* way to bind to an interface is to return the private data from
* the driver's probe() method.
*
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver probe() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver probe() entries don't need
+ * extra locking, but other call contexts may need to explicitly claim that
+ * lock.
*/
int usb_driver_claim_interface(struct usb_driver *driver,
struct usb_interface *iface, void* priv)
* also causes the driver disconnect() method to be called.
*
* This call is synchronous, and may not be used in an interrupt context.
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver disconnect() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver disconnect() entries don't
+ * need extra locking, but other call contexts may need to explicitly claim
+ * that lock.
*/
void usb_driver_release_interface(struct usb_driver *driver,
struct usb_interface *iface)
}
#ifdef CONFIG_HOTPLUG
-
-/*
- * This sends an uevent to userspace, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- * We're called either from khubd (the typical case) or from root hub
- * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
- * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
- * device (and this configuration!) are still present.
- */
static int usb_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
{
- struct usb_interface *intf;
struct usb_device *usb_dev;
- struct usb_host_interface *alt;
int i = 0;
int length = 0;
/* driver is often null here; dev_dbg() would oops */
pr_debug ("usb %s: uevent\n", dev->bus_id);
- if (is_usb_device(dev)) {
+ if (is_usb_device(dev))
usb_dev = to_usb_device(dev);
- alt = NULL;
- } else {
- intf = to_usb_interface(dev);
+ else {
+ struct usb_interface *intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
- alt = intf->cur_altsetting;
}
if (usb_dev->devnum < 0) {
#ifdef CONFIG_USB_DEVICEFS
/* If this is available, userspace programs can directly read
* all the device descriptors we don't tell them about. Or
- * even act as usermode drivers.
- *
- * FIXME reduce hardwired intelligence here
+ * act as usermode drivers.
*/
if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (!is_usb_device(dev)) {
-
- if (add_uevent_var(envp, num_envp, &i,
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
+ "BUSNUM=%03d",
+ usb_dev->bus->busnum))
+ return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- }
+ "DEVNUM=%03d",
+ usb_dev->devnum))
+ return -ENOMEM;
envp[i] = NULL;
-
return 0;
}
#else
static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+ int num_envp, char *buffer, int buffer_size)
{
return -ENODEV;
}
-
#endif /* CONFIG_HOTPLUG */
/**
done:
// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
- if (status == 0)
+ if (status == 0) {
+ udev->autoresume_disabled = 0;
udev->dev.power.power_state.event = PM_EVENT_ON;
+ }
return status;
}
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
- if (!udev->autosuspend_delay)
+ if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)
return -EPERM;
if (udev->actconfig) {
*
* This routine can run only in process context.
*/
-int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
int i = 0;
*
* This routine can run only in process context.
*/
-int usb_resume_both(struct usb_device *udev)
+static int usb_resume_both(struct usb_device *udev)
{
int status = 0;
int i;
struct usb_interface *intf;
struct usb_device *parent = udev->parent;
+ if (udev->auto_pm && udev->autoresume_disabled)
+ return -EPERM;
cancel_delayed_work(&udev->autosuspend);
if (udev->state == USB_STATE_NOTATTACHED)
return -ENODEV;
#ifdef CONFIG_USB_SUSPEND
+/* usb_autosuspend_work - callback routine to autosuspend a USB device */
+void usb_autosuspend_work(struct work_struct *work)
+{
+ struct usb_device *udev =
+ container_of(work, struct usb_device, autosuspend.work);
+
+ usb_pm_lock(udev);
+ udev->auto_pm = 1;
+ usb_suspend_both(udev, PMSG_SUSPEND);
+ usb_pm_unlock(udev);
+}
+
/* Internal routine to adjust a device's usage counter and change
* its autosuspend state.
*/
}
EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
+#else
+
+void usb_autosuspend_work(struct work_struct *work)
+{}
+
#endif /* CONFIG_USB_SUSPEND */
-static int usb_suspend(struct device *dev, pm_message_t message)
+/**
+ * usb_external_suspend_device - external suspend of a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This routine handles external suspend requests: ones not generated
+ * internally by a USB driver (autosuspend) but rather coming from the user
+ * (via sysfs) or the PM core (system sleep). The suspend will be carried
+ * out regardless of @udev's usage counter or those of its interfaces,
+ * and regardless of whether or not remote wakeup is enabled. Of course,
+ * interface drivers still have the option of failing the suspend (if
+ * there are unsuspended children, for example).
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_suspend_both(udev, message);
- usb_pm_unlock(udev);
- } else
- status = 0;
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_suspend_both(udev, msg);
+ usb_pm_unlock(udev);
return status;
}
-static int usb_resume(struct device *dev)
+/**
+ * usb_external_resume_device - external resume of a USB device and its interfaces
+ * @udev: the usb_device to resume
+ *
+ * This routine handles external resume requests: ones not generated
+ * internally by a USB driver (autoresume) but rather coming from the user
+ * (via sysfs), the PM core (system resume), or the device itself (remote
+ * wakeup). @udev's usage counter is unaffected.
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_resume_device(struct usb_device *udev)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_resume_both(udev);
- usb_pm_unlock(udev);
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_resume_both(udev);
+ usb_pm_unlock(udev);
- /* Rebind drivers that had no suspend method? */
- } else
- status = 0;
+ /* Now that the device is awake, we can start trying to autosuspend
+ * it again. */
+ if (status == 0)
+ usb_try_autosuspend_device(udev);
return status;
}
+static int usb_suspend(struct device *dev, pm_message_t message)
+{
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ return usb_external_suspend_device(to_usb_device(dev), message);
+}
+
+static int usb_resume(struct device *dev)
+{
+ struct usb_device *udev;
+
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ udev = to_usb_device(dev);
+ if (udev->autoresume_disabled)
+ return -EPERM;
+ return usb_external_resume_device(udev);
+}
+
+#else
+
+#define usb_suspend NULL
+#define usb_resume NULL
+
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
-#ifdef CONFIG_PM
.suspend = usb_suspend,
.resume = usb_resume,
-#endif
};
projects / linux-2.6-omap-h63xx.git / blobdiff