memcpy( pethernet_address, pHwData->PermanentMacAddress, 6 );
}
+static void hal_led_control(unsigned long data)
+{
+ phw_data_t pHwData = (phw_data_t) data;
+ struct wb35_adapter * adapter = pHwData->adapter;
+ struct wb35_reg *reg = &pHwData->reg;
+ u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
+ u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
+ u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
+ u32 TimeInterval = 500, ltmp, ltmp2;
+ ltmp=0;
+
+ if( pHwData->SurpriseRemove ) return;
+
+ if( pHwData->LED_control ) {
+ ltmp2 = pHwData->LED_control & 0xff;
+ if( ltmp2 == 5 ) // 5 is WPS mode
+ {
+ TimeInterval = 100;
+ ltmp2 = (pHwData->LED_control>>8) & 0xff;
+ switch( ltmp2 )
+ {
+ case 1: // [0.2 On][0.1 Off]...
+ pHwData->LED_Blinking %= 3;
+ ltmp = 0x1010; // Led 1 & 0 Green and Red
+ if( pHwData->LED_Blinking == 2 ) // Turn off
+ ltmp = 0;
+ break;
+ case 2: // [0.1 On][0.1 Off]...
+ pHwData->LED_Blinking %= 2;
+ ltmp = 0x0010; // Led 0 red color
+ if( pHwData->LED_Blinking ) // Turn off
+ ltmp = 0;
+ break;
+ case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
+ pHwData->LED_Blinking %= 15;
+ ltmp = 0x0010; // Led 0 red color
+ if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
+ ltmp = 0;
+ break;
+ case 4: // [300 On][ off ]
+ ltmp = 0x1000; // Led 1 Green color
+ if( pHwData->LED_Blinking >= 3000 )
+ ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
+ break;
+ }
+ pHwData->LED_Blinking++;
+
+ reg->U1BC_LEDConfigure = ltmp;
+ if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
+ {
+ reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
+ reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
+ }
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
+ {
+ if( reg->U1BC_LEDConfigure & 0x1010 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x1010;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ else
+ {
+ switch( LEDSet )
+ {
+ case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ //Turn Off LED_0
+ if( reg->U1BC_LEDConfigure & 0x10 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ }
+ else
+ {
+ // Turn On LED_0
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ break;
+
+ case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure &= ~0xf;
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ // 20060901 Gray blinking if in disconnect state and not scanning
+ ltmp = reg->U1BC_LEDConfigure;
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ if( LEDgray2[(pHwData->LED_Blinking%30)] )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
+ }
+ pHwData->LED_Blinking++;
+ if( reg->U1BC_LEDConfigure != ltmp )
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ TimeInterval = 100;
+ }
+ }
+ else
+ {
+ // Turn On LED_0
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ break;
+
+ case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ //Turn Off LED_1
+ if( reg->U1BC_LEDConfigure & 0x1000 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
+ }
+ }
+ }
+ else
+ {
+ // Is transmitting/receiving ??
+ if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) ||
+ (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) )
+ {
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ {
+ reg->U1BC_LEDConfigure |= 0x3000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ }
+
+ // Update variable
+ pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter );
+ pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter );
+ TimeInterval = 200;
+ }
+ else
+ {
+ // Turn On LED_1 and blinking if transmitting/receiving
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x3000;
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ }
+ }
+ }
+ break;
+
+ default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ {
+ reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+
+ if( pHwData->LED_Blinking )
+ {
+ // Gray blinking
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+
+ pHwData->LED_Blinking += 2;
+ if( pHwData->LED_Blinking < 40 )
+ TimeInterval = 100;
+ else
+ {
+ pHwData->LED_Blinking = 0; // Stop blinking
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ break;
+ }
+
+ if( pHwData->LED_LinkOn )
+ {
+ if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
+ {
+ //Try to turn ON LED_0 after gray blinking
+ reg->U1BC_LEDConfigure |= 0x10;
+ pHwData->LED_Blinking = 1; //Start blinking
+ TimeInterval = 50;
+ }
+ }
+ else
+ {
+ if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ break;
+ }
+
+ //20060828.1 Active send null packet to avoid AP disconnect
+ if( pHwData->LED_LinkOn )
+ {
+ pHwData->NullPacketCount += TimeInterval;
+ if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
+ {
+ pHwData->NullPacketCount = 0;
+ }
+ }
+ }
+
+ pHwData->time_count += TimeInterval;
+ Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
+ add_timer(&pHwData->LEDTimer);
+}
+
+
u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter)
{
u16 SoftwareSet;
pHwData->InitialResource = 3;
if (Wb35Rx_initial(pHwData)) {
pHwData->InitialResource = 4;
- OS_TIMER_INITIAL( &pHwData->LEDTimer, hal_led_control, pHwData );
- OS_TIMER_SET( &pHwData->LEDTimer, 1000 ); // 20060623
+ init_timer(&pHwData->LEDTimer);
+ pHwData->LEDTimer.function = hal_led_control;
+ pHwData->LEDTimer.data = (unsigned long) pHwData;
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
+ add_timer(&pHwData->LEDTimer);
//
// For restrict to vendor's hardware
switch( pHwData->InitialResource )
{
case 4:
- case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel );
+ case 3: del_timer_sync(&pHwData->LEDTimer);
msleep(100); // Wait for Timer DPC exit 940623.2
Wb35Rx_destroy( pHwData ); // Release the Rx
case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
pHwData->Wb35Rx.rx_halt = 1;
Wb35Rx_stop( pHwData );
- pHwData->Wb35Tx.tx_halt = 1;
- Wb35Tx_stop( pHwData );
-
- reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
- Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl );
-}
-
-unsigned char hal_idle(phw_data_t pHwData)
-{
- struct wb35_reg *reg = &pHwData->reg;
- PWBUSB pWbUsb = &pHwData->WbUsb;
-
- if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) )
- return false;
-
- return true;
-}
-//---------------------------------------------------------------------------------------------------
-void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min )
-{
- struct wb35_reg *reg = &pHwData->reg;
-
- if( pHwData->SurpriseRemove ) return;
-
- pHwData->cwmin = cwin_min;
- reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14
- reg->M2C_MacControl |= (pHwData->cwmin<<10);
- Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl );
-}
-
-s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count )
-{
- struct wb35_reg *reg = &pHwData->reg;
- R01_DESCRIPTOR r01;
- s32 ltmp = 0, tmp;
- u8 i;
-
- if( pHwData->SurpriseRemove ) return -200;
- if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion
- Count = MAX_ACC_RSSI_COUNT;
-
- // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))
- // C1 = -195, C2 = 0.66 = 85/128
- for (i=0; i<Count; i++)
- {
- r01.value = HalRssiArry[i];
- tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
- ltmp += tmp;
- }
- ltmp /= Count;
- if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;
- if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this
-
- //if( ltmp < -200 ) ltmp = -200;
- if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC
-
- return ltmp;
-}
-//----------------------------------------------------------------------------------------------------
-s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count )
-{
- struct wb35_reg *reg = &pHwData->reg;
- R01_DESCRIPTOR r01;
- s32 ltmp = 0, tmp;
- u8 i, j;
- struct wb35_adapter * adapter = pHwData->adapter;
-// u32 *HalRssiArry = psBSS(idx)->HalRssi;
-
- if( pHwData->SurpriseRemove ) return -200;
- if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion
- Count = MAX_ACC_RSSI_COUNT;
-
- // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))
- // C1 = -195, C2 = 0.66 = 85/128
-#if 0
- for (i=0; i<Count; i++)
- {
- r01.value = HalRssiArry[i];
- tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
- ltmp += tmp;
- }
-#else
- if (psBSS(idx)->HalRssiIndex == 0)
- psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT;
- j = (u8)psBSS(idx)->HalRssiIndex-1;
-
- for (i=0; i<Count; i++)
- {
- r01.value = psBSS(idx)->HalRssi[j];
- tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
- ltmp += tmp;
- if (j == 0)
- {
- j = MAX_ACC_RSSI_COUNT;
- }
- j--;
- }
-#endif
- ltmp /= Count;
- if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;
- if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this
-
- //if( ltmp < -200 ) ltmp = -200;
- if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC
-
- return ltmp;
-}
-
-//---------------------------------------------------------------------------
-void hal_led_control_1a( phw_data_t pHwData )
-{
- hal_led_control( NULL, pHwData, NULL, NULL );
-}
-
-void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 )
-{
- struct wb35_adapter * adapter = pHwData->adapter;
- struct wb35_reg *reg = &pHwData->reg;
- u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
- u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
- u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
- u32 TimeInterval = 500, ltmp, ltmp2;
- ltmp=0;
-
- if( pHwData->SurpriseRemove ) return;
-
- if( pHwData->LED_control ) {
- ltmp2 = pHwData->LED_control & 0xff;
- if( ltmp2 == 5 ) // 5 is WPS mode
- {
- TimeInterval = 100;
- ltmp2 = (pHwData->LED_control>>8) & 0xff;
- switch( ltmp2 )
- {
- case 1: // [0.2 On][0.1 Off]...
- pHwData->LED_Blinking %= 3;
- ltmp = 0x1010; // Led 1 & 0 Green and Red
- if( pHwData->LED_Blinking == 2 ) // Turn off
- ltmp = 0;
- break;
- case 2: // [0.1 On][0.1 Off]...
- pHwData->LED_Blinking %= 2;
- ltmp = 0x0010; // Led 0 red color
- if( pHwData->LED_Blinking ) // Turn off
- ltmp = 0;
- break;
- case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
- pHwData->LED_Blinking %= 15;
- ltmp = 0x0010; // Led 0 red color
- if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
- ltmp = 0;
- break;
- case 4: // [300 On][ off ]
- ltmp = 0x1000; // Led 1 Green color
- if( pHwData->LED_Blinking >= 3000 )
- ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
- break;
- }
- pHwData->LED_Blinking++;
-
- reg->U1BC_LEDConfigure = ltmp;
- if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
- {
- reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
- reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
- }
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
- {
- if( reg->U1BC_LEDConfigure & 0x1010 )
- {
- reg->U1BC_LEDConfigure &= ~0x1010;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- else
- {
- switch( LEDSet )
- {
- case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- //Turn Off LED_0
- if( reg->U1BC_LEDConfigure & 0x10 )
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- }
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- break;
-
- case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure &= ~0xf;
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- // 20060901 Gray blinking if in disconnect state and not scanning
- ltmp = reg->U1BC_LEDConfigure;
- reg->U1BC_LEDConfigure &= ~0x1f;
- if( LEDgray2[(pHwData->LED_Blinking%30)] )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
- }
- pHwData->LED_Blinking++;
- if( reg->U1BC_LEDConfigure != ltmp )
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- TimeInterval = 100;
- }
- }
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- break;
+ pHwData->Wb35Tx.tx_halt = 1;
+ Wb35Tx_stop( pHwData );
- case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- //Turn Off LED_1
- if( reg->U1BC_LEDConfigure & 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- }
- }
- }
- else
- {
- // Is transmitting/receiving ??
- if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) ||
- (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) )
- {
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
+ reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
+ Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl );
+}
- // Update variable
- pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter );
- pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter );
- TimeInterval = 200;
- }
- else
- {
- // Turn On LED_1 and blinking if transmitting/receiving
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x3000;
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
- }
- }
- break;
+unsigned char hal_idle(phw_data_t pHwData)
+{
+ struct wb35_reg *reg = &pHwData->reg;
+ PWBUSB pWbUsb = &pHwData->WbUsb;
- default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
+ if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) )
+ return false;
- if( pHwData->LED_Blinking )
- {
- // Gray blinking
- reg->U1BC_LEDConfigure &= ~0x0f;
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ return true;
+}
+//---------------------------------------------------------------------------------------------------
+void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min )
+{
+ struct wb35_reg *reg = &pHwData->reg;
- pHwData->LED_Blinking += 2;
- if( pHwData->LED_Blinking < 40 )
- TimeInterval = 100;
- else
- {
- pHwData->LED_Blinking = 0; // Stop blinking
- reg->U1BC_LEDConfigure &= ~0x0f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- break;
- }
+ if( pHwData->SurpriseRemove ) return;
- if( pHwData->LED_LinkOn )
- {
- if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
- {
- //Try to turn ON LED_0 after gray blinking
- reg->U1BC_LEDConfigure |= 0x10;
- pHwData->LED_Blinking = 1; //Start blinking
- TimeInterval = 50;
- }
- }
- else
- {
- if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- break;
- }
+ pHwData->cwmin = cwin_min;
+ reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14
+ reg->M2C_MacControl |= (pHwData->cwmin<<10);
+ Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl );
+}
- //20060828.1 Active send null packet to avoid AP disconnect
- if( pHwData->LED_LinkOn )
+s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count )
+{
+ struct wb35_reg *reg = &pHwData->reg;
+ R01_DESCRIPTOR r01;
+ s32 ltmp = 0, tmp;
+ u8 i;
+
+ if( pHwData->SurpriseRemove ) return -200;
+ if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion
+ Count = MAX_ACC_RSSI_COUNT;
+
+ // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))
+ // C1 = -195, C2 = 0.66 = 85/128
+ for (i=0; i<Count; i++)
+ {
+ r01.value = HalRssiArry[i];
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ ltmp += tmp;
+ }
+ ltmp /= Count;
+ if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;
+ if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this
+
+ //if( ltmp < -200 ) ltmp = -200;
+ if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC
+
+ return ltmp;
+}
+//----------------------------------------------------------------------------------------------------
+s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count )
+{
+ struct wb35_reg *reg = &pHwData->reg;
+ R01_DESCRIPTOR r01;
+ s32 ltmp = 0, tmp;
+ u8 i, j;
+ struct wb35_adapter * adapter = pHwData->adapter;
+// u32 *HalRssiArry = psBSS(idx)->HalRssi;
+
+ if( pHwData->SurpriseRemove ) return -200;
+ if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion
+ Count = MAX_ACC_RSSI_COUNT;
+
+ // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))
+ // C1 = -195, C2 = 0.66 = 85/128
+#if 0
+ for (i=0; i<Count; i++)
+ {
+ r01.value = HalRssiArry[i];
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ ltmp += tmp;
+ }
+#else
+ if (psBSS(idx)->HalRssiIndex == 0)
+ psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT;
+ j = (u8)psBSS(idx)->HalRssiIndex-1;
+
+ for (i=0; i<Count; i++)
+ {
+ r01.value = psBSS(idx)->HalRssi[j];
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ ltmp += tmp;
+ if (j == 0)
{
- pHwData->NullPacketCount += TimeInterval;
- if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
- {
- pHwData->NullPacketCount = 0;
- }
+ j = MAX_ACC_RSSI_COUNT;
}
+ j--;
}
+#endif
+ ltmp /= Count;
+ if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;
+ if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this
- pHwData->time_count += TimeInterval;
- Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add
- OS_TIMER_SET( &pHwData->LEDTimer, TimeInterval ); // 20060623.1
+ //if( ltmp < -200 ) ltmp = -200;
+ if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC
+
+ return ltmp;
}
+//---------------------------------------------------------------------------
void hal_set_phy_type( phw_data_t pHwData, u8 PhyType )
{
{
pHwData->LED_Blinking = 0;
pHwData->LED_control = Mode;
- OS_TIMER_SET( &pHwData->LEDTimer, 10 ); // 20060623
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(10);
+ add_timer(&pHwData->LEDTimer);
return true;
}
projects / linux-2.6-omap-h63xx.git / blobdiff