]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/staging/wlan-ng/wlan_compat.h
Merge branch 'omap-pool'
[linux-2.6-omap-h63xx.git] / drivers / staging / wlan-ng / wlan_compat.h
diff --git a/drivers/staging/wlan-ng/wlan_compat.h b/drivers/staging/wlan-ng/wlan_compat.h
deleted file mode 100644 (file)
index 8b8a510..0000000
+++ /dev/null
@@ -1,193 +0,0 @@
-/* wlan_compat.h
-*
-* Types and macros to aid in portability
-*
-* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-*   The contents of this file are subject to the Mozilla Public
-*   License Version 1.1 (the "License"); you may not use this file
-*   except in compliance with the License. You may obtain a copy of
-*   the License at http://www.mozilla.org/MPL/
-*
-*   Software distributed under the License is distributed on an "AS
-*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*   implied. See the License for the specific language governing
-*   rights and limitations under the License.
-*
-*   Alternatively, the contents of this file may be used under the
-*   terms of the GNU Public License version 2 (the "GPL"), in which
-*   case the provisions of the GPL are applicable instead of the
-*   above.  If you wish to allow the use of your version of this file
-*   only under the terms of the GPL and not to allow others to use
-*   your version of this file under the MPL, indicate your decision
-*   by deleting the provisions above and replace them with the notice
-*   and other provisions required by the GPL.  If you do not delete
-*   the provisions above, a recipient may use your version of this
-*   file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*
-* Inquiries regarding the linux-wlan Open Source project can be
-* made directly to:
-*
-* AbsoluteValue Systems Inc.
-* info@linux-wlan.com
-* http://www.linux-wlan.com
-*
-* --------------------------------------------------------------------
-*
-* Portions of the development of this software were funded by
-* Intersil Corporation as part of PRISM(R) chipset product development.
-*
-* --------------------------------------------------------------------
-*/
-
-#ifndef _WLAN_COMPAT_H
-#define _WLAN_COMPAT_H
-
-/*=============================================================*/
-/*------ Bit settings -----------------------------------------*/
-/*=============================================================*/
-
-#define BIT0   0x00000001
-#define BIT1   0x00000002
-#define BIT2   0x00000004
-#define BIT3   0x00000008
-#define BIT4   0x00000010
-#define BIT5   0x00000020
-#define BIT6   0x00000040
-#define BIT7   0x00000080
-#define BIT8   0x00000100
-#define BIT9   0x00000200
-#define BIT10  0x00000400
-#define BIT11  0x00000800
-#define BIT12  0x00001000
-#define BIT13  0x00002000
-#define BIT14  0x00004000
-#define BIT15  0x00008000
-#define BIT16  0x00010000
-#define BIT17  0x00020000
-#define BIT18  0x00040000
-#define BIT19  0x00080000
-#define BIT20  0x00100000
-#define BIT21  0x00200000
-#define BIT22  0x00400000
-#define BIT23  0x00800000
-#define BIT24  0x01000000
-#define BIT25  0x02000000
-#define BIT26  0x04000000
-#define BIT27  0x08000000
-#define BIT28  0x10000000
-#define BIT29  0x20000000
-#define BIT30  0x40000000
-#define BIT31  0x80000000
-
-/*=============================================================*/
-/*------ Compiler Portability Macros --------------------------*/
-/*=============================================================*/
-#define __WLAN_ATTRIB_PACK__           __attribute__ ((packed))
-
-/*=============================================================*/
-/*------ OS Portability Macros --------------------------------*/
-/*=============================================================*/
-
-#ifndef WLAN_DBVAR
-#define WLAN_DBVAR     wlan_debug
-#endif
-
-#define WLAN_RELEASE   "0.3.0-lkml"
-
-#include <linux/hardirq.h>
-
-#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __func__ , ##args);
-
-#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args);
-
-#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __func__ , ##args);
-
-#define WLAN_LOG_INFO(args... ) printk(KERN_INFO args)
-
-#if defined(WLAN_INCLUDE_DEBUG)
-       #define WLAN_HEX_DUMP( l, x, p, n)      if( WLAN_DBVAR >= (l) ){ \
-               int __i__; \
-               printk(KERN_DEBUG x ":"); \
-               for( __i__=0; __i__ < (n); __i__++) \
-                       printk( " %02x", ((u8*)(p))[__i__]); \
-               printk("\n"); }
-       #define DBFENTER { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"---->\n"); } }
-       #define DBFEXIT  { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"<----\n"); } }
-
-       #define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x ,  __func__, (preempt_count() & PREEMPT_MASK), ##args );
-#else
-       #define WLAN_HEX_DUMP( l, s, p, n)
-       #define DBFENTER
-       #define DBFEXIT
-
-       #define WLAN_LOG_DEBUG(l, s, args...)
-#endif
-
-#undef netdevice_t
-typedef struct net_device netdevice_t;
-
-#define URB_ASYNC_UNLINK 0
-#define USB_QUEUE_BULK 0
-
-/*=============================================================*/
-/*------ Hardware Portability Macros --------------------------*/
-/*=============================================================*/
-
-#define ieee2host16(n) __le16_to_cpu(n)
-#define ieee2host32(n) __le32_to_cpu(n)
-#define host2ieee16(n) __cpu_to_le16(n)
-#define host2ieee32(n) __cpu_to_le32(n)
-
-/*=============================================================*/
-/*--- General Macros ------------------------------------------*/
-/*=============================================================*/
-
-#define wlan_max(a, b) (((a) > (b)) ? (a) : (b))
-#define wlan_min(a, b) (((a) < (b)) ? (a) : (b))
-
-#define wlan_isprint(c)        (((c) > (0x19)) && ((c) < (0x7f)))
-
-#define wlan_hexchar(x) (((x) < 0x0a) ? ('0' + (x)) : ('a' + ((x) - 0x0a)))
-
-/* Create a string of printable chars from something that might not be */
-/* It's recommended that the str be 4*len + 1 bytes long */
-#define wlan_mkprintstr(buf, buflen, str, strlen) \
-{ \
-       int i = 0; \
-       int j = 0; \
-       memset(str, 0, (strlen)); \
-       for (i = 0; i < (buflen); i++) { \
-               if ( wlan_isprint((buf)[i]) ) { \
-                       (str)[j] = (buf)[i]; \
-                       j++; \
-               } else { \
-                       (str)[j] = '\\'; \
-                       (str)[j+1] = 'x'; \
-                       (str)[j+2] = wlan_hexchar(((buf)[i] & 0xf0) >> 4); \
-                       (str)[j+3] = wlan_hexchar(((buf)[i] & 0x0f)); \
-                       j += 4; \
-               } \
-       } \
-}
-
-/*=============================================================*/
-/*--- Variables -----------------------------------------------*/
-/*=============================================================*/
-
-#ifdef WLAN_INCLUDE_DEBUG
-extern int wlan_debug;
-#endif
-
-extern int wlan_ethconv;               /* What's the default ethconv? */
-
-/*=============================================================*/
-/*--- Functions -----------------------------------------------*/
-/*=============================================================*/
-#endif /* _WLAN_COMPAT_H */
-