+++ /dev/null
-/*
- * Copyright (C) 1997-2008 Alacritech, Inc. All rights reserved
- *
- * sxgphycode.h:
- *
- * This file PHY microcode and register initialization data.
- */
-
-/**********************************************************************
- * PHY Microcode
- *
- * The following contains both PHY microcode and PHY register
- * initialization data. It is specific to both the PHY and the
- * type of transceiver.
- *
- **********************************************************************/
-
-/*
- * Download for AEL2005C PHY with SR/LR transceiver (10GBASE-SR or 10GBASE-LR)
- */
-static struct PHY_UCODE PhyUcode[] = {
- /*
- * NOTE: An address of 0 is a special case. When the download routine
- * sees an address of 0, it does not write to the PHY. Instead, it
- * delays the download. The length of the delay (in ms) is given in
- * the data field.
- *
- * Delays are required at certain points.
- */
-
- /*
- * Platform-specific MDIO Patches:
- * (include patches for 10G RX polarity flip, 50Mhz Synth, etc)
- */
- /* Addr, Data */
- {0xc017, 0xfeb0}, /* flip RX_LOS polarity (mandatory */
- /* patch for SFP+ applications) */
- {0xC001, 0x0428}, /* flip RX serial polarity */
-
- {0xc013, 0xf341}, /* invert lxmit clock (mandatory patch) */
- {0xc210, 0x8000}, /* reset datapath (mandatory patch) */
- {0xc210, 0x8100}, /* reset datapath (mandatory patch) */
- {0xc210, 0x8000}, /* reset datapath (mandatory patch) */
- {0xc210, 0x0000}, /* reset datapath (mandatory patch) */
- {0x0000, 0x0032}, /* wait for 50ms for datapath reset to */
- /* complete. (mandatory patch) */
-
- /* Configure the LED's */
- {0xc214, 0x0099}, /* configure the LED drivers */
- {0xc216, 0x5f5f}, /* configure the Activity LED */
- {0xc217, 0x33ff}, /* configure the Link LED */
-
- /* Transceiver-specific MDIO Patches: */
- {0xc010, 0x448a}, /* (bit 14) mask out high BER input from the */
- /* LOS signal in 1.000A */
- /* (mandatory patch for SR code) */
- {0xc003, 0x0181}, /* (bit 7) enable the CDR inc setting in */
- /* 1.C005 (mandatory patch for SR code) */
-
- /* Transceiver-specific Microcontroller Initialization: */
- {0xc04a, 0x5200}, /* activate microcontroller and pause */
- {0x0000, 0x0032}, /* wait 50ms for microcontroller before */
- /* writing in code. */
-
- /* code block starts here: */
- {0xcc00, 0x2009},
- {0xcc01, 0x3009},
- {0xcc02, 0x27ff},
- {0xcc03, 0x300f},
- {0xcc04, 0x200c},
- {0xcc05, 0x300c},
- {0xcc06, 0x20c4},
- {0xcc07, 0x3c04},
- {0xcc08, 0x6437},
- {0xcc09, 0x20c4},
- {0xcc0a, 0x3c04},
- {0xcc0b, 0x6437},
- {0xcc0c, 0x25c4},
- {0xcc0d, 0x3c54},
- {0xcc0e, 0x6724},
- {0xcc0f, 0x25c4},
- {0xcc10, 0x3c54},
- {0xcc11, 0x6724},
- {0xcc12, 0x2042},
- {0xcc13, 0x3012},
- {0xcc14, 0x1002},
- {0xcc15, 0x2482},
- {0xcc16, 0x3012},
- {0xcc17, 0x1002},
- {0xcc18, 0x2a32},
- {0xcc19, 0x3002},
- {0xcc1a, 0x1002},
- {0xcc1b, 0x200d},
- {0xcc1c, 0x304d},
- {0xcc1d, 0x2862},
- {0xcc1e, 0x3012},
- {0xcc1f, 0x1002},
- {0xcc20, 0x2982},
- {0xcc21, 0x3002},
- {0xcc22, 0x1002},
- {0xcc23, 0x628f},
- {0xcc24, 0x20a4},
- {0xcc25, 0x3004},
- {0xcc26, 0x6438},
- {0xcc27, 0x20a4},
- {0xcc28, 0x3004},
- {0xcc29, 0x6438},
- {0xcc2a, 0x2015},
- {0xcc2b, 0x3005},
- {0xcc2c, 0x5853},
- {0xcc2d, 0x2bd2},
- {0xcc2e, 0x3002},
- {0xcc2f, 0x1342},
- {0xcc30, 0x200c},
- {0xcc31, 0x300c},
- {0xcc32, 0x2ff7},
- {0xcc33, 0x30f7},
- {0xcc34, 0x20c4},
- {0xcc35, 0x3c04},
- {0xcc36, 0x6724},
- {0xcc37, 0x20c4},
- {0xcc38, 0x3c04},
- {0xcc39, 0x6724},
- {0xcc3a, 0x2d32},
- {0xcc3b, 0x3002},
- {0xcc3c, 0x1002},
- {0xcc3d, 0x2008},
- {0xcc3e, 0x3008},
- {0xcc3f, 0x5c83},
- {0xcc40, 0x2d52},
- {0xcc41, 0x3002},
- {0xcc42, 0x1352},
- {0xcc43, 0x2008},
- {0xcc44, 0x3008},
- {0xcc45, 0x5c83},
- {0xcc46, 0x2d32},
- {0xcc47, 0x3002},
- {0xcc48, 0x1352},
- {0xcc49, 0x201c},
- {0xcc4a, 0x300c},
- {0xcc4b, 0x200d},
- {0xcc4c, 0x310d},
- {0xcc4d, 0x2862},
- {0xcc4e, 0x3012},
- {0xcc4f, 0x1002},
- {0xcc50, 0x2ed2},
- {0xcc51, 0x3002},
- {0xcc52, 0x1342},
- {0xcc53, 0x6f72},
- {0xcc54, 0x1002},
- {0xcc55, 0x628f},
- {0xcc56, 0x2514},
- {0xcc57, 0x3c64},
- {0xcc58, 0x6436},
- {0xcc59, 0x2514},
- {0xcc5a, 0x3c64},
- {0xcc5b, 0x6436},
- {0xcc5c, 0x2fa4},
- {0xcc5d, 0x3cd4},
- {0xcc5e, 0x6624},
- {0xcc5f, 0x2fa4},
- {0xcc60, 0x3cd4},
- {0xcc61, 0x6624},
- {0xcc62, 0x2f45},
- {0xcc63, 0x3015},
- {0xcc64, 0x5653},
- {0xcc65, 0x2eb2},
- {0xcc66, 0x3002},
- {0xcc67, 0x13d2},
- {0xcc68, 0x2ed2},
- {0xcc69, 0x3002},
- {0xcc6a, 0x1002},
- {0xcc6b, 0x6f72},
- {0xcc6c, 0x1002},
- {0xcc6d, 0x628f},
- {0xcc6e, 0x2602},
- {0xcc6f, 0x3012},
- {0xcc70, 0x1002},
- {0xcc71, 0x200d},
- {0xcc72, 0x320d},
- {0xcc73, 0x2862},
- {0xcc74, 0x3012},
- {0xcc75, 0x1002},
- {0xcc76, 0x25c4},
- {0xcc77, 0x3c54},
- {0xcc78, 0x6437},
- {0xcc79, 0x25c4},
- {0xcc7a, 0x3c54},
- {0xcc7b, 0x6437},
- {0xcc7c, 0x20c4},
- {0xcc7d, 0x3c04},
- {0xcc7e, 0x6724},
- {0xcc7f, 0x20c4},
- {0xcc80, 0x3c04},
- {0xcc81, 0x6724},
- {0xcc82, 0x6f72},
- {0xcc83, 0x1002},
- {0xcc84, 0x628f},
- {0xcc85, 0x26f2},
- {0xcc86, 0x3012},
- {0xcc87, 0x1002},
- {0xcc88, 0xc503},
- {0xcc89, 0xd5d5},
- {0xcc8a, 0xc600},
- {0xcc8b, 0x2a6d},
- {0xcc8c, 0xc601},
- {0xcc8d, 0x2a4c},
- {0xcc8e, 0xc602},
- {0xcc8f, 0x0111},
- {0xcc90, 0xc60c},
- {0xcc91, 0x5900},
- {0xcc92, 0xc710},
- {0xcc93, 0x0700},
- {0xcc94, 0xc718},
- {0xcc95, 0x0700},
- {0xcc96, 0xc720},
- {0xcc97, 0x4700},
- {0xcc98, 0xc801},
- {0xcc99, 0x7f50},
- {0xcc9a, 0xc802},
- {0xcc9b, 0x7760},
- {0xcc9c, 0xc803},
- {0xcc9d, 0x7fce},
- {0xcc9e, 0xc804},
- {0xcc9f, 0x5700},
- {0xcca0, 0xc805},
- {0xcca1, 0x5f11},
- {0xcca2, 0xc806},
- {0xcca3, 0x4751},
- {0xcca4, 0xc807},
- {0xcca5, 0x57e1},
- {0xcca6, 0xc808},
- {0xcca7, 0x2700},
- {0xcca8, 0xc809},
- {0xcca9, 0x0000},
- {0xccaa, 0xc821},
- {0xccab, 0x0002},
- {0xccac, 0xc822},
- {0xccad, 0x0014},
- {0xccae, 0xc832},
- {0xccaf, 0x1186},
- {0xccb0, 0xc847},
- {0xccb1, 0x1e02},
- {0xccb2, 0xc013},
- {0xccb3, 0xf341},
- {0xccb4, 0xc01a},
- {0xccb5, 0x0446},
- {0xccb6, 0xc024},
- {0xccb7, 0x1000},
- {0xccb8, 0xc025},
- {0xccb9, 0x0a00},
- {0xccba, 0xc026},
- {0xccbb, 0x0c0c},
- {0xccbc, 0xc027},
- {0xccbd, 0x0c0c},
- {0xccbe, 0xc029},
- {0xccbf, 0x00a0},
- {0xccc0, 0xc030},
- {0xccc1, 0x0a00},
- {0xccc2, 0xc03c},
- {0xccc3, 0x001c},
- {0xccc4, 0xc005},
- {0xccc5, 0x7a06},
- {0xccc6, 0x0000},
- {0xccc7, 0x0000},
- {0xccc8, 0x628f},
- {0xccc9, 0x26f2},
- {0xccca, 0x3012},
- {0xcccb, 0x1002},
- {0xcccc, 0xc620},
- {0xcccd, 0x0000},
- {0xccce, 0xc621},
- {0xcccf, 0x003f},
- {0xccd0, 0xc622},
- {0xccd1, 0x0000},
- {0xccd2, 0xc623},
- {0xccd3, 0x0000},
- {0xccd4, 0xc624},
- {0xccd5, 0x0000},
- {0xccd6, 0xc625},
- {0xccd7, 0x0000},
- {0xccd8, 0xc627},
- {0xccd9, 0x0000},
- {0xccda, 0xc628},
- {0xccdb, 0x0000},
- {0xccdc, 0xc62c},
- {0xccdd, 0x0000},
- {0xccde, 0x0000},
- {0xccdf, 0x0000},
- {0xcce0, 0x628f},
- {0xcce1, 0xd019},
- {0xcce2, 0x26f2},
- {0xcce3, 0x3012},
- {0xcce4, 0x1002},
- {0xcce5, 0xc210},
- {0xcce6, 0x8000},
- {0xcce7, 0xc210},
- {0xcce8, 0x8010},
- {0xcce9, 0xc210},
- {0xccea, 0x8000},
- {0xcceb, 0xc210},
- {0xccec, 0x0000},
- {0xcced, 0x0000},
- {0xccee, 0x0000},
- {0xccef, 0x8221},
- {0xccf0, 0x2752},
- {0xccf1, 0x3012},
- {0xccf2, 0x1002},
- {0xccf3, 0x6f72},
- {0xccf4, 0x1002},
- {0xccf5, 0x2806},
- {0xccf6, 0x3006},
- {0xccf7, 0x2007},
- {0xccf8, 0x3cc7},
- {0xccf9, 0xe161},
- {0xccfa, 0xc171},
- {0xccfb, 0x6134},
- {0xccfc, 0x6135},
- {0xccfd, 0x5453},
- {0xccfe, 0x2858},
- {0xccff, 0x3018},
- {0xcd00, 0x1348},
- {0xcd01, 0x6524},
- {0xcd02, 0x27b8},
- {0xcd03, 0x3018},
- {0xcd04, 0x1008},
- {0xcd05, 0x1002},
- {0xcd06, 0x628f},
- {0xcd07, 0x5dd3},
- {0xcd08, 0x2906},
- {0xcd09, 0x3016},
- {0xcd0a, 0x1306},
- {0xcd0b, 0x2ff7},
- {0xcd0c, 0x30f7},
- {0xcd0d, 0x60b7},
- {0xcd0e, 0xdffd},
- {0xcd0f, 0x0008},
- {0xcd10, 0x6f72},
- {0xcd11, 0x1002},
- {0xcd12, 0x0000},
- {0xcdff, 0x0a01},
- /* end of code block */
-
- /* Unpause the microcontroller to start program */
- {0xca00, 0x0080},
- {0xca12, 0x0000},
- {0x0000, 0x000A}, /* wait 10ms just to be safe */
- {0xffff, 0xffff} /* table terminator */
-};
projects / linux-2.6-omap-h63xx.git / blobdiff