usb_if_uevent,
+};
+
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
* use this kind of configurability; many devices only have one
* configuration.
*
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured. However some devices erroneously use 0 as one of their
+ * configuration values. To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
* USB device configurations may affect Linux interoperability,
* power consumption and the functionality available. For example,
* the default configuration is limited to using 100mA of bus power,
*
* This call is synchronous. The calling context must be able to sleep,
* must own the device lock, and must not hold the driver model's USB
- * bus rwsem; usb device driver probe() methods cannot use this routine.
+ * bus mutex; usb device driver probe() methods cannot use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On successful completion, each interface
struct usb_interface **new_interfaces = NULL;
int n, nintf;
- for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
- if (dev->config[i].desc.bConfigurationValue == configuration) {
- cp = &dev->config[i];
- break;
+ if (configuration == -1)
+ configuration = 0;
+ else {
+ for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+ if (dev->config[i].desc.bConfigurationValue ==
+ configuration) {
+ cp = &dev->config[i];
+ break;
+ }
}
}
if ((!cp && configuration != 0))
/* The USB spec says configuration 0 means unconfigured.
* But if a device includes a configuration numbered 0,
* we will accept it as a correctly configured state.
+ * Use -1 if you really want to unconfigure the device.
*/
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
+ intf->dev.type = &usb_if_device_type;
intf->dev.dma_mask = dev->dev.dma_mask;
- intf->dev.release = release_interface;
device_initialize (&intf->dev);
mark_quiesced(intf);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
projects / linux-2.6-omap-h63xx.git / blobdiff