*/
-#define SLIC_DUMP_ENABLED 0
#define KLUDGE_FOR_4GB_BOUNDARY 1
#define DEBUG_MICROCODE 1
-#define SLIC_PRODUCTION_BUILD 1
-#define SLIC_FAILURE_RESET 1
#define DBG 1
-#define SLIC_ASSERT_ENABLED 1
-#define SLIC_GET_STATS_ENABLED 1
-#define SLIC_GET_STATS_TIMER_ENABLED 0
-#define SLIC_PING_TIMER_ENABLED 1
-#define SLIC_POWER_MANAGEMENT_ENABLED 0
#define SLIC_INTERRUPT_PROCESS_LIMIT 1
-#define LINUX_FREES_ADAPTER_RESOURCES 1
#define SLIC_OFFLOAD_IP_CHECKSUM 1
#define STATS_TIMER_INTERVAL 2
#define PING_TIMER_INTERVAL 1
#include <asm/unaligned.h>
#include <linux/ethtool.h>
-#define SLIC_ETHTOOL_SUPPORT 1
-
#include <linux/uaccess.h>
-#include "slicinc.h"
-
-#if SLIC_DUMP_ENABLED
-#include "slicdump.h"
-#endif
+#include "slichw.h"
+#include "slic.h"
+
+static struct net_device_stats *slic_get_stats(struct net_device *dev);
+static int slic_entry_open(struct net_device *dev);
+static int slic_entry_halt(struct net_device *dev);
+static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int slic_xmit_start(struct sk_buff *skb, struct net_device *dev);
+static void slic_xmit_fail(struct adapter *adapter, struct sk_buff *skb,
+ void *cmd, u32 skbtype, u32 status);
+static void slic_config_pci(struct pci_dev *pcidev);
+static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter);
+static int slic_mac_set_address(struct net_device *dev, void *ptr);
+static void slic_link_event_handler(struct adapter *adapter);
+static void slic_upr_request_complete(struct adapter *adapter, u32 isr);
+static int slic_rspqueue_init(struct adapter *adapter);
+static void slic_rspqueue_free(struct adapter *adapter);
+static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter);
+static int slic_cmdq_init(struct adapter *adapter);
+static void slic_cmdq_free(struct adapter *adapter);
+static void slic_cmdq_reset(struct adapter *adapter);
+static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page);
+static void slic_cmdq_getdone(struct adapter *adapter);
+static void slic_cmdq_putdone_irq(struct adapter *adapter,
+ struct slic_hostcmd *cmd);
+static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter);
+static int slic_rcvqueue_init(struct adapter *adapter);
+static int slic_rcvqueue_fill(struct adapter *adapter);
+static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb);
+static void slic_rcvqueue_free(struct adapter *adapter);
+static void slic_adapter_set_hwaddr(struct adapter *adapter);
+static int slic_card_init(struct sliccard *card, struct adapter *adapter);
+static void slic_intagg_set(struct adapter *adapter, u32 value);
+static int slic_card_download(struct adapter *adapter);
+static u32 slic_card_locate(struct adapter *adapter);
+static int slic_if_init(struct adapter *adapter);
+static int slic_adapter_allocresources(struct adapter *adapter);
+static void slic_adapter_freeresources(struct adapter *adapter);
+static void slic_link_config(struct adapter *adapter, u32 linkspeed,
+ u32 linkduplex);
+static void slic_unmap_mmio_space(struct adapter *adapter);
+static void slic_card_cleanup(struct sliccard *card);
+static void slic_soft_reset(struct adapter *adapter);
+static bool slic_mac_filter(struct adapter *adapter,
+ struct ether_header *ether_frame);
+static void slic_mac_address_config(struct adapter *adapter);
+static void slic_mac_config(struct adapter *adapter);
+static void slic_mcast_set_mask(struct adapter *adapter);
+static void slic_config_set(struct adapter *adapter, bool linkchange);
+static void slic_config_clear(struct adapter *adapter);
+static void slic_config_get(struct adapter *adapter, u32 config,
+ u32 configh);
+static void slic_timer_load_check(ulong context);
+static void slic_assert_fail(void);
+static ushort slic_eeprom_cksum(char *m, int len);
+static void slic_upr_start(struct adapter *adapter);
+static void slic_link_upr_complete(struct adapter *adapter, u32 Isr);
+static int slic_upr_request(struct adapter *adapter, u32 upr_request,
+ u32 upr_data, u32 upr_data_h, u32 upr_buffer,
+ u32 upr_buffer_h);
+static void slic_mcast_set_list(struct net_device *dev);
-#define SLIC_POWER_MANAGEMENT 0
static uint slic_first_init = 1;
static char *slic_banner = "Alacritech SLIC Technology(tm) Server "\
- "and Storage Accelerator (Non-Accelerated)\n";
+ "and Storage Accelerator (Non-Accelerated)";
static char *slic_proc_version = "2.0.351 2006/07/14 12:26:00";
static char *slic_product_name = "SLIC Technology(tm) Server "\
static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
static int intagg_delay = 100;
static u32 dynamic_intagg;
-static int errormsg;
-static int goodmsg;
static unsigned int rcv_count;
static struct dentry *slic_debugfs;
MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
+#ifdef ASSERT
+#undef ASSERT
+#endif
+
+#ifndef ASSERT
+#define ASSERT(a) do { \
+ if (!(a)) { \
+ printk(KERN_ERR "slicoss ASSERT() Failure: function %s" \
+ "line %d\n", __func__, __LINE__); \
+ slic_assert_fail(); \
+ } \
+} while (0)
+#endif
+
+
#define SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle) \
{ \
spin_lock_irqsave(&_adapter->handle_lock.lock, \
static void slic_debug_card_create(struct sliccard *card);
static void slic_debug_card_destroy(struct sliccard *card);
-static inline void slic_reg32_write(void __iomem *reg, u32 value, uint flush)
+static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
{
writel(value, reg);
if (flush)
mb();
}
-static inline void slic_reg64_write(struct adapter *adapter,
- void __iomem *reg,
- u32 value,
- void __iomem *regh, u32 paddrh, uint flush)
+static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
+ u32 value, void __iomem *regh, u32 paddrh,
+ bool flush)
{
spin_lock_irqsave(&adapter->bit64reglock.lock,
adapter->bit64reglock.flags);
static void slic_init_driver(void)
{
if (slic_first_init) {
- DBG_MSG("slicoss: %s slic_first_init set jiffies[%lx]\n",
- __func__, jiffies);
slic_first_init = 0;
spin_lock_init(&slic_global.driver_lock.lock);
slic_debug_init();
}
}
-static void slic_dbg_macaddrs(struct adapter *adapter)
-{
- DBG_MSG(" (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
- DBG_MSG(" (%s) mac %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- adapter->netdev->name, adapter->macaddr[0],
- adapter->macaddr[1], adapter->macaddr[2],
- adapter->macaddr[3], adapter->macaddr[4], adapter->macaddr[5]);
- return;
-}
-
-#ifdef DEBUG_REGISTER_TRACE
-static void slic_dbg_register_trace(struct adapter *adapter,
- struct sliccard *card)
-{
- uint i;
-
- DBG_ERROR("Dump Register Write Trace: curr_ix == %d\n", card->debug_ix);
- for (i = 0; i < 32; i++) {
- DBG_ERROR("%2d %d %4x %x %x\n",
- i, card->reg_type[i], card->reg_offset[i],
- card->reg_value[i], card->reg_valueh[i]);
- }
-}
-#endif
-
static void slic_init_adapter(struct net_device *netdev,
struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry,
ushort index;
struct slic_handle *pslic_handle;
struct adapter *adapter = (struct adapter *)netdev_priv(netdev);
-/*
- DBG_MSG("slicoss: %s (%s)\n netdev [%p]\n adapter[%p]\n "
- "pcidev [%p]\n", __func__, netdev->name, netdev, adapter, pcidev);*/
+
/* adapter->pcidev = pcidev;*/
adapter->vendid = pci_tbl_entry->vendor;
adapter->devid = pci_tbl_entry->device;
pslic_handle->next = adapter->pfree_slic_handles;
adapter->pfree_slic_handles = pslic_handle;
}
-/*
- DBG_MSG(".........\nix[%d] phandle[%p] pfree[%p] next[%p]\n",
- index, pslic_handle, adapter->pfree_slic_handles, pslic_handle->next);*/
adapter->pshmem = (struct slic_shmem *)
pci_alloc_consistent(adapter->pcidev,
sizeof(struct slic_shmem),
&adapter->
phys_shmem);
-/*
- DBG_MSG("slicoss: %s (%s)\n pshmem [%p]\n phys_shmem[%p]\n"\
- "slic_regs [%p]\n", __func__, netdev->name, adapter->pshmem,
- (void *)adapter->phys_shmem, adapter->slic_regs);
-*/
ASSERT(adapter->pshmem);
memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
{
static int cards_found;
static int did_version;
- int err;
+ int err = -ENODEV;
struct net_device *netdev;
struct adapter *adapter;
void __iomem *memmapped_ioaddr = NULL;
ulong mmio_len = 0;
struct sliccard *card = NULL;
- DBG_MSG("slicoss: %s 2.6 VERSION ENTER jiffies[%lx] cpu %d\n",
- __func__, jiffies, smp_processor_id());
-
slic_global.dynamic_intagg = dynamic_intagg;
err = pci_enable_device(pcidev);
- DBG_MSG("Call pci_enable_device(%p) status[%x]\n", pcidev, err);
if (err)
return err;
if (slic_debug > 0 && did_version++ == 0) {
- printk(slic_banner);
- printk(slic_proc_version);
+ printk(KERN_DEBUG "%s\n", slic_banner);
+ printk(KERN_DEBUG "%s\n", slic_proc_version);
}
- err = pci_set_dma_mask(pcidev, DMA_64BIT_MASK);
- if (!err) {
- DBG_MSG("pci_set_dma_mask(DMA_64BIT_MASK) successful\n");
- } else {
- err = pci_set_dma_mask(pcidev, DMA_32BIT_MASK);
- if (err) {
- DBG_MSG
- ("No usable DMA configuration, aborting err[%x]\n",
- err);
- return err;
- }
- DBG_MSG("pci_set_dma_mask(DMA_32BIT_MASK) successful\n");
+ err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(64));
+ if (err) {
+ err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
+ if (err)
+ goto err_out_disable_pci;
}
- DBG_MSG("Call pci_request_regions\n");
-
err = pci_request_regions(pcidev, DRV_NAME);
- if (err) {
- DBG_MSG("pci_request_regions FAILED err[%x]\n", err);
- return err;
- }
+ if (err)
+ goto err_out_disable_pci;
- DBG_MSG("call pci_set_master\n");
pci_set_master(pcidev);
- DBG_MSG("call alloc_etherdev\n");
netdev = alloc_etherdev(sizeof(struct adapter));
if (!netdev) {
err = -ENOMEM;
goto err_out_exit_slic_probe;
}
- DBG_MSG("alloc_etherdev for slic netdev[%p]\n", netdev);
SET_NETDEV_DEV(netdev, &pcidev->dev);
mmio_start = pci_resource_start(pcidev, 0);
mmio_len = pci_resource_len(pcidev, 0);
- DBG_MSG("slicoss: call ioremap(mmio_start[%lx], mmio_len[%lx])\n",
- mmio_start, mmio_len);
-/* memmapped_ioaddr = (u32)ioremap_nocache(mmio_start, mmio_len);*/
+/* memmapped_ioaddr = (u32)ioremap_nocache(mmio_start, mmio_len);*/
memmapped_ioaddr = ioremap(mmio_start, mmio_len);
- DBG_MSG("slicoss: %s MEMMAPPED_IOADDR [%p]\n", __func__,
- memmapped_ioaddr);
if (!memmapped_ioaddr) {
- DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n",
- __func__, mmio_len, mmio_start);
- goto err_out_free_mmio_region;
+ dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
+ mmio_len, mmio_start);
+ goto err_out_free_netdev;
}
- DBG_MSG
- ("slicoss: %s found Alacritech SLICOSS PCI, MMIO at %p, "\
- "start[%lx] len[%lx], IRQ %d.\n",
- __func__, memmapped_ioaddr, mmio_start, mmio_len, pcidev->irq);
-
slic_config_pci(pcidev);
slic_init_driver();
status = slic_card_locate(adapter);
if (status) {
- DBG_ERROR("%s cannot locate card\n", __func__);
+ dev_err(&pcidev->dev, "cannot locate card\n");
goto err_out_free_mmio_region;
}
adapter->allocated = 1;
}
- DBG_MSG("slicoss: %s card: %p\n", __func__,
- adapter->card);
- DBG_MSG("slicoss: %s card->adapter[%d] == [%p]\n", __func__,
- (uint) adapter->port, adapter);
- DBG_MSG("slicoss: %s card->adapters_allocated [%d]\n", __func__,
- card->adapters_allocated);
- DBG_MSG("slicoss: %s card->adapters_activated [%d]\n", __func__,
- card->adapters_activated);
-
status = slic_card_init(card, adapter);
if (status != STATUS_SUCCESS) {
card->state = CARD_FAIL;
adapter->state = ADAPT_FAIL;
adapter->linkstate = LINK_DOWN;
- DBG_ERROR("slic_card_init FAILED status[%x]\n", status);
+ dev_err(&pcidev->dev, "FAILED status[%x]\n", status);
} else {
slic_adapter_set_hwaddr(adapter);
}
netdev->hard_start_xmit = slic_xmit_start;
netdev->do_ioctl = slic_ioctl;
netdev->set_mac_address = slic_mac_set_address;
-#if SLIC_GET_STATS_ENABLED
netdev->get_stats = slic_get_stats;
-#endif
netdev->set_multicast_list = slic_mcast_set_list;
slic_debug_adapter_create(adapter);
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err) {
- DBG_ERROR("Cannot register net device, aborting.\n");
+ dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
goto err_out_unmap;
}
- DBG_MSG
- ("slicoss: addr 0x%lx, irq %d, MAC addr "\
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- mmio_start, /*pci_resource_start(pcidev, 0), */ pcidev->irq,
- netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
- netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
-
cards_found++;
- DBG_MSG("slicoss: %s EXIT status[%x] jiffies[%lx] cpu %d\n",
- __func__, status, jiffies, smp_processor_id());
return status;
err_out_unmap:
iounmap(memmapped_ioaddr);
-
err_out_free_mmio_region:
release_mem_region(mmio_start, mmio_len);
-
+err_out_free_netdev:
+ free_netdev(netdev);
err_out_exit_slic_probe:
pci_release_regions(pcidev);
- DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __func__, jiffies,
- smp_processor_id());
-
- return -ENODEV;
+err_out_disable_pci:
+ pci_disable_device(pcidev);
+ return err;
}
static int slic_entry_open(struct net_device *dev)
ASSERT(adapter);
ASSERT(card);
- DBG_MSG
- ("slicoss: %s adapter->activated[%d] card->adapters[%x] "\
- "allocd[%x]\n", __func__, adapter->activated,
- card->adapters_activated,
- card->adapters_allocated);
- DBG_MSG
- ("slicoss: %s (%s): [jiffies[%lx] cpu %d] dev[%p] adapt[%p] "\
- "port[%d] card[%p]\n",
- __func__, adapter->netdev->name, jiffies, smp_processor_id(),
- adapter->netdev, adapter, adapter->port, card);
netif_stop_queue(adapter->netdev);
}
return status;
}
- DBG_MSG("slicoss: %s set card->master[%p] adapter[%p]\n", __func__,
- card->master, adapter);
if (!card->master)
card->master = adapter;
-#if SLIC_DUMP_ENABLED
- if (!(card->dumpthread_running))
- init_waitqueue_head(&card->dump_wq);
-#endif
if (locked) {
spin_unlock_irqrestore(&slic_global.driver_lock.lock,
slic_global.driver_lock.flags);
locked = 0;
}
-#if SLIC_DUMP_ENABLED
- if (!(card->dumpthread_running)) {
- DBG_MSG("attempt to initialize dump thread\n");
- status = slic_init_dump_thread(card);
- /*
- Even if the dump thread fails, we will continue at this point
- */
- }
-#endif
return STATUS_SUCCESS;
}
struct mcast_address *mcaddr, *mlist;
ASSERT(adapter);
- DBG_MSG("slicoss: %s ENTER dev[%p] adapter[%p]\n", __func__, dev,
- adapter);
slic_adapter_freeresources(adapter);
slic_unmap_mmio_space(adapter);
- DBG_MSG("slicoss: %s unregister_netdev\n", __func__);
unregister_netdev(dev);
mmio_start = pci_resource_start(pcidev, 0);
mmio_len = pci_resource_len(pcidev, 0);
- DBG_MSG("slicoss: %s rel_region(0) start[%x] len[%x]\n", __func__,
- mmio_start, mmio_len);
release_mem_region(mmio_start, mmio_len);
- DBG_MSG("slicoss: %s iounmap dev->base_addr[%x]\n", __func__,
- (uint) dev->base_addr);
iounmap((void __iomem *)dev->base_addr);
/* free multicast addresses */
mlist = adapter->mcastaddrs;
ASSERT(card->adapters_allocated);
card->adapters_allocated--;
adapter->allocated = 0;
- DBG_MSG
- ("slicoss: %s init[%x] alloc[%x] card[%p] adapter[%p]\n",
- __func__, card->adapters_activated, card->adapters_allocated,
- card, adapter);
if (!card->adapters_allocated) {
struct sliccard *curr_card = slic_global.slic_card;
if (curr_card == card) {
slic_global.num_slic_cards--;
slic_card_cleanup(card);
}
- DBG_MSG("slicoss: %s deallocate device\n", __func__);
kfree(dev);
pci_release_regions(pcidev);
- DBG_MSG("slicoss: %s EXIT\n", __func__);
}
static int slic_entry_halt(struct net_device *dev)
spin_lock_irqsave(&slic_global.driver_lock.lock,
slic_global.driver_lock.flags);
ASSERT(card);
- DBG_MSG("slicoss: %s (%s) ENTER\n", __func__, dev->name);
- DBG_MSG("slicoss: %s (%s) actvtd[%d] alloc[%d] state[%x] adapt[%p]\n",
- __func__, dev->name, card->adapters_activated,
- card->adapters_allocated, card->state, adapter);
- slic_if_stop_queue(adapter);
+ netif_stop_queue(adapter->netdev);
adapter->state = ADAPT_DOWN;
adapter->linkstate = LINK_DOWN;
adapter->upr_list = NULL;
adapter->upr_busy = 0;
adapter->devflags_prev = 0;
- DBG_MSG("slicoss: %s (%s) set adapter[%p] state to ADAPT_DOWN(%d)\n",
- __func__, dev->name, adapter, adapter->state);
ASSERT(card->adapter[adapter->cardindex] == adapter);
- WRITE_REG(slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
adapter->all_reg_writes++;
adapter->icr_reg_writes++;
slic_config_clear(adapter);
- DBG_MSG("slicoss: %s (%s) dev[%p] adapt[%p] card[%p]\n",
- __func__, dev->name, dev, adapter, card);
if (adapter->activated) {
card->adapters_activated--;
slic_global.num_slic_ports_active--;
adapter->activated = 0;
}
#ifdef AUTOMATIC_RESET
- WRITE_REG(slic_regs->slic_reset_iface, 0, FLUSH);
+ slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
#endif
/*
- * Reset the adapter's rsp, cmd, and rcv queues
+ * Reset the adapter's cmd queues
*/
slic_cmdq_reset(adapter);
- slic_rspqueue_reset(adapter);
- slic_rcvqueue_reset(adapter);
#ifdef AUTOMATIC_RESET
- if (!card->adapters_activated) {
-
-#if SLIC_DUMP_ENABLED
- if (card->dumpthread_running) {
- uint status;
- DBG_MSG("attempt to terminate dump thread pid[%x]\n",
- card->dump_task_id);
- status = kill_proc(card->dump_task_id->pid, SIGKILL, 1);
-
- if (!status) {
- int count = 10 * 100;
- while (card->dumpthread_running && --count) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
- }
-
- if (!count) {
- DBG_MSG
- ("slicmon thread cleanup FAILED \
- pid[%x]\n",
- card->dump_task_id->pid);
- }
- }
- }
-#endif
- DBG_MSG("slicoss: %s (%s) initiate CARD_HALT\n", __func__,
- dev->name);
-
+ if (!card->adapters_activated)
slic_card_init(card, adapter);
- }
#endif
- DBG_MSG("slicoss: %s (%s) EXIT\n", __func__, dev->name);
- DBG_MSG("slicoss: %s EXIT\n", __func__);
spin_unlock_irqrestore(&slic_global.driver_lock.lock,
slic_global.driver_lock.flags);
return STATUS_SUCCESS;
static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
+ struct adapter *adapter = (struct adapter *)netdev_priv(dev);
+ struct ethtool_cmd edata;
+ struct ethtool_cmd ecmd;
+ u32 data[7];
+ u32 intagg;
+
ASSERT(rq);
-/*
- DBG_MSG("slicoss: %s cmd[%x] rq[%p] dev[%p]\n", __func__, cmd, rq, dev);
-*/
switch (cmd) {
case SIOCSLICSETINTAGG:
- {
- struct adapter *adapter = (struct adapter *)
- netdev_priv(dev);
- u32 data[7];
- u32 intagg;
-
- if (copy_from_user(data, rq->ifr_data, 28)) {
- DBG_ERROR
- ("copy_from_user FAILED getting initial \
- params\n");
- return -EFAULT;
- }
- intagg = data[0];
- printk(KERN_EMERG
- "%s: set interrupt aggregation to %d\n",
- __func__, intagg);
- slic_intagg_set(adapter, intagg);
- return 0;
- }
-#ifdef SLIC_USER_REQUEST_DUMP_ENABLED
- case SIOCSLICDUMPCARD:
- {
- struct adapter *adapter = netdev_priv(dev);
- struct sliccard *card;
-
- ASSERT(adapter);
- ASSERT(adapter->card)
- card = adapter->card;
-
- DBG_IOCTL("slic_ioctl SIOCSLIC_DUMP_CARD\n");
-
- if (card->dump_requested == SLIC_DUMP_DONE) {
- printk(SLICLEVEL
- "SLIC Card dump to be overwritten\n");
- card->dump_requested = SLIC_DUMP_REQUESTED;
- } else if ((card->dump_requested == SLIC_DUMP_REQUESTED)
- || (card->dump_requested ==
- SLIC_DUMP_IN_PROGRESS)) {
- printk(SLICLEVEL
- "SLIC Card dump Requested but already \
- in progress... ignore\n");
- } else {
- printk(SLICLEVEL
- "SLIC Card #%d Dump Requested\n",
- card->cardnum);
- card->dump_requested = SLIC_DUMP_REQUESTED;
- }
- return 0;
- }
-#endif
+ if (copy_from_user(data, rq->ifr_data, 28))
+ return -EFAULT;
+ intagg = data[0];
+ dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
+ __func__, intagg);
+ slic_intagg_set(adapter, intagg);
+ return 0;
#ifdef SLIC_TRACE_DUMP_ENABLED
case SIOCSLICTRACEDUMP:
{
- ulong data[7];
- ulong value;
-
+ u32 value;
DBG_IOCTL("slic_ioctl SIOCSLIC_TRACE_DUMP\n");
if (copy_from_user(data, rq->ifr_data, 28)) {
return 0;
}
#endif
-#if SLIC_ETHTOOL_SUPPORT
case SIOCETHTOOL:
- {
- struct adapter *adapter = (struct adapter *)
- netdev_priv(dev);
- struct ethtool_cmd data;
- struct ethtool_cmd ecmd;
-
- ASSERT(adapter);
-/* DBG_MSG("slicoss: %s SIOCETHTOOL\n", __func__); */
- if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
+ ASSERT(adapter);
+ if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
+ return -EFAULT;
+
+ if (ecmd.cmd == ETHTOOL_GSET) {
+ edata.supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_MII);
+ edata.port = PORT_MII;
+ edata.transceiver = XCVR_INTERNAL;
+ edata.phy_address = 0;
+ if (adapter->linkspeed == LINK_100MB)
+ edata.speed = SPEED_100;
+ else if (adapter->linkspeed == LINK_10MB)
+ edata.speed = SPEED_10;
+ else
+ edata.speed = 0;
+
+ if (adapter->linkduplex == LINK_FULLD)
+ edata.duplex = DUPLEX_FULL;
+ else
+ edata.duplex = DUPLEX_HALF;
+
+ edata.autoneg = AUTONEG_ENABLE;
+ edata.maxtxpkt = 1;
+ edata.maxrxpkt = 1;
+ if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
return -EFAULT;
- if (ecmd.cmd == ETHTOOL_GSET) {
- data.supported =
- (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_MII);
- data.port = PORT_MII;
- data.transceiver = XCVR_INTERNAL;
- data.phy_address = 0;
- if (adapter->linkspeed == LINK_100MB)
- data.speed = SPEED_100;
- else if (adapter->linkspeed == LINK_10MB)
- data.speed = SPEED_10;
- else
- data.speed = 0;
+ } else if (ecmd.cmd == ETHTOOL_SSET) {
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
- if (adapter->linkduplex == LINK_FULLD)
- data.duplex = DUPLEX_FULL;
- else
- data.duplex = DUPLEX_HALF;
-
- data.autoneg = AUTONEG_ENABLE;
- data.maxtxpkt = 1;
- data.maxrxpkt = 1;
- if (copy_to_user
- (rq->ifr_data, &data, sizeof(data)))
- return -EFAULT;
-
- } else if (ecmd.cmd == ETHTOOL_SSET) {
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (adapter->linkspeed == LINK_100MB)
- data.speed = SPEED_100;
- else if (adapter->linkspeed == LINK_10MB)
- data.speed = SPEED_10;
- else
- data.speed = 0;
+ if (adapter->linkspeed == LINK_100MB)
+ edata.speed = SPEED_100;
+ else if (adapter->linkspeed == LINK_10MB)
+ edata.speed = SPEED_10;
+ else
+ edata.speed = 0;
- if (adapter->linkduplex == LINK_FULLD)
- data.duplex = DUPLEX_FULL;
+ if (adapter->linkduplex == LINK_FULLD)
+ edata.duplex = DUPLEX_FULL;
+ else
+ edata.duplex = DUPLEX_HALF;
+
+ edata.autoneg = AUTONEG_ENABLE;
+ edata.maxtxpkt = 1;
+ edata.maxrxpkt = 1;
+ if ((ecmd.speed != edata.speed) ||
+ (ecmd.duplex != edata.duplex)) {
+ u32 speed;
+ u32 duplex;
+
+ if (ecmd.speed == SPEED_10)
+ speed = 0;
else
- data.duplex = DUPLEX_HALF;
-
- data.autoneg = AUTONEG_ENABLE;
- data.maxtxpkt = 1;
- data.maxrxpkt = 1;
- if ((ecmd.speed != data.speed) ||
- (ecmd.duplex != data.duplex)) {
- u32 speed;
- u32 duplex;
-
- if (ecmd.speed == SPEED_10) {
- speed = 0;
- SLIC_DISPLAY
- ("%s: slic ETHTOOL set \
- link speed==10MB",
- dev->name);
- } else {
- speed = PCR_SPEED_100;
- SLIC_DISPLAY
- ("%s: slic ETHTOOL set \
- link speed==100MB",
- dev->name);
- }
- if (ecmd.duplex == DUPLEX_FULL) {
- duplex = PCR_DUPLEX_FULL;
- SLIC_DISPLAY
- (": duplex==FULL\n");
- } else {
- duplex = 0;
- SLIC_DISPLAY
- (": duplex==HALF\n");
- }
- slic_link_config(adapter,
- speed, duplex);
- slic_link_event_handler(adapter);
- }
+ speed = PCR_SPEED_100;
+ if (ecmd.duplex == DUPLEX_FULL)
+ duplex = PCR_DUPLEX_FULL;
+ else
+ duplex = 0;
+ slic_link_config(adapter, speed, duplex);
+ slic_link_event_handler(adapter);
}
- return 0;
}
-#endif
+ return 0;
default:
-/* DBG_MSG("slicoss: %s UNSUPPORTED[%x]\n", __func__, cmd); */
return -EOPNOTSUPP;
}
}
card = adapter->card;
ASSERT(card);
-/*
- DBG_ERROR("xmit_start (%s) ENTER skb[%p] len[%d] linkstate[%x] state[%x]\n",
- adapter->netdev->name, skb, skb->len, adapter->linkstate,
- adapter->state);
-*/
if ((adapter->linkstate != LINK_UP) ||
(adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
status = XMIT_FAIL_LINK_STATE;
}
#endif
if (hcmd->paddrh == 0) {
- WRITE_REG(adapter->slic_regs->slic_cbar,
- (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_cbar,
+ (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
} else {
- WRITE_REG64(adapter,
- adapter->slic_regs->slic_cbar64,
- (hcmd->paddrl | hcmd->cmdsize),
- adapter->slic_regs->slic_addr_upper,
- hcmd->paddrh, DONT_FLUSH);
+ slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
+ (hcmd->paddrl | hcmd->cmdsize),
+ &adapter->slic_regs->slic_addr_upper,
+ hcmd->paddrh, DONT_FLUSH);
}
xmit_done:
return 0;
void *cmd, u32 skbtype, u32 status)
{
if (adapter->xmitq_full)
- slic_if_stop_queue(adapter);
+ netif_stop_queue(adapter->netdev);
if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
switch (status) {
case XMIT_FAIL_LINK_STATE:
- DBG_ERROR
- ("(%s) reject xmit skb[%p: %x] linkstate[%s] \
- adapter[%s:%d] card[%s:%d]\n",
- adapter->netdev->name, skb, skb->pkt_type,
- SLIC_LINKSTATE(adapter->linkstate),
- SLIC_ADAPTER_STATE(adapter->state), adapter->state,
- SLIC_CARD_STATE(adapter->card->state),
- adapter->card->state);
+ dev_err(&adapter->netdev->dev,
+ "reject xmit skb[%p: %x] linkstate[%s] "
+ "adapter[%s:%d] card[%s:%d]\n",
+ skb, skb->pkt_type,
+ SLIC_LINKSTATE(adapter->linkstate),
+ SLIC_ADAPTER_STATE(adapter->state),
+ adapter->state,
+ SLIC_CARD_STATE(adapter->card->state),
+ adapter->card->state);
break;
case XMIT_FAIL_ZERO_LENGTH:
- DBG_ERROR
- ("xmit_start skb->len == 0 skb[%p] type[%x]!!!! \n",
- skb, skb->pkt_type);
+ dev_err(&adapter->netdev->dev,
+ "xmit_start skb->len == 0 skb[%p] type[%x]\n",
+ skb, skb->pkt_type);
break;
case XMIT_FAIL_HOSTCMD_FAIL:
- DBG_ERROR
- ("xmit_start skb[%p] type[%x] No host commands \
- available !!!! \n",
- skb, skb->pkt_type);
+ dev_err(&adapter->netdev->dev,
+ "xmit_start skb[%p] type[%x] No host commands "
+ "available\n", skb, skb->pkt_type);
break;
default:
ASSERT(0);
if (!slic_mac_filter(adapter, (struct ether_header *)
rcvbuf->data)) {
-#if 0
- DBG_MSG
- ("slicoss: %s (%s) drop frame due to mac filter\n",
- __func__, adapter->netdev->name);
-#endif
slic_rcvqueue_reinsert(adapter, skb);
continue;
}
ASSERT(hcmd);
ASSERT(hcmd->pslic_handle ==
&adapter->slic_handles[slic_handle_word.handle_index]);
-/*
- DBG_ERROR("xmit_complete (%s) hcmd[%p] hosthandle[%x]\n",
- adapter->netdev->name, hcmd, hcmd->cmd64.hosthandle);
- DBG_ERROR(" skb[%p] len %d hcmdtype[%x]\n", hcmd->skb,
- hcmd->skb->len, hcmd->type);
-*/
if (hcmd->type == SLIC_CMD_DUMB) {
if (hcmd->skb)
dev_kfree_skb_irq(hcmd->skb);
u32 isr;
if ((adapter->pshmem) && (adapter->pshmem->isr)) {
- WRITE_REG(adapter->slic_regs->slic_icr, ICR_INT_MASK, FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_icr,
+ ICR_INT_MASK, FLUSH);
isr = adapter->isrcopy = adapter->pshmem->isr;
adapter->pshmem->isr = 0;
adapter->num_isrs++;
if (!count)
break;
}
- DBG_MSG
- ("(%s): [%x] ISR_RMISS \
- initial[%x] pre[%x] \
- errors[%x] \
- post_count[%x]\n",
- adapter->netdev->name,
- isr, rcv_count, pre_count,
- errors, rcvq->count);
} else if (isr & ISR_XDROP) {
- DBG_ERROR
- ("isr & ISR_ERR [%x] \
- ISR_XDROP \n",
- isr);
+ dev_err(&dev->dev,
+ "isr & ISR_ERR [%x] "
+ "ISR_XDROP \n", isr);
} else {
- DBG_ERROR
- ("isr & ISR_ERR [%x]\n",
- isr);
+ dev_err(&dev->dev,
+ "isr & ISR_ERR [%x]\n",
+ isr);
}
}
if (isr & ISR_LEVENT) {
- /*DBG_MSG("%s (%s) ISR_LEVENT \n",
- __func__, adapter->netdev->name);*/
adapter->linkevent_interrupts++;
slic_link_event_handler(adapter);
}
adapter->isrcopy = 0;
adapter->all_reg_writes += 2;
adapter->isr_reg_writes++;
- WRITE_REG(adapter->slic_regs->slic_isr, 0, FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
} else {
adapter->false_interrupts++;
}
pshmem = (struct slic_shmem *)adapter->phys_shmem;
#if defined(CONFIG_X86_64)
-/*
- DBG_MSG("slic_event_handler pshmem->linkstatus[%x] pshmem[%p]\n \
- &linkstatus[%p] &isr[%p]\n", adapter->pshmem->linkstatus, pshmem,
- &pshmem->linkstatus, &pshmem->isr);
-*/
status = slic_upr_request(adapter,
SLIC_UPR_RLSR,
SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
static void slic_init_cleanup(struct adapter *adapter)
{
- DBG_MSG("slicoss: %s ENTER adapter[%p] ", __func__, adapter);
if (adapter->intrregistered) {
- DBG_MSG("FREE_IRQ ");
adapter->intrregistered = 0;
free_irq(adapter->netdev->irq, adapter->netdev);
}
if (adapter->pshmem) {
- DBG_MSG("FREE_SHMEM ");
- DBG_MSG("adapter[%p] port %d pshmem[%p] FreeShmem ",
- adapter, adapter->port, (void *) adapter->pshmem);
pci_free_consistent(adapter->pcidev,
sizeof(struct slic_shmem),
adapter->pshmem, adapter->phys_shmem);
adapter->pshmem = NULL;
adapter->phys_shmem = (dma_addr_t) NULL;
}
-#if SLIC_GET_STATS_TIMER_ENABLED
- if (adapter->statstimerset) {
- DBG_MSG("statstimer ");
- adapter->statstimerset = 0;
- del_timer(&adapter->statstimer);
- }
-#endif
-#if !SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED
-/*#if SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED*/
+
if (adapter->pingtimerset) {
- DBG_MSG("pingtimer ");
adapter->pingtimerset = 0;
del_timer(&adapter->pingtimer);
}
-#endif
+
slic_rspqueue_free(adapter);
slic_cmdq_free(adapter);
slic_rcvqueue_free(adapter);
-
- DBG_MSG("\n");
}
-#if SLIC_GET_STATS_ENABLED
static struct net_device_stats *slic_get_stats(struct net_device *dev)
{
struct adapter *adapter = (struct adapter *)netdev_priv(dev);
stats->rx_length_errors = 0;
return &adapter->stats;
}
-#endif
/*
* Allocate a mcast_address structure to hold the multicast address.
}
/* Doesn't already exist. Allocate a structure to hold it */
- mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
+ mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
if (mcaddr == NULL)
return 1;
mc_list = mc_list->next;
}
- DBG_MSG("%s a->devflags_prev[%x] dev->flags[%x] status[%x]\n",
- __func__, adapter->devflags_prev, dev->flags, status);
if (adapter->devflags_prev != dev->flags) {
adapter->macopts = MAC_DIRECTED;
if (dev->flags) {
adapter->macopts |= MAC_MCAST;
}
adapter->devflags_prev = dev->flags;
- DBG_MSG("%s call slic_config_set adapter->macopts[%x]\n",
- __func__, adapter->macopts);
- slic_config_set(adapter, TRUE);
+ slic_config_set(adapter, true);
} else {
if (status == STATUS_SUCCESS)
slic_mcast_set_mask(adapter);
{
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
- DBG_MSG("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__,
- adapter->netdev->name, (uint) adapter->macopts,
- adapter->mcastmask);
-
if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
/* Turn on all multicast addresses. We have to do this for
* promiscuous mode as well as ALLMCAST mode. It saves the
* Microcode from having to keep state about the MAC
* configuration.
*/
-/* DBG_MSG("slicoss: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n\
- SLUT MODE!!!\n",__func__); */
- WRITE_REG(slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
- WRITE_REG(slic_regs->slic_mcasthigh, 0xFFFFFFFF, FLUSH);
-/* DBG_MSG("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",
- _func__, adapter->netdev->name); */
+ slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
+ slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
+ FLUSH);
} else {
/* Commit our multicast mast to the SLIC by writing to the
* multicast address mask registers
*/
- DBG_MSG("%s (%s) WRITE mcastlow[%x] mcasthigh[%x]\n",
- __func__, adapter->netdev->name,
- ((ulong) (adapter->mcastmask & 0xFFFFFFFF)),
- ((ulong) ((adapter->mcastmask >> 32) & 0xFFFFFFFF)));
-
- WRITE_REG(slic_regs->slic_mcastlow,
- (u32) (adapter->mcastmask & 0xFFFFFFFF), FLUSH);
- WRITE_REG(slic_regs->slic_mcasthigh,
- (u32) ((adapter->mcastmask >> 32) & 0xFFFFFFFF),
- FLUSH);
+ slic_reg32_write(&slic_regs->slic_mcastlow,
+ (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
+ slic_reg32_write(&slic_regs->slic_mcasthigh,
+ (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
}
}
ASSERT(adapter);
card = adapter->card;
ASSERT(card);
-#if !SLIC_DUMP_ENABLED
-/*#if SLIC_DUMP_ENABLED*/
- if ((adapter->state == ADAPT_UP) && (card->state == CARD_UP)) {
- int status;
-
- if (card->pingstatus != ISR_PINGMASK) {
- if (errormsg++ < 5) {
- DBG_MSG
- ("%s (%s) CARD HAS CRASHED PING_status == \
- %x ERRORMSG# %d\n",
- __func__, adapter->netdev->name,
- card->pingstatus, errormsg);
- }
- /* ASSERT(card->pingstatus == ISR_PINGMASK); */
- } else {
- if (goodmsg++ < 5) {
- DBG_MSG
- ("slicoss: %s (%s) PING_status == %x \
- GOOD!!!!!!!! msg# %d\n",
- __func__, adapter->netdev->name,
- card->pingstatus, errormsg);
- }
- }
- card->pingstatus = 0;
- status = slic_upr_request(adapter, SLIC_UPR_PING, 0, 0, 0, 0);
- ASSERT(status == 0);
- } else {
- DBG_MSG("slicoss %s (%s) adapter[%p] NOT UP!!!!\n",
- __func__, adapter->netdev->name, adapter);
- }
-#endif
- adapter->pingtimer.expires =
- jiffies + SLIC_SECS_TO_JIFFS(PING_TIMER_INTERVAL);
+ adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
add_timer(&adapter->pingtimer);
}
-static void slic_if_stop_queue(struct adapter *adapter)
-{
- netif_stop_queue(adapter->netdev);
-}
-
-static void slic_if_start_queue(struct adapter *adapter)
-{
- netif_start_queue(adapter->netdev);
-}
-
/*
* slic_if_init
*
int status = 0;
ASSERT(card);
- DBG_MSG("slicoss: %s (%s) ENTER states[%d:%d:%d:%d] flags[%x]\n",
- __func__, adapter->netdev->name,
- adapter->queues_initialized, adapter->state, adapter->linkstate,
- card->state, dev->flags);
/* adapter should be down at this point */
if (adapter->state != ADAPT_DOWN) {
- DBG_ERROR("slic_if_init adapter->state != ADAPT_DOWN\n");
+ dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
+ __func__);
return -EIO;
}
ASSERT(adapter->linkstate == LINK_DOWN);
adapter->devflags_prev = dev->flags;
adapter->macopts = MAC_DIRECTED;
if (dev->flags) {
- DBG_MSG("slicoss: %s (%s) Set MAC options: ", __func__,
- adapter->netdev->name);
- if (dev->flags & IFF_BROADCAST) {
+ if (dev->flags & IFF_BROADCAST)
adapter->macopts |= MAC_BCAST;
- DBG_MSG("BCAST ");
- }
- if (dev->flags & IFF_PROMISC) {
+ if (dev->flags & IFF_PROMISC)
adapter->macopts |= MAC_PROMISC;
- DBG_MSG("PROMISC ");
- }
- if (dev->flags & IFF_ALLMULTI) {
+ if (dev->flags & IFF_ALLMULTI)
adapter->macopts |= MAC_ALLMCAST;
- DBG_MSG("ALL_MCAST ");
- }
- if (dev->flags & IFF_MULTICAST) {
+ if (dev->flags & IFF_MULTICAST)
adapter->macopts |= MAC_MCAST;
- DBG_MSG("MCAST ");
- }
- DBG_MSG("\n");
}
status = slic_adapter_allocresources(adapter);
if (status != STATUS_SUCCESS) {
- DBG_ERROR
- ("slic_if_init: slic_adapter_allocresources FAILED %x\n",
- status);
+ dev_err(&dev->dev,
+ "%s: slic_adapter_allocresources FAILED %x\n",
+ __func__, status);
slic_adapter_freeresources(adapter);
return status;
}
if (!adapter->queues_initialized) {
- DBG_MSG("slicoss: %s call slic_rspqueue_init\n", __func__);
if (slic_rspqueue_init(adapter))
return -ENOMEM;
- DBG_MSG
- ("slicoss: %s call slic_cmdq_init adapter[%p] port %d \n",
- __func__, adapter, adapter->port);
if (slic_cmdq_init(adapter))
return -ENOMEM;
- DBG_MSG
- ("slicoss: %s call slic_rcvqueue_init adapter[%p] \
- port %d \n", __func__, adapter, adapter->port);
if (slic_rcvqueue_init(adapter))
return -ENOMEM;
adapter->queues_initialized = 1;
}
- DBG_MSG("slicoss: %s disable interrupts(slic)\n", __func__);
- WRITE_REG(slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
mdelay(1);
if (!adapter->isp_initialized) {
adapter->bit64reglock.flags);
#if defined(CONFIG_X86_64)
- WRITE_REG(slic_regs->slic_addr_upper,
- SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
- WRITE_REG(slic_regs->slic_isp,
- SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+ slic_reg32_write(&slic_regs->slic_addr_upper,
+ SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
+ slic_reg32_write(&slic_regs->slic_isp,
+ SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
#elif defined(CONFIG_X86)
- WRITE_REG(slic_regs->slic_addr_upper, (u32) 0, DONT_FLUSH);
- WRITE_REG(slic_regs->slic_isp, (u32) &pshmem->isr, FLUSH);
+ slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+ slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
#else
Stop Compilations
#endif
if (!card->loadtimerset) {
init_timer(&card->loadtimer);
card->loadtimer.expires =
- jiffies + SLIC_SECS_TO_JIFFS(SLIC_LOADTIMER_PERIOD);
+ jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
card->loadtimer.data = (ulong) card;
card->loadtimer.function = &slic_timer_load_check;
add_timer(&card->loadtimer);
card->loadtimerset = 1;
}
-#if SLIC_GET_STATS_TIMER_ENABLED
- if (!adapter->statstimerset) {
- DBG_MSG("slicoss: %s start getstats_timer(slic)\n",
- __func__);
- init_timer(&adapter->statstimer);
- adapter->statstimer.expires =
- jiffies + SLIC_SECS_TO_JIFFS(STATS_TIMER_INTERVAL);
- adapter->statstimer.data = (ulong) adapter->netdev;
- adapter->statstimer.function = &slic_timer_get_stats;
- add_timer(&adapter->statstimer);
- adapter->statstimerset = 1;
- }
-#endif
-#if !SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED
-/*#if SLIC_DUMP_ENABLED && SLIC_PING_TIMER_ENABLED*/
+
if (!adapter->pingtimerset) {
- DBG_MSG("slicoss: %s start card_ping_timer(slic)\n",
- __func__);
init_timer(&adapter->pingtimer);
adapter->pingtimer.expires =
- jiffies + SLIC_SECS_TO_JIFFS(PING_TIMER_INTERVAL);
+ jiffies + (PING_TIMER_INTERVAL * HZ);
adapter->pingtimer.data = (ulong) dev;
adapter->pingtimer.function = &slic_timer_ping;
add_timer(&adapter->pingtimer);
adapter->pingtimerset = 1;
adapter->card->pingstatus = ISR_PINGMASK;
}
-#endif
/*
* clear any pending events, then enable interrupts
*/
- DBG_MSG("slicoss: %s ENABLE interrupts(slic)\n", __func__);
adapter->isrcopy = 0;
adapter->pshmem->isr = 0;
- WRITE_REG(slic_regs->slic_isr, 0, FLUSH);
- WRITE_REG(slic_regs->slic_icr, ICR_INT_ON, FLUSH);
+ slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
+ slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
- DBG_MSG("slicoss: %s call slic_link_config(slic)\n", __func__);
slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
slic_link_event_handler(adapter);
- DBG_MSG("slicoss: %s EXIT\n", __func__);
return STATUS_SUCCESS;
}
static void slic_unmap_mmio_space(struct adapter *adapter)
{
-#if LINUX_FREES_ADAPTER_RESOURCES
if (adapter->slic_regs)
iounmap(adapter->slic_regs);
adapter->slic_regs = NULL;
-#endif
}
static int slic_adapter_allocresources(struct adapter *adapter)
if (!adapter->intrregistered) {
int retval;
- DBG_MSG
- ("slicoss: %s AllocAdaptRsrcs adapter[%p] shmem[%p] \
- phys_shmem[%p] dev->irq[%x] %x\n",
- __func__, adapter, adapter->pshmem,
- (void *)adapter->phys_shmem, adapter->netdev->irq,
- NR_IRQS);
-
spin_unlock_irqrestore(&slic_global.driver_lock.lock,
slic_global.driver_lock.flags);
slic_global.driver_lock.flags);
if (retval) {
- DBG_ERROR("slicoss: request_irq (%s) FAILED [%x]\n",
- adapter->netdev->name, retval);
+ dev_err(&adapter->netdev->dev,
+ "request_irq (%s) FAILED [%x]\n",
+ adapter->netdev->name, retval);
return retval;
}
adapter->intrregistered = 1;
- DBG_MSG
- ("slicoss: %s AllocAdaptRsrcs adapter[%p] shmem[%p] \
- pshmem[%p] dev->irq[%x]\n",
- __func__, adapter, adapter->pshmem,
- (void *)adapter->pshmem, adapter->netdev->irq);
}
return STATUS_SUCCESS;
}
u16 new_command;
pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
- DBG_MSG("slicoss: %s PCI command[%4.4x]\n", __func__, pci_command);
new_command = pci_command | PCI_COMMAND_MASTER
| PCI_COMMAND_MEMORY
| PCI_COMMAND_INVALIDATE
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
- if (pci_command != new_command) {
- DBG_MSG("%s -- Updating PCI COMMAND register %4.4x->%4.4x.\n",
- __func__, pci_command, new_command);
+ if (pci_command != new_command)
pci_write_config_word(pcidev, PCI_COMMAND, new_command);
- }
}
static void slic_adapter_freeresources(struct adapter *adapter)
{
- DBG_MSG("slicoss: %s ENTER adapter[%p]\n", __func__, adapter);
slic_init_cleanup(adapter);
memset(&adapter->stats, 0, sizeof(struct net_device_stats));
adapter->error_interrupts = 0;
adapter->rcv_broadcasts = 0;
adapter->rcv_multicasts = 0;
adapter->rcv_unicasts = 0;
- DBG_MSG("slicoss: %s EXIT\n", __func__);
}
/*
static void slic_link_config(struct adapter *adapter,
u32 linkspeed, u32 linkduplex)
{
+ u32 __iomem *wphy;
u32 speed;
u32 duplex;
u32 phy_config;
u32 phy_advreg;
u32 phy_gctlreg;
- if (adapter->state != ADAPT_UP) {
- DBG_MSG
- ("%s (%s) ADAPT Not up yet, Return! speed[%x] duplex[%x]\n",
- __func__, adapter->netdev->name, linkspeed,
- linkduplex);
+ if (adapter->state != ADAPT_UP)
return;
- }
- DBG_MSG("slicoss: %s (%s) slic_link_config: speed[%x] duplex[%x]\n",
- __func__, adapter->netdev->name, linkspeed, linkduplex);
ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
|| (adapter->devid == SLIC_2GB_DEVICE_ID));
if (linkduplex > LINK_AUTOD)
linkduplex = LINK_AUTOD;
+ wphy = &adapter->slic_regs->slic_wphy;
+
if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
/* We've got a fiber gigabit interface, and register
phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
/* enable PAUSE frames */
phy_advreg |= PAR_ASYMPAUSE_FIBER;
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_advreg,
- FLUSH);
+ slic_reg32_write(wphy, phy_advreg, FLUSH);
if (linkspeed == LINK_AUTOSPEED) {
/* reset phy, enable auto-neg */
(MIICR_REG_PCR |
(PCR_RESET | PCR_AUTONEG |
PCR_AUTONEG_RST));
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
} else { /* forced 1000 Mb FD*/
/* power down phy to break link
this may not work) */
phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
/* wait, Marvell says 1 sec,
try to get away with 10 ms */
mdelay(10);
(MIICR_REG_PCR |
(PCR_RESET | PCR_SPEED_1000 |
PCR_DUPLEX_FULL));
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
}
} else { /* copper gigabit */
phy_advreg |= PAR_ASYMPAUSE;
/* required by the Cicada PHY */
phy_advreg |= PAR_802_3;
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_advreg,
- FLUSH);
+ slic_reg32_write(wphy, phy_advreg, FLUSH);
/* advertise FD only @1000 Mb */
phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_gctlreg,
- FLUSH);
+ slic_reg32_write(wphy, phy_gctlreg, FLUSH);
if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
/* if a Marvell PHY
enable auto crossover */
phy_config =
(MIICR_REG_16 | (MRV_REG16_XOVERON));
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
/* reset phy, enable auto-neg */
phy_config =
(MIICR_REG_PCR |
(PCR_RESET | PCR_AUTONEG |
PCR_AUTONEG_RST));
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
} else { /* it's a Cicada PHY */
/* enable and restart auto-neg (don't reset) */
phy_config =
(MIICR_REG_PCR |
(PCR_AUTONEG | PCR_AUTONEG_RST));
- WRITE_REG(adapter->slic_regs->slic_wphy,
- phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
}
}
} else {
/* if a Marvell PHY
disable auto crossover */
phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_config,
- FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
}
/* power down phy to break link (this may not work) */
phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_config, FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
/* wait, Marvell says 1 sec, try to get away with 10 ms */
mdelay(10);
soft reset phy, powerup */
phy_config =
(MIICR_REG_PCR | (PCR_RESET | speed | duplex));
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_config,
- FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
} else { /* it's a Cicada PHY */
/* disable auto-neg, set speed, powerup */
phy_config = (MIICR_REG_PCR | (speed | duplex));
- WRITE_REG(adapter->slic_regs->slic_wphy, phy_config,
- FLUSH);
+ slic_reg32_write(wphy, phy_config, FLUSH);
}
}
-
- DBG_MSG
- ("slicoss: %s (%s) EXIT slic_link_config : state[%d] \
- phy_config[%x]\n", __func__, adapter->netdev->name, adapter->state,
- phy_config);
}
static void slic_card_cleanup(struct sliccard *card)
{
- DBG_MSG("slicoss: %s ENTER\n", __func__);
-
-#if SLIC_DUMP_ENABLED
- if (card->dumpbuffer) {
- card->dumpbuffer_phys = 0;
- card->dumpbuffer_physl = 0;
- card->dumpbuffer_physh = 0;
- kfree(card->dumpbuffer);
- card->dumpbuffer = NULL;
- }
- if (card->cmdbuffer) {
- card->cmdbuffer_phys = 0;
- card->cmdbuffer_physl = 0;
- card->cmdbuffer_physh = 0;
- kfree(card->cmdbuffer);
- card->cmdbuffer = NULL;
- }
-#endif
-
if (card->loadtimerset) {
card->loadtimerset = 0;
del_timer(&card->loadtimer);
slic_debug_card_destroy(card);
kfree(card);
- DBG_MSG("slicoss: %s EXIT\n", __func__);
}
static int slic_card_download_gbrcv(struct adapter *adapter)
int ret;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 codeaddr;
- unsigned char *instruction = NULL;
+ u32 instruction;
+ int index = 0;
u32 rcvucodelen = 0;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
- file = "oasis_rcv.bin";
+ file = "slicoss/oasisrcvucode.sys";
break;
case SLIC_1GB_DEVICE_ID:
- file = "gb_rcv.bin";
+ file = "slicoss/gbrcvucode.sys";
break;
default:
ASSERT(0);
ret = request_firmware(&fw, file, &adapter->pcidev->dev);
if (ret) {
- printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ dev_err(&adapter->pcidev->dev,
+ "SLICOSS: Failed to load firmware %s\n", file);
return ret;
}
- instruction = (unsigned char *)fw->data;
- rcvucodelen = fw->size;
+ rcvucodelen = *(u32 *)(fw->data + index);
+ index += 4;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
if (rcvucodelen != OasisRcvUCodeLen)
ASSERT(0);
break;
}
-
/* start download */
- WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
-
+ slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
/* download the rcv sequencer ucode */
for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
/* write out instruction address */
- WRITE_REG(slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
+ slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* write out the instruction data low addr */
- WRITE_REG(slic_regs->slic_rcv_wcs,
- (u32) *(u32 *) instruction, FLUSH);
- instruction += 4;
+ slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
+ instruction = *(u8 *)(fw->data + index);
+ index++;
/* write out the instruction data high addr */
- WRITE_REG(slic_regs->slic_rcv_wcs, (u32) *instruction,
- FLUSH);
- instruction += 1;
+ slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
+ FLUSH);
}
/* download finished */
release_firmware(fw);
- WRITE_REG(slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
+ slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
return 0;
}
int thissectionsize;
int codeaddr;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
- u32 *instruction = NULL;
- u32 *lastinstruct = NULL;
- u32 *startinstruct = NULL;
- unsigned char *nextinstruct;
+ u32 instruction;
u32 baseaddress;
u32 failure;
u32 i;
u32 numsects = 0;
u32 sectsize[3];
u32 sectstart[3];
-
-/* DBG_MSG ("slicoss: %s (%s) adapter[%p] card[%p] devid[%x] \
- jiffies[%lx] cpu %d\n", __func__, adapter->netdev->name, adapter,
- adapter->card, adapter->devid,jiffies, smp_processor_id()); */
+ int ucode_start, index = 0;
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_2GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) ONumSections); */
- file = "slic_oasis.bin";
- numsects = ONumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = OSectionSize[i];
- sectstart[i] = OSectionStart[i];
- }
+ file = "slicoss/oasisdownload.sys";
break;
case SLIC_1GB_DEVICE_ID:
-/* DBG_MSG ("slicoss: %s devid==SLIC_1GB_DEVICE_ID sections[%x]\n",
- __func__, (uint) MNumSections); */
- file = "slic_mojave.bin";
- numsects = MNumSections;
- for (i = 0; i < numsects; i++) {
- sectsize[i] = MSectionSize[i];
- sectstart[i] = MSectionStart[i];
- }
+ file = "slicoss/gbdownload.sys";
break;
default:
ASSERT(0);
}
ret = request_firmware(&fw, file, &adapter->pcidev->dev);
if (ret) {
- printk(KERN_ERR "SLICOSS: Failed to load firmware %s\n", file);
+ dev_err(&adapter->pcidev->dev,
+ "SLICOSS: Failed to load firmware %s\n", file);
return ret;
}
-
+ numsects = *(u32 *)(fw->data + index);
+ index += 4;
ASSERT(numsects <= 3);
-
+ for (i = 0; i < numsects; i++) {
+ sectsize[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ for (i = 0; i < numsects; i++) {
+ sectstart[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ ucode_start = index;
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)(fw->data + (SECTION_SIZE *
- section));
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *)(fw->data + (SECTION_SIZE * section) +
- sectsize[section] - 8);
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)(fw->data + (SECTION_SIZE *
- section));
- baseaddress = sectstart[section];
- thissectionsize = sectsize[section] >> 3;
- lastinstruct =
- (u32 *)(fw->data + (SECTION_SIZE * section) +
- sectsize[section] - 8);
- break;
- default:
- ASSERT(0);
- break;
- }
-
baseaddress = sectstart[section];
thissectionsize = sectsize[section] >> 3;
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
- startinstruct = instruction;
- nextinstruct = ((unsigned char *)instruction) + 8;
/* Write out instruction address */
- WRITE_REG(slic_regs->slic_wcs, baseaddress + codeaddr,
- FLUSH);
+ slic_reg32_write(&slic_regs->slic_wcs,
+ baseaddress + codeaddr, FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
}
}
-
+ index = ucode_start;
for (section = 0; section < numsects; section++) {
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- instruction = (u32 *)fw->data + (SECTION_SIZE *
- section);
- break;
- case SLIC_1GB_DEVICE_ID:
- instruction = (u32 *)fw->data + (SECTION_SIZE *
- section);
- break;
- default:
- ASSERT(0);
- break;
- }
-
+ instruction = *(u32 *)(fw->data + index);
baseaddress = sectstart[section];
if (baseaddress < 0x8000)
continue;
thissectionsize = sectsize[section] >> 3;
-/* DBG_MSG ("slicoss: COMPARE secton[%x] baseaddr[%x] sectnsize[%x]\n",
- (uint)section,baseaddress,thissectionsize);*/
-
for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
/* Write out instruction address */
- WRITE_REG(slic_regs->slic_wcs,
- SLIC_WCS_COMPARE | (baseaddress + codeaddr),
- FLUSH);
+ slic_reg32_write(&slic_regs->slic_wcs,
+ SLIC_WCS_COMPARE | (baseaddress + codeaddr),
+ FLUSH);
/* Write out instruction to low addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ slic_reg32_write(&slic_regs->slic_wcs, instruction,
+ FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
/* Write out instruction to high addr */
- WRITE_REG(slic_regs->slic_wcs, *instruction, FLUSH);
-#ifdef CONFIG_X86_64
- instruction = (u32 *)((unsigned char *)instruction + 4);
-#else
- instruction++;
-#endif
+ slic_reg32_write(&slic_regs->slic_wcs, instruction,
+ FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+
/* Check SRAM location zero. If it is non-zero. Abort.*/
- failure = readl((u32 __iomem *)&slic_regs->slic_reset);
+/* failure = readl((u32 __iomem *)&slic_regs->slic_reset);
if (failure) {
- DBG_MSG
- ("slicoss: %s FAILURE EXIT codeaddr[%x] \
- thissectionsize[%x] failure[%x]\n",
- __func__, codeaddr, thissectionsize,
- failure);
release_firmware(fw);
return -EIO;
- }
+ }*/
}
}
-/* DBG_MSG ("slicoss: Compare done\n");*/
release_firmware(fw);
/* Everything OK, kick off the card */
mdelay(10);
- WRITE_REG(slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
/* stall for 20 ms, long enough for ucode to init card
and reach mainloop */
mdelay(20);
- DBG_MSG("slicoss: %s (%s) EXIT adapter[%p] card[%p]\n",
- __func__, adapter->netdev->name, adapter, adapter->card);
-
return STATUS_SUCCESS;
}
{
struct sliccard *card = adapter->card;
-/* DBG_MSG ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n",
- __func__, card->config_set, adapter->port, adapter->physport,
- adapter->functionnumber);
-
- slic_dbg_macaddrs(adapter); */
-
if ((adapter->card) && (card->config_set)) {
memcpy(adapter->macaddr,
card->config.MacInfo[adapter->functionnumber].macaddrA,
sizeof(struct slic_config_mac));
-/* DBG_MSG ("%s AFTER copying from config.macinfo into currmacaddr\n",
- __func__);
- slic_dbg_macaddrs(adapter);*/
if (!(adapter->currmacaddr[0] || adapter->currmacaddr[1] ||
adapter->currmacaddr[2] || adapter->currmacaddr[3] ||
adapter->currmacaddr[4] || adapter->currmacaddr[5])) {
6);
}
}
-/* DBG_MSG ("%s EXIT port %d\n", __func__, adapter->port);
- slic_dbg_macaddrs(adapter); */
}
static void slic_intagg_set(struct adapter *adapter, u32 value)
{
- __iomem struct slic_regs *slic_regs = adapter->slic_regs;
-
- WRITE_REG(slic_regs->slic_intagg, value, FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
adapter->card->loadlevel_current = value;
}
struct atk_fru *patkfru;
union oemfru *poemfru;
- DBG_MSG
- ("slicoss: %s ENTER card[%p] adapter[%p] card->state[%x] \
- size[%d]\n", __func__, card, adapter, card->state, card->card_size);
-
/* Reset everything except PCI configuration space */
slic_soft_reset(adapter);
status = slic_card_download(adapter);
if (status != STATUS_SUCCESS) {
- DBG_ERROR("SLIC download failed bus %d slot %d\n",
- (uint) adapter->busnumber,
- (uint) adapter->slotnumber);
+ dev_err(&adapter->pcidev->dev,
+ "download failed bus %d slot %d\n",
+ adapter->busnumber, adapter->slotnumber);
return status;
}
phys_configl = SLIC_GET_ADDR_LOW(phys_config);
phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
- DBG_MSG("slicoss: %s Eeprom info adapter [%p]\n "
- "size [%x]\n peeprom [%p]\n "
- "phys_config [%p]\n phys_configl[%x]\n "
- "phys_configh[%x]\n",
- __func__, adapter,
- (u32)sizeof(struct slic_eeprom),
- peeprom, (void *) phys_config, phys_configl,
- phys_configh);
if (!peeprom) {
- DBG_ERROR
- ("SLIC eeprom read failed to get memory bus %d \
- slot %d\n",
- (uint) adapter->busnumber,
- (uint) adapter->slotnumber);
+ dev_err(&adapter->pcidev->dev,
+ "eeprom read failed to get memory "
+ "bus %d slot %d\n", adapter->busnumber,
+ adapter->slotnumber);
return -ENOMEM;
} else {
memset(peeprom, 0, sizeof(struct slic_eeprom));
}
- WRITE_REG(slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+ slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
mdelay(1);
pshmem = (struct slic_shmem *)adapter->phys_shmem;
spin_lock_irqsave(&adapter->bit64reglock.lock,
adapter->bit64reglock.flags);
- WRITE_REG(slic_regs->slic_addr_upper, 0, DONT_FLUSH);
- WRITE_REG(slic_regs->slic_isp,
- SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+ slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+ slic_reg32_write(&slic_regs->slic_isp,
+ SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
spin_unlock_irqrestore(&adapter->bit64reglock.lock,
adapter->bit64reglock.flags);
for (;;) {
if (adapter->pshmem->isr) {
- DBG_MSG("%s shmem[%p] shmem->isr[%x]\n",
- __func__, adapter->pshmem,
- adapter->pshmem->isr);
-
if (adapter->pshmem->isr & ISR_UPC) {
adapter->pshmem->isr = 0;
- WRITE_REG64(adapter,
- slic_regs->slic_isp,
- 0,
- slic_regs->slic_addr_upper,
- 0, FLUSH);
- WRITE_REG(slic_regs->slic_isr, 0,
- FLUSH);
+ slic_reg64_write(adapter,
+ &slic_regs->slic_isp, 0,
+ &slic_regs->slic_addr_upper,
+ 0, FLUSH);
+ slic_reg32_write(&slic_regs->slic_isr,
+ 0, FLUSH);
slic_upr_request_complete(adapter, 0);
break;
} else {
adapter->pshmem->isr = 0;
- WRITE_REG(slic_regs->slic_isr, 0,
- FLUSH);
+ slic_reg32_write(&slic_regs->slic_isr,
+ 0, FLUSH);
}
} else {
mdelay(1);
i++;
if (i > 5000) {
- DBG_ERROR
- ("SLIC: %d config data fetch timed\
- out!\n", adapter->port);
- DBG_MSG("%s shmem[%p] shmem->isr[%x]\n",
- __func__, adapter->pshmem,
- adapter->pshmem->isr);
- WRITE_REG64(adapter,
- slic_regs->slic_isp, 0,
- slic_regs->slic_addr_upper,
- 0, FLUSH);
+ dev_err(&adapter->pcidev->dev,
+ "%d config data fetch timed out!\n",
+ adapter->port);
+ slic_reg64_write(adapter,
+ &slic_regs->slic_isp, 0,
+ &slic_regs->slic_addr_upper,
+ 0, FLUSH);
return -EINVAL;
}
}
break;
}
- card->config.EepromValid = FALSE;
+ card->config.EepromValid = false;
/* see if the EEPROM is valid by checking it's checksum */
if ((eecodesize <= MAX_EECODE_SIZE) &&
we wouldn't need this shit
*/
if (ee_chksum == calc_chksum)
- card->config.EepromValid = TRUE;
+ card->config.EepromValid = true;
}
/* copy in the DRAM size */
card->config.DramSize = dramsize;
memcpy(&card->config.MacInfo[i],
&pmac[i], sizeof(struct slic_config_mac));
}
-/* DBG_MSG ("%s EEPROM Checksum Good? %d MacAddress\n",__func__,
- card->config.EepromValid); */
/* copy the Alacritech FRU information */
card->config.FruFormat = fruformat;
pci_free_consistent(adapter->pcidev,
sizeof(struct slic_eeprom),
peeprom, phys_config);
- DBG_MSG
- ("slicoss: %s adapter%d [%p] size[%x] FREE peeprom[%p] \
- phys_config[%p]\n",
- __func__, adapter->port, adapter,
- (u32) sizeof(struct slic_eeprom), peeprom,
- (void *) phys_config);
if ((!card->config.EepromValid) &&
(adapter->reg_params.fail_on_bad_eeprom)) {
- WRITE_REG64(adapter,
- slic_regs->slic_isp,
- 0, slic_regs->slic_addr_upper, 0, FLUSH);
- DBG_ERROR
- ("unsupported CONFIGURATION EEPROM invalid\n");
+ slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
+ &slic_regs->slic_addr_upper,
+ 0, FLUSH);
+ dev_err(&adapter->pcidev->dev,
+ "unsupported CONFIGURATION EEPROM invalid\n");
return -EINVAL;
}
}
if (slic_card_download_gbrcv(adapter)) {
- DBG_ERROR("%s unable to download GB receive microcode\n",
- __func__);
+ dev_err(&adapter->pcidev->dev,
+ "unable to download GB receive microcode\n");
return -EINVAL;
}
- if (slic_global.dynamic_intagg) {
- DBG_MSG
- ("Dynamic Interrupt Aggregation[ENABLED]: slic%d \
- SET intagg to %d\n",
- card->cardnum, 0);
+ if (slic_global.dynamic_intagg)
slic_intagg_set(adapter, 0);
- } else {
+ else
slic_intagg_set(adapter, intagg_delay);
- DBG_MSG
- ("Dynamic Interrupt Aggregation[DISABLED]: slic%d \
- SET intagg to %d\n",
- card->cardnum, intagg_delay);
- }
/*
* Initialize ping status to "ok"
*/
card->pingstatus = ISR_PINGMASK;
-#if SLIC_DUMP_ENABLED
- if (!card->dumpbuffer) {
- card->dumpbuffer = kmalloc(DUMP_PAGE_SIZE, GFP_ATOMIC);
-
- ASSERT(card->dumpbuffer);
- if (card->dumpbuffer == NULL)
- return -ENOMEM;
- }
- /*
- * Smear the shared memory structure and then obtain
- * the PHYSICAL address of this structure
- */
- memset(card->dumpbuffer, 0, DUMP_PAGE_SIZE);
- card->dumpbuffer_phys = virt_to_bus(card->dumpbuffer);
- card->dumpbuffer_physh = SLIC_GET_ADDR_HIGH(card->dumpbuffer_phys);
- card->dumpbuffer_physl = SLIC_GET_ADDR_LOW(card->dumpbuffer_phys);
-
- /*
- * Allocate COMMAND BUFFER
- */
- if (!card->cmdbuffer) {
- card->cmdbuffer = kmalloc(sizeof(struct dump_cmd), GFP_ATOMIC);
-
- ASSERT(card->cmdbuffer);
- if (card->cmdbuffer == NULL)
- return -ENOMEM;
- }
- /*
- * Smear the shared memory structure and then obtain
- * the PHYSICAL address of this structure
- */
- memset(card->cmdbuffer, 0, sizeof(struct dump_cmd));
- card->cmdbuffer_phys = virt_to_bus(card->cmdbuffer);
- card->cmdbuffer_physh = SLIC_GET_ADDR_HIGH(card->cmdbuffer_phys);
- card->cmdbuffer_physl = SLIC_GET_ADDR_LOW(card->cmdbuffer_phys);
-#endif
-
/*
* Lastly, mark our card state as up and return success
*/
card->state = CARD_UP;
card->reset_in_progress = 0;
- DBG_MSG("slicoss: %s EXIT card[%p] adapter[%p] card->state[%x]\n",
- __func__, card, adapter, card->state);
return STATUS_SUCCESS;
}
uint i;
uint rdhostid_offset = 0;
- DBG_MSG("slicoss: %s adapter[%p] slot[%x] bus[%x] port[%x]\n",
- __func__, adapter, adapter->slotnumber, adapter->busnumber,
- adapter->port);
-
switch (adapter->devid) {
case SLIC_2GB_DEVICE_ID:
rdhostid_offset = SLIC_RDHOSTID_2GB;
hostid_reg =
(u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
rdhostid_offset);
- DBG_MSG("slicoss: %s *hostid_reg[%p] == ", __func__, hostid_reg);
/* read the 16 bit hostid from SRAM */
card_hostid = (ushort) readw(hostid_reg);
- DBG_MSG(" card_hostid[%x]\n", card_hostid);
/* Initialize a new card structure if need be */
if (card_hostid == SLIC_HOSTID_DEFAULT) {
card->next = slic_global.slic_card;
slic_global.slic_card = card;
-#if DBG
- if (adapter->devid == SLIC_2GB_DEVICE_ID) {
- DBG_MSG
- ("SLICOSS ==> Initialize 2 Port Gigabit Server \
- and Storage Accelerator\n");
- } else {
- DBG_MSG
- ("SLICOSS ==> Initialize 1 Port Gigabit Server \
- and Storage Accelerator\n");
- }
-#endif
card->busnumber = adapter->busnumber;
card->slotnumber = adapter->slotnumber;
}
}
slic_global.num_slic_cards++;
- DBG_MSG("\nCARDNUM == %d Total %d Card[%p]\n\n",
- card->cardnum, slic_global.num_slic_cards, card);
slic_debug_card_create(card);
} else {
- DBG_MSG
- ("slicoss: %s CARD already allocated, find the \
- correct card\n", __func__);
/* Card exists, find the card this adapter belongs to */
while (card) {
- DBG_MSG
- ("slicoss: %s card[%p] slot[%x] bus[%x] \
- adaptport[%p] hostid[%x] cardnum[%x]\n",
- __func__, card, card->slotnumber,
- card->busnumber, card->adapter[adapter->port],
- card_hostid, card->cardnum);
-
if (card->cardnum == card_hostid)
break;
card = card->next;
}
if (!physcard) {
/* no structure allocated for this physical card yet */
- physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
+ physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
ASSERT(physcard);
- DBG_MSG
- ("\n%s Allocate a PHYSICALcard:\n PHYSICAL_Card[%p]\n\
- LogicalCard [%p]\n adapter [%p]\n",
- __func__, physcard, card, adapter);
-
physcard->next = slic_global.phys_card;
slic_global.phys_card = physcard;
physcard->adapters_allocd = 1;
ASSERT(physcard->adapter[adapter->physport] == NULL);
physcard->adapter[adapter->physport] = adapter;
adapter->physcard = physcard;
- DBG_MSG(" PHYSICAL_Port %d Logical_Port %d\n", adapter->physport,
- adapter->port);
return 0;
}
static void slic_soft_reset(struct adapter *adapter)
{
if (adapter->card->state == CARD_UP) {
- DBG_MSG("slicoss: %s QUIESCE adapter[%p] card[%p] devid[%x]\n",
- __func__, adapter, adapter->card, adapter->devid);
- WRITE_REG(adapter->slic_regs->slic_quiesce, 0, FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
mdelay(1);
}
-/* DBG_MSG ("slicoss: %s (%s) adapter[%p] card[%p] devid[%x]\n",
- __func__, adapter->netdev->name, adapter, adapter->card,
- adapter->devid); */
- WRITE_REG(adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC, FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
+ FLUSH);
mdelay(1);
}
u32 RcrReset;
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
- DBG_MSG("slicoss: %s (%s) slic_interface_enable[%p](%d)\n",
- __func__, adapter->netdev->name, adapter,
- adapter->cardindex);
-
if (linkchange) {
/* Setup MAC */
slic_mac_config(adapter);
GXCR_XMTEN | /* Enable transmit */
GXCR_PAUSEEN); /* Enable pause */
- DBG_MSG("slicoss: FDX adapt[%p] set xmtcfg to [%x]\n", adapter,
- value);
- WRITE_REG(slic_regs->slic_wxcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
/* Setup rcvcfg last */
value = (RcrReset | /* Reset, if linkchange */
value = (GXCR_RESET | /* Always reset */
GXCR_XMTEN); /* Enable transmit */
- DBG_MSG("slicoss: HDX adapt[%p] set xmtcfg to [%x]\n", adapter,
- value);
- WRITE_REG(slic_regs->slic_wxcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
/* Setup rcvcfg last */
value = (RcrReset | /* Reset, if linkchange */
if (adapter->macopts & MAC_PROMISC)
value |= GRCR_RCVALL;
- DBG_MSG("slicoss: adapt[%p] set rcvcfg to [%x]\n", adapter, value);
- WRITE_REG(slic_regs->slic_wrcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
}
/*
value = (GXCR_RESET | /* Always reset */
GXCR_PAUSEEN); /* Enable pause */
- WRITE_REG(slic_regs->slic_wxcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
value = (GRCR_RESET | /* Always reset */
GRCR_CTLEN | /* Enable CTL frames */
GRCR_ADDRAEN | /* Address A enable */
(GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
- WRITE_REG(slic_regs->slic_wrcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
/* power down phy */
phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
- WRITE_REG(slic_regs->slic_wphy, phy_config, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
}
static void slic_config_get(struct adapter *adapter, u32 config,
value = *(u32 *) &adapter->currmacaddr[2];
value = ntohl(value);
- WRITE_REG(slic_regs->slic_wraddral, value, FLUSH);
- WRITE_REG(slic_regs->slic_wraddrbl, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
value2 = (u32) ((adapter->currmacaddr[0] << 8 |
adapter->currmacaddr[1]) & 0xFFFF);
- WRITE_REG(slic_regs->slic_wraddrah, value2, FLUSH);
- WRITE_REG(slic_regs->slic_wraddrbh, value2, FLUSH);
-
- DBG_MSG("%s value1[%x] value2[%x] Call slic_mcast_set_mask\n",
- __func__, value, value2);
- slic_dbg_macaddrs(adapter);
+ slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
/* Write our multicast mask out to the card. This is done */
/* here in addition to the slic_mcast_addr_set routine */
}
/* write mac config */
- WRITE_REG(slic_regs->slic_wmcfg, value, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
/* setup mac addresses */
slic_mac_address_config(adapter);
u16 *dhost2 = (u16 *)ðer_frame->ether_dhost[4];
bool equaladdr;
- if (opts & MAC_PROMISC) {
- DBG_MSG("slicoss: %s (%s) PROMISCUOUS. Accept frame\n",
- __func__, adapter->netdev->name);
- return TRUE;
- }
+ if (opts & MAC_PROMISC)
+ return true;
if ((*dhost4 == 0xFFFFFFFF) && (*dhost2 == 0xFFFF)) {
if (opts & MAC_BCAST) {
adapter->rcv_broadcasts++;
- return TRUE;
+ return true;
} else {
- return FALSE;
+ return false;
}
}
if (opts & MAC_ALLMCAST) {
adapter->rcv_multicasts++;
adapter->stats.multicast++;
- return TRUE;
+ return true;
}
if (opts & MAC_MCAST) {
struct mcast_address *mcaddr = adapter->mcastaddrs;
if (equaladdr) {
adapter->rcv_multicasts++;
adapter->stats.multicast++;
- return TRUE;
+ return true;
}
mcaddr = mcaddr->next;
}
- return FALSE;
+ return false;
} else {
- return FALSE;
+ return false;
}
}
if (opts & MAC_DIRECTED) {
adapter->rcv_unicasts++;
- return TRUE;
+ return true;
}
- return FALSE;
+ return false;
}
struct adapter *adapter = (struct adapter *)netdev_priv(dev);
struct sockaddr *addr = ptr;
- DBG_MSG("%s ENTER (%s)\n", __func__, adapter->netdev->name);
-
if (netif_running(dev))
return -EBUSY;
if (!adapter)
return -EBUSY;
- DBG_MSG("slicoss: %s (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- __func__, adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
+
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
- DBG_MSG("slicoss: %s (%s) new %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- __func__, adapter->netdev->name, adapter->currmacaddr[0],
- adapter->currmacaddr[1], adapter->currmacaddr[2],
- adapter->currmacaddr[3], adapter->currmacaddr[4],
- adapter->currmacaddr[5]);
- slic_config_set(adapter, TRUE);
+ slic_config_set(adapter, true);
return 0;
}
-/*
- * slic_timer_get_stats
- *
- * Timer function used to suck the statistics out of the card every
- * 50 seconds or whatever STATS_TIMER_INTERVAL is set to.
- *
- */
-#if SLIC_GET_STATS_TIMER_ENABLED
-static void slic_timer_get_stats(ulong dev)
-{
- struct adapter *adapter;
- struct sliccard *card;
- struct slic_shmem *pshmem;
-
- ASSERT(dev);
- adapter = netdev_priv((struct net_device *)dev);
- ASSERT(adapter);
- card = adapter->card;
- ASSERT(card);
-
- if ((card->state == CARD_UP) &&
- (adapter->state == ADAPT_UP) && (adapter->linkstate == LINK_UP)) {
- pshmem = (struct slic_shmem *)adapter->phys_shmem;
-#ifdef CONFIG_X86_64
- slic_upr_request(adapter,
- SLIC_UPR_STATS,
- SLIC_GET_ADDR_LOW(&pshmem->inicstats),
- SLIC_GET_ADDR_HIGH(&pshmem->inicstats), 0, 0);
-#elif defined(CONFIG_X86)
- slic_upr_request(adapter,
- SLIC_UPR_STATS,
- (u32) &pshmem->inicstats, 0, 0, 0);
-#else
- Stop compilation;
-#endif
- } else {
-/* DBG_MSG ("slicoss: %s adapter[%p] linkstate[%x] NOT UP!\n",
- __func__, adapter, adapter->linkstate); */
- }
- adapter->statstimer.expires = jiffies +
- SLIC_SECS_TO_JIFFS(STATS_TIMER_INTERVAL);
- add_timer(&adapter->statstimer);
-}
-#endif
static void slic_timer_load_check(ulong cardaddr)
{
struct sliccard *card = (struct sliccard *)cardaddr;
struct adapter *adapter = card->master;
+ u32 __iomem *intagg;
u32 load = card->events;
u32 level = 0;
+ intagg = &adapter->slic_regs->slic_intagg;
+
if ((adapter) && (adapter->state == ADAPT_UP) &&
(card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
if (adapter->devid == SLIC_1GB_DEVICE_ID) {
}
if (card->loadlevel_current != level) {
card->loadlevel_current = level;
- WRITE_REG(adapter->slic_regs->slic_intagg,
- level, FLUSH);
+ slic_reg32_write(intagg, level, FLUSH);
}
} else {
if (load > SLIC_LOAD_5)
level = SLIC_INTAGG_0;
if (card->loadlevel_current != level) {
card->loadlevel_current = level;
- WRITE_REG(adapter->slic_regs->slic_intagg,
- level, FLUSH);
+ slic_reg32_write(intagg, level, FLUSH);
}
}
}
card->events = 0;
- card->loadtimer.expires =
- jiffies + SLIC_SECS_TO_JIFFS(SLIC_LOADTIMER_PERIOD);
+ card->loadtimer.expires = jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
add_timer(&card->loadtimer);
}
cpuid = smp_processor_id();
curr_pid = current->pid;
- DBG_ERROR("%s CPU # %d ---- PID # %d\n", __func__, cpuid, curr_pid);
+ printk(KERN_ERR "%s CPU # %d ---- PID # %d\n",
+ __func__, cpuid, curr_pid);
}
static int slic_upr_queue_request(struct adapter *adapter,
struct slic_upr *uprqueue;
upr = kmalloc(sizeof(struct slic_upr), GFP_ATOMIC);
- if (!upr) {
- DBG_MSG("%s COULD NOT ALLOCATE UPR MEM\n", __func__);
-
+ if (!upr)
return -ENOMEM;
- }
+
upr->adapter = adapter->port;
upr->upr_request = upr_request;
upr->upr_data = upr_data;
struct sliccard *card = adapter->card;
struct slic_upr *upr;
-/* if (card->dump_requested) {
- DBG_MSG("ENTER slic_upr_request_complete Dump in progress ISR[%x]\n",
- isr);
- } */
spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
upr = adapter->upr_list;
if (!upr) {
switch (upr->upr_request) {
case SLIC_UPR_STATS:
{
-#if SLIC_GET_STATS_ENABLED
struct slic_stats *slicstats =
(struct slic_stats *) &adapter->pshmem->inicstats;
struct slic_stats *newstats = slicstats;
struct slic_stats *old = &adapter->inicstats_prev;
struct slicnet_stats *stst = &adapter->slic_stats;
-#endif
+
if (isr & ISR_UPCERR) {
- DBG_ERROR
- ("SLIC_UPR_STATS command failed isr[%x]\n",
- isr);
+ dev_err(&adapter->netdev->dev,
+ "SLIC_UPR_STATS command failed isr[%x]\n",
+ isr);
break;
}
-#if SLIC_GET_STATS_ENABLED
-/* DBG_MSG ("slicoss: %s rcv %lx:%lx:%lx:%lx:%lx %lx %lx "
- "xmt %lx:%lx:%lx:%lx:%lx %lx %lx\n",
- __func__,
- slicstats->rcv_unicasts100,
- slicstats->rcv_bytes100,
- slicstats->rcv_bytes100,
- slicstats->rcv_tcp_bytes100,
- slicstats->rcv_tcp_segs100,
- slicstats->rcv_other_error100,
- slicstats->rcv_drops100,
- slicstats->xmit_unicasts100,
- slicstats->xmit_bytes100,
- slicstats->xmit_bytes100,
- slicstats->xmit_tcp_bytes100,
- slicstats->xmit_tcp_segs100,
- slicstats->xmit_other_error100,
- slicstats->xmit_collisions100);*/
UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs,
newstats->xmit_tcp_segs_gb,
old->xmit_tcp_segs_gb);
old->rcv_drops_gb);
}
memcpy(old, newstats, sizeof(struct slic_stats));
-#endif
break;
}
case SLIC_UPR_RLSR:
case SLIC_UPR_PING:
card->pingstatus |= (isr & ISR_PINGDSMASK);
break;
-#if SLIC_DUMP_ENABLED
- case SLIC_UPR_DUMP:
- card->dumpstatus |= (isr & ISR_UPCMASK);
- break;
-#endif
default:
ASSERT(0);
}
switch (upr->upr_request) {
case SLIC_UPR_STATS:
if (upr->upr_data_h == 0) {
- WRITE_REG(slic_regs->slic_stats, upr->upr_data, FLUSH);
+ slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
+ FLUSH);
} else {
- WRITE_REG64(adapter,
- slic_regs->slic_stats64,
- upr->upr_data,
- slic_regs->slic_addr_upper,
- upr->upr_data_h, FLUSH);
+ slic_reg64_write(adapter, &slic_regs->slic_stats64,
+ upr->upr_data,
+ &slic_regs->slic_addr_upper,
+ upr->upr_data_h, FLUSH);
}
break;
case SLIC_UPR_RLSR:
- WRITE_REG64(adapter,
- slic_regs->slic_rlsr,
- upr->upr_data,
- slic_regs->slic_addr_upper, upr->upr_data_h, FLUSH);
+ slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
+ &slic_regs->slic_addr_upper, upr->upr_data_h,
+ FLUSH);
break;
case SLIC_UPR_RCONFIG:
- DBG_MSG("%s SLIC_UPR_RCONFIG!!!!\n", __func__);
- DBG_MSG("WRITE_REG64 adapter[%p]\n"
- " a->slic_regs[%p] slic_regs[%p]\n"
- " &slic_rconfig[%p] &slic_addr_upper[%p]\n"
- " upr[%p]\n"
- " uprdata[%x] uprdatah[%x]\n",
- adapter, adapter->slic_regs, slic_regs,
- &slic_regs->slic_rconfig, &slic_regs->slic_addr_upper,
- upr, upr->upr_data, upr->upr_data_h);
- WRITE_REG64(adapter,
- slic_regs->slic_rconfig,
- upr->upr_data,
- slic_regs->slic_addr_upper, upr->upr_data_h, FLUSH);
+ slic_reg64_write(adapter, &slic_regs->slic_rconfig,
+ upr->upr_data, &slic_regs->slic_addr_upper,
+ upr->upr_data_h, FLUSH);
break;
-#if SLIC_DUMP_ENABLED
- case SLIC_UPR_DUMP:
-#if 0
- DBG_MSG("%s SLIC_UPR_DUMP!!!!\n", __func__);
- DBG_MSG("WRITE_REG64 adapter[%p]\n"
- " upr_buffer[%x] upr_bufferh[%x]\n"
- " upr_data[%x] upr_datah[%x]\n"
- " cmdbuff[%p] cmdbuffP[%p]\n"
- " dumpbuff[%p] dumpbuffP[%p]\n",
- adapter, upr->upr_buffer, upr->upr_buffer_h,
- upr->upr_data, upr->upr_data_h,
- adapter->card->cmdbuffer,
- (void *)adapter->card->cmdbuffer_phys,
- adapter->card->dumpbuffer, (
- void *)adapter->card->dumpbuffer_phys);
-
- ptr1 = (char *)slic_regs;
- ptr2 = (char *)(&slic_regs->slic_dump_cmd);
- cmdoffset = ptr2 - ptr1;
- DBG_MSG("slic_dump_cmd register offset [%x]\n", cmdoffset);
-#endif
- if (upr->upr_buffer || upr->upr_buffer_h) {
- WRITE_REG64(adapter,
- slic_regs->slic_dump_data,
- upr->upr_buffer,
- slic_regs->slic_addr_upper,
- upr->upr_buffer_h, FLUSH);
- }
- WRITE_REG64(adapter,
- slic_regs->slic_dump_cmd,
- upr->upr_data,
- slic_regs->slic_addr_upper, upr->upr_data_h, FLUSH);
- break;
-#endif
case SLIC_UPR_PING:
- WRITE_REG(slic_regs->slic_ping, 1, FLUSH);
+ slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
break;
default:
ASSERT(0);
unsigned char linkspeed;
unsigned char linkduplex;
- DBG_MSG("%s: %s ISR[%x] linkstatus[%x]\n adapter[%p](%d)\n",
- __func__, adapter->netdev->name, isr, linkstatus, adapter,
- adapter->cardindex);
-
if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
struct slic_shmem *pshmem;
|| (adapter->devid == SLIC_2GB_DEVICE_ID));
linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
- if (linkstatus & GIG_SPEED_1000) {
+ if (linkstatus & GIG_SPEED_1000)
linkspeed = LINK_1000MB;
- DBG_MSG("slicoss: %s (%s) GIGABIT Speed==1000MB ",
- __func__, adapter->netdev->name);
- } else if (linkstatus & GIG_SPEED_100) {
+ else if (linkstatus & GIG_SPEED_100)
linkspeed = LINK_100MB;
- DBG_MSG("slicoss: %s (%s) GIGABIT Speed==100MB ", __func__,
- adapter->netdev->name);
- } else {
+ else
linkspeed = LINK_10MB;
- DBG_MSG("slicoss: %s (%s) GIGABIT Speed==10MB ", __func__,
- adapter->netdev->name);
- }
- if (linkstatus & GIG_FULLDUPLEX) {
+
+ if (linkstatus & GIG_FULLDUPLEX)
linkduplex = LINK_FULLD;
- DBG_MSG(" Duplex == FULL\n");
- } else {
+ else
linkduplex = LINK_HALFD;
- DBG_MSG(" Duplex == HALF\n");
- }
- if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN)) {
- DBG_MSG("slicoss: %s (%s) physport(%d) link still down\n",
- __func__, adapter->netdev->name, adapter->physport);
+ if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
return;
- }
/* link up event, but nothing has changed */
if ((adapter->linkstate == LINK_UP) &&
(linkup == LINK_UP) &&
(adapter->linkspeed == linkspeed) &&
- (adapter->linkduplex == linkduplex)) {
- DBG_MSG("slicoss: %s (%s) port(%d) link still up\n",
- __func__, adapter->netdev->name, adapter->physport);
+ (adapter->linkduplex == linkduplex))
return;
- }
/* link has changed at this point */
/* link has gone from up to down */
if (linkup == LINK_DOWN) {
adapter->linkstate = LINK_DOWN;
- DBG_MSG("slicoss: %s %d LinkDown!\n", __func__,
- adapter->physport);
return;
}
if (adapter->linkstate != LINK_UP) {
/* setup the mac */
- DBG_MSG("%s call slic_config_set\n", __func__);
- slic_config_set(adapter, TRUE);
+ slic_config_set(adapter, true);
adapter->linkstate = LINK_UP;
- DBG_MSG("\n(%s) Link UP: CALL slic_if_start_queue",
- adapter->netdev->name);
- slic_if_start_queue(adapter);
+ netif_start_queue(adapter->netdev);
}
-#if 1
- switch (linkspeed) {
- case LINK_1000MB:
- DBG_MSG
- ("\n(%s) LINK UP!: GIGABIT SPEED == 1000MB duplex[%x]\n",
- adapter->netdev->name, adapter->linkduplex);
- break;
- case LINK_100MB:
- DBG_MSG("\n(%s) LINK UP!: SPEED == 100MB duplex[%x]\n",
- adapter->netdev->name, adapter->linkduplex);
- break;
- default:
- DBG_MSG("\n(%s) LINK UP!: SPEED == 10MB duplex[%x]\n",
- adapter->netdev->name, adapter->linkduplex);
- break;
- }
-#endif
}
/*
__iomem struct slic_regs *slic_regs = adapter->slic_regs;
u32 paddrh = 0;
- DBG_MSG("slicoss: %s (%s) ENTER adapter[%p]\n", __func__,
- adapter->netdev->name, adapter);
ASSERT(adapter->state == ADAPT_DOWN);
memset(rspq, 0, sizeof(struct slic_rspqueue));
rspq->num_pages = SLIC_RSPQ_PAGES_GB;
for (i = 0; i < rspq->num_pages; i++) {
- rspq->vaddr[i] =
- pci_alloc_consistent(adapter->pcidev, PAGE_SIZE,
- &rspq->paddr[i]);
+ rspq->vaddr[i] = pci_alloc_consistent(adapter->pcidev,
+ PAGE_SIZE,
+ &rspq->paddr[i]);
if (!rspq->vaddr[i]) {
- DBG_ERROR
- ("rspqueue_init_failed pci_alloc_consistent\n");
+ dev_err(&adapter->pcidev->dev,
+ "pci_alloc_consistent failed\n");
slic_rspqueue_free(adapter);
return STATUS_FAILURE;
}
(u32) rspq->paddr[i]);
#endif
memset(rspq->vaddr[i], 0, PAGE_SIZE);
-/* DBG_MSG("slicoss: %s UPLOAD RSPBUFF Page pageix[%x] paddr[%p] "
- "vaddr[%p]\n",
- __func__, i, (void *)rspq->paddr[i], rspq->vaddr[i]); */
if (paddrh == 0) {
- WRITE_REG(slic_regs->slic_rbar,
- (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
- DONT_FLUSH);
+ slic_reg32_write(&slic_regs->slic_rbar,
+ (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
+ DONT_FLUSH);
} else {
- WRITE_REG64(adapter,
- slic_regs->slic_rbar64,
- (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
- slic_regs->slic_addr_upper,
- paddrh, DONT_FLUSH);
+ slic_reg64_write(adapter, &slic_regs->slic_rbar64,
+ (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
+ &slic_regs->slic_addr_upper,
+ paddrh, DONT_FLUSH);
}
}
rspq->offset = 0;
rspq->pageindex = 0;
rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
- DBG_MSG("slicoss: %s (%s) EXIT adapter[%p]\n", __func__,
- adapter->netdev->name, adapter);
- return STATUS_SUCCESS;
-}
-
-static int slic_rspqueue_reset(struct adapter *adapter)
-{
- struct slic_rspqueue *rspq = &adapter->rspqueue;
-
- DBG_MSG("slicoss: %s (%s) ENTER adapter[%p]\n", __func__,
- adapter->netdev->name, adapter);
- ASSERT(adapter->state == ADAPT_DOWN);
- ASSERT(rspq);
-
- DBG_MSG("slicoss: Nothing to do. rspq[%p]\n"
- " offset[%x]\n"
- " pageix[%x]\n"
- " rspbuf[%p]\n",
- rspq, rspq->offset, rspq->pageindex, rspq->rspbuf);
-
- DBG_MSG("slicoss: %s (%s) EXIT adapter[%p]\n", __func__,
- adapter->netdev->name, adapter);
return STATUS_SUCCESS;
}
int i;
struct slic_rspqueue *rspq = &adapter->rspqueue;
- DBG_MSG("slicoss: %s adapter[%p] port %d rspq[%p] FreeRSPQ\n",
- __func__, adapter, adapter->physport, rspq);
for (i = 0; i < rspq->num_pages; i++) {
if (rspq->vaddr[i]) {
- DBG_MSG
- ("slicoss: pci_free_consistent rspq->vaddr[%p] \
- paddr[%p]\n",
- rspq->vaddr[i], (void *) rspq->paddr[i]);
pci_free_consistent(adapter->pcidev, PAGE_SIZE,
rspq->vaddr[i], rspq->paddr[i]);
}
#endif
} else {
ASSERT(rspq->offset == SLIC_RSPQ_BUFSINPAGE);
- WRITE_REG64(adapter,
- adapter->slic_regs->slic_rbar64,
- (rspq->
- paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
- adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+ slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
+ (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
+ &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
rspq->pageindex = (++rspq->pageindex) % rspq->num_pages;
rspq->offset = 0;
rspq->rspbuf = (struct slic_rspbuf *)
struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
int i;
- DBG_MSG("slicoss: (%s) adapter[%p] port %d rspq[%p] Free CMDQ Memory\n",
- __func__, adapter, adapter->physport, cmdqmem);
for (i = 0; i < SLIC_CMDQ_MAXPAGES; i++) {
if (cmdqmem->pages[i]) {
- DBG_MSG("slicoss: %s Deallocate page CmdQPage[%p]\n",
- __func__, (void *) cmdqmem->pages[i]);
pci_free_consistent(adapter->pcidev,
PAGE_SIZE,
(void *) cmdqmem->pages[i],
int i;
u32 *pageaddr;
- DBG_MSG("slicoss: %s ENTER adapter[%p]\n", __func__, adapter);
ASSERT(adapter->state == ADAPT_DOWN);
memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
slic_cmdq_addcmdpage(adapter, pageaddr);
}
adapter->slic_handle_ix = 1;
- DBG_MSG("slicoss: %s reset slic_handle_ix to ONE\n", __func__);
return STATUS_SUCCESS;
}
{
struct slic_hostcmd *cmd;
- DBG_MSG("slicoss: %s adapter[%p] port %d FreeCommandsFrom CMDQ\n",
- __func__, adapter, adapter->physport);
cmd = adapter->cmdq_all.head;
while (cmd) {
if (cmd->busy) {
struct sk_buff *skb;
u32 outstanding;
- DBG_MSG("%s ENTER adapter[%p]\n", __func__, adapter);
spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
adapter->cmdq_free.lock.flags);
spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
if (hcmd->busy) {
skb = hcmd->skb;
ASSERT(skb);
- DBG_MSG("slicoss: %s hcmd[%p] skb[%p] ", __func__,
- hcmd, skb);
hcmd->busy = 0;
hcmd->skb = NULL;
- DBG_MSG(" Free SKB\n");
dev_kfree_skb_irq(skb);
}
hcmd = hcmd->next_all;
hcmd = hcmd->next_all;
}
if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
- DBG_ERROR("%s free_count %d != all count %d\n", __func__,
- adapter->cmdq_free.count, adapter->cmdq_all.count);
+ dev_err(&adapter->netdev->dev,
+ "free_count %d != all count %d\n",
+ adapter->cmdq_free.count, adapter->cmdq_all.count);
}
spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
adapter->cmdq_done.lock.flags);
spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
adapter->cmdq_free.lock.flags);
- DBG_MSG("%s EXIT adapter[%p]\n", __func__, adapter);
}
static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
cmdaddr = page;
cmd = (struct slic_hostcmd *)cmdaddr;
-/* DBG_MSG("CMDQ Page addr[%p] ix[%d] pfree[%p]\n", cmdaddr, slic_handle_ix,
- adapter->pfree_slic_handles); */
cmdcnt = 0;
phys_addr = virt_to_bus((void *)page);
cmd->pslic_handle = pslic_handle;
cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
- cmd->busy = FALSE;
+ cmd->busy = false;
cmd->paddrl = phys_addrl;
cmd->paddrh = phys_addrh;
cmd->next_all = prev;
cmdq = &adapter->cmdq_all;
cmdq->count += cmdcnt; /* SLIC_CMDQ_CMDSINPAGE; mooktodo */
tail->next_all = cmdq->head;
- ASSERT(VALID_ADDRESS(prev));
cmdq->head = prev;
cmdq = &adapter->cmdq_free;
spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
cmdq->count += cmdcnt; /* SLIC_CMDQ_CMDSINPAGE; mooktodo */
tail->next = cmdq->head;
- ASSERT(VALID_ADDRESS(prev));
cmdq->head = prev;
spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
}
ASSERT(free_cmdq->head == NULL);
spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
- ASSERT(VALID_ADDRESS(done_cmdq->head));
free_cmdq->head = done_cmdq->head;
free_cmdq->count = done_cmdq->count;
spin_lock(&cmdq->lock.lock);
cmd->busy = 0;
- ASSERT(VALID_ADDRESS(cmdq->head));
cmd->next = cmdq->head;
- ASSERT(VALID_ADDRESS(cmd));
cmdq->head = cmd;
cmdq->count++;
if ((adapter->xmitq_full) && (cmdq->count > 10))
int i, count;
struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
- DBG_MSG("slicoss: %s ENTER adapter[%p]\n", __func__, adapter);
ASSERT(adapter->state == ADAPT_DOWN);
rcvq->tail = NULL;
rcvq->head = NULL;
slic_rcvqueue_free(adapter);
return STATUS_FAILURE;
}
- DBG_MSG("slicoss: %s EXIT adapter[%p]\n", __func__, adapter);
- return STATUS_SUCCESS;
-}
-
-static int slic_rcvqueue_reset(struct adapter *adapter)
-{
- struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
-
- DBG_MSG("slicoss: %s ENTER adapter[%p]\n", __func__, adapter);
- ASSERT(adapter->state == ADAPT_DOWN);
- ASSERT(rcvq);
-
- DBG_MSG("slicoss: Nothing to do. rcvq[%p]\n"
- " count[%x]\n"
- " head[%p]\n"
- " tail[%p]\n",
- rcvq, rcvq->count, rcvq->head, rcvq->tail);
-
- DBG_MSG("slicoss: %s EXIT adapter[%p]\n", __func__, adapter);
return STATUS_SUCCESS;
}
skb = NULL;
}
} else {
- DBG_ERROR("RcvQ Empty!! adapter[%p] rcvq[%p] count[%x]\n",
- adapter, rcvq, rcvq->count);
+ dev_err(&adapter->netdev->dev,
+ "RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
skb = NULL;
}
while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
u32 paddrh;
struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
int i = 0;
+ struct device *dev = &adapter->netdev->dev;
while (i < SLIC_RCVQ_FILLENTRIES) {
struct slic_rcvbuf *rcvbuf;
skb->next = NULL;
#ifdef KLUDGE_FOR_4GB_BOUNDARY
if (paddrl == 0) {
- DBG_ERROR
- ("%s: LOW 32bits PHYSICAL ADDRESS == 0 "
- "skb[%p] PROBLEM\n"
- " skbdata[%p]\n"
- " skblen[%x]\n"
- " paddr[%p]\n"
- " paddrl[%x]\n"
- " paddrh[%x]\n", __func__, skb,
- skb->data, skb->len, paddr, paddrl,
- paddrh);
- DBG_ERROR(" rcvq->head[%p]\n"
- " rcvq->tail[%p]\n"
- " rcvq->count[%x]\n",
- rcvq->head, rcvq->tail, rcvq->count);
- DBG_ERROR("SKIP THIS SKB!!!!!!!!\n");
+ dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
+ __func__);
+ dev_err(dev, "skb[%p] PROBLEM\n", skb);
+ dev_err(dev, " skbdata[%p]\n", skb->data);
+ dev_err(dev, " skblen[%x]\n", skb->len);
+ dev_err(dev, " paddr[%p]\n", paddr);
+ dev_err(dev, " paddrl[%x]\n", paddrl);
+ dev_err(dev, " paddrh[%x]\n", paddrh);
+ dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
+ dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
+ dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
+ dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
goto retry_rcvqfill;
}
#else
if (paddrl == 0) {
- DBG_ERROR
- ("\n\n%s: LOW 32bits PHYSICAL ADDRESS == 0 "
- "skb[%p] GIVE TO CARD ANYWAY\n"
- " skbdata[%p]\n"
- " paddr[%p]\n"
- " paddrl[%x]\n"
- " paddrh[%x]\n", __func__, skb,
- skb->data, paddr, paddrl, paddrh);
+ dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
+ __func__);
+ dev_err(dev, "skb[%p] PROBLEM\n", skb);
+ dev_err(dev, " skbdata[%p]\n", skb->data);
+ dev_err(dev, " skblen[%x]\n", skb->len);
+ dev_err(dev, " paddr[%p]\n", paddr);
+ dev_err(dev, " paddrl[%x]\n", paddrl);
+ dev_err(dev, " paddrh[%x]\n", paddrh);
+ dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
+ dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
+ dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
+ dev_err(dev, "GIVE TO CARD ANYWAY\n");
}
#endif
if (paddrh == 0) {
- WRITE_REG(adapter->slic_regs->slic_hbar,
- (u32) paddrl, DONT_FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_hbar,
+ (u32)paddrl, DONT_FLUSH);
} else {
- WRITE_REG64(adapter,
- adapter->slic_regs->slic_hbar64,
- (u32) paddrl,
- adapter->slic_regs->slic_addr_upper,
- (u32) paddrh, DONT_FLUSH);
+ slic_reg64_write(adapter,
+ &adapter->slic_regs->slic_hbar64,
+ paddrl,
+ &adapter->slic_regs->slic_addr_upper,
+ paddrh, DONT_FLUSH);
}
if (rcvq->head)
rcvq->tail->next = skb;
rcvq->count++;
i++;
} else {
- DBG_ERROR
- ("%s slic_rcvqueue_fill could only get [%d] "
- "skbuffs\n",
- adapter->netdev->name, i);
+ dev_err(&adapter->netdev->dev,
+ "slic_rcvqueue_fill could only get [%d] skbuffs\n",
+ i);
break;
}
}
u32 paddrl;
u32 paddrh;
struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
+ struct device *dev;
ASSERT(skb->len == SLIC_RCVBUF_HEADSIZE);
paddrh = SLIC_GET_ADDR_HIGH(paddr);
if (paddrl == 0) {
- DBG_ERROR
- ("%s: LOW 32bits PHYSICAL ADDRESS == 0 skb[%p] PROBLEM\n"
- " skbdata[%p]\n" " skblen[%x]\n"
- " paddr[%p]\n" " paddrl[%x]\n"
- " paddrh[%x]\n", __func__, skb, skb->data,
- skb->len, paddr, paddrl, paddrh);
- DBG_ERROR(" rcvq->head[%p]\n"
- " rcvq->tail[%p]\n"
- " rcvq->count[%x]\n", rcvq->head, rcvq->tail,
- rcvq->count);
+ dev = &adapter->netdev->dev;
+ dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
+ __func__);
+ dev_err(dev, "skb[%p] PROBLEM\n", skb);
+ dev_err(dev, " skbdata[%p]\n", skb->data);
+ dev_err(dev, " skblen[%x]\n", skb->len);
+ dev_err(dev, " paddr[%p]\n", paddr);
+ dev_err(dev, " paddrl[%x]\n", paddrl);
+ dev_err(dev, " paddrh[%x]\n", paddrh);
+ dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
+ dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
+ dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
}
if (paddrh == 0) {
- WRITE_REG(adapter->slic_regs->slic_hbar, (u32) paddrl,
- DONT_FLUSH);
+ slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
+ DONT_FLUSH);
} else {
- WRITE_REG64(adapter,
- adapter->slic_regs->slic_hbar64,
- paddrl,
- adapter->slic_regs->slic_addr_upper,
- paddrh, DONT_FLUSH);
+ slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
+ paddrl, &adapter->slic_regs->slic_addr_upper,
+ paddrh, DONT_FLUSH);
}
if (rcvq->head)
rcvq->tail->next = skb;
unsigned char *oemfru = (unsigned char *)(&card->config.OemFru);
#endif
- seq_printf(seq, "driver_version : %s", slic_proc_version);
+ seq_printf(seq, "driver_version : %s\n", slic_proc_version);
seq_printf(seq, "Microcode versions: \n");
seq_printf(seq, " Gigabit (gb) : %s %s\n",
MOJAVE_UCODE_VERS_STRING, MOJAVE_UCODE_VERS_DATE);
}
}
-/*=============================================================================
- =============================================================================
- === ===
- === SLIC DUMP MANAGEMENT SECTION ===
- === ===
- === ===
- === Dump routines ===
- === ===
- === ===
- =============================================================================
- ============================================================================*/
-
-#if SLIC_DUMP_ENABLED
-
-#include <stdarg.h>
-
-void *slic_dump_handle; /* thread handle */
-
-/*
- * These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-static int slic_dump_seek(struct file *SLIChandle, u32 file_offset)
-{
- if (SLIChandle->f_pos != file_offset) {
- /*DBG_MSG("slic_dump_seek now needed [%x : %x]\n",
- (u32)SLIChandle->f_pos, (u32)file_offset); */
- if (SLIChandle->f_op->llseek) {
- if (SLIChandle->f_op->
- llseek(SLIChandle, file_offset, 0) != file_offset)
- return 0;
- } else {
- SLIChandle->f_pos = file_offset;
- }
- }
- return 1;
-}
-
-static int slic_dump_write(struct sliccard *card,
- const void *addr, int size, u32 file_offset)
-{
- int r = 1;
- u32 result = 0;
- struct file *SLIChandle = card->dumphandle;
-
-#ifdef HISTORICAL /* legacy */
- down(&SLIChandle->f_dentry->d_inode->i_sem);
-#endif
- if (size) {
- slic_dump_seek(SLIChandle, file_offset);
-
- result =
- SLIChandle->f_op->write(SLIChandle, addr, size,
- &SLIChandle->f_pos);
-
- r = result == size;
- }
-
- card->dumptime_complete = jiffies;
- card->dumptime_delta = card->dumptime_complete - card->dumptime_start;
- card->dumptime_start = jiffies;
-
-#ifdef HISTORICAL
- up(&SLIChandle->f_dentry->d_inode->i_sem);
-#endif
- if (!r) {
- DBG_ERROR("%s: addr[%p] size[%x] result[%x] file_offset[%x]\n",
- __func__, addr, size, result, file_offset);
- }
- return r;
-}
-
-static uint slic_init_dump_thread(struct sliccard *card)
-{
- card->dump_task_id = kthread_run(slic_dump_thread, (void *)card, 0);
-
-/* DBG_MSG("create slic_dump_thread dump_pid[%x]\n", card->dump_pid); */
- if (IS_ERR(card->dump_task_id)) {
- DBG_MSG("create slic_dump_thread FAILED \n");
- return STATUS_FAILURE;
- }
-
- return STATUS_SUCCESS;
-}
-
-static int slic_dump_thread(void *context)
-{
- struct sliccard *card = (struct sliccard *)context;
- struct adapter *adapter;
- struct adapter *dump_adapter = NULL;
- u32 dump_complete = 0;
- u32 delay = SLIC_SECS_TO_JIFFS(PING_TIMER_INTERVAL);
- struct slic_regs *pregs;
- u32 i;
- struct slic_upr *upr, *uprnext;
- u32 dump_card;
-
- ASSERT(card);
-
- card->dumpthread_running = 1;
-
-#ifdef HISTORICAL
- lock_kernel();
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources
- */
- exit_files(current); /* daemonize doesn't do exit_files */
- current->files = init_task.files;
- atomic_inc(¤t->files->count);
-#endif
-
- daemonize("%s", "slicmon");
-
- /* Setup a nice name */
- strcpy(current->comm, "slicmon");
- DBG_ERROR
- ("slic_dump_thread[slicmon] daemon is alive card[%p] pid[%x]\n",
- card, card->dump_task_id->pid);
-
- /*
- * Send me a signal to get me to die (for debugging)
- */
- do {
- /*
- * If card state is not set to up, skip
- */
- if (card->state != CARD_UP) {
- if (card->adapters_activated)
- goto wait;
- else
- goto end_thread;
- }
- /*
- * Check the results of our last ping.
- */
- dump_card = 0;
-#ifdef SLIC_FAILURE_DUMP
- if (card->pingstatus != ISR_PINGMASK) {
- DBG_MSG
- ("\n[slicmon] CARD #%d TIMED OUT - status "
- "%x: DUMP THE CARD!\n",
- card->cardnum, card->pingstatus);
- dump_card = 1;
- }
-#else
- /*
- * Cause a card RESET instead?
- */
- if (card->pingstatus != ISR_PINGMASK) {
- /* todo. do we want to reset the card in production */
- /* DBG_MSG("\n[slicmon] CARD #%d TIMED OUT - "
- status %x: RESET THE CARD!\n", card->cardnum,
- card->pingstatus); */
- DBG_ERROR
- ("\n[slicmon] CARD #%d TIMED OUT - status %x: "
- "DUMP THE CARD!\n",
- card->cardnum, card->pingstatus);
- dump_card = 1;
- }
-#endif
- if ((dump_card)
- || (card->dump_requested == SLIC_DUMP_REQUESTED)) {
- if (card->dump_requested == SLIC_DUMP_REQUESTED) {
- DBG_ERROR
- ("[slicmon]: Dump card Requested: Card %x\n",
- card->cardnum);
- }
- if (card->pingstatus != ISR_PINGMASK) {
- ushort cpuid = 0;
- ushort crashpc = 0;
-
- if (card->adapter[0]) {
- if ((card->adapter[0])->memorylength >=
- CRASH_INFO_OFFSET +
- sizeof(slic_crash_info)) {
- char *crashptr;
- p_slic_crash_info crashinfo;
-
- crashptr =
- ((char *)card->adapter[0]->
- slic_regs) +
- CRASH_INFO_OFFSET;
- crashinfo =
- (p_slic_crash_info)
- crashptr;
- cpuid = crashinfo->cpu_id;
- crashpc = crashinfo->crash_pc;
- }
- }
- DBG_ERROR
- ("[slicmon]: Dump card: Card %x crashed "
- "and failed to answer PING. "
- "CPUID[%x] PC[%x]\n ",
- card->cardnum, cpuid, crashpc);
- }
-
- card->dump_requested = SLIC_DUMP_IN_PROGRESS;
-
- /*
- * Set the card state to DOWN and the adapter states
- * to RESET.They will check this in SimbaCheckForHang
- * and initiate interface reset (which in turn will
- * reinitialize the card).
- */
- card->state = CARD_DOWN;
-
- for (i = 0; i < card->card_size; i++) {
- adapter = card->adapter[i];
- if (adapter) {
- slic_if_stop_queue(adapter);
-
- if (adapter->state == ADAPT_UP) {
- adapter->state = ADAPT_RESET;
- adapter->linkstate = LINK_DOWN;
- DBG_ERROR
- ("[slicmon]: SLIC Card[%d] "
- "Port[%d] adapter[%p] "
- "down\n",
- (uint) card->cardnum,
- (uint) i, adapter);
- }
-#if SLIC_GET_STATS_TIMER_ENABLED
- /* free stats timer */
- if (adapter->statstimerset) {
- adapter->statstimerset = 0;
- del_timer(&adapter->statstimer);
- }
-#endif
- }
- }
-
- for (i = 0; i < card->card_size; i++) {
- adapter = card->adapter[i];
- if ((adapter) && (adapter->activated)) {
- pregs = adapter->slic_regs;
- dump_adapter = adapter;
-
- /*
- * If the dump status is zero, then
- * the utility processor has crashed.
- * If this is the case, any pending
- * utilityprocessor requests will not
- * complete and our dump commands will
- * not be issued.
- *
- * To avoid this we will clear any
- * pending utility processor requests
- * now.
- */
- if (!card->pingstatus) {
- spin_lock_irqsave(
- &adapter->upr_lock.lock,
- adapter->upr_lock.flags);
- upr = adapter->upr_list;
- while (upr) {
- uprnext = upr->next;
- kfree(upr);
- upr = uprnext;
- }
- adapter->upr_list = 0;
- adapter->upr_busy = 0;
- spin_unlock_irqrestore(
- &adapter->upr_lock.lock,
- adapter->upr_lock.flags);
- }
-
- slic_dump_card(card, FALSE);
- dump_complete = 1;
- }
-
- if (dump_complete) {
- DBG_ERROR("SLIC Dump Complete\n");
- /* Only dump the card one time */
- break;
- }
- }
-
- if (dump_adapter) {
- DBG_ERROR
- ("slic dump completed. "
- "Reenable interfaces\n");
- slic_card_init(card, dump_adapter);
-
- /*
- * Reenable the adapters that were reset
- */
- for (i = 0; i < card->card_size; i++) {
- adapter = card->adapter[i];
- if (adapter) {
- if (adapter->state ==
- ADAPT_RESET) {
- DBG_ERROR
- ("slicdump: SLIC "
- "Card[%d] Port[%d] adapter[%p] "
- "bring UP\n",
- (uint) card->
- cardnum, (uint) i,
- adapter);
- adapter->state =
- ADAPT_DOWN;
- adapter->linkstate =
- LINK_DOWN;
- slic_entry_open
- (adapter->netdev);
- }
- }
- }
-
- card->dump_requested = SLIC_DUMP_DONE;
- }
- } else {
- /* if pingstatus != ISR_PINGMASK) || dump_requested...ELSE
- * We received a valid ping response.
- * Clear the Pingstatus field, find a valid adapter
- * structure and send another ping.
- */
- for (i = 0; i < card->card_size; i++) {
- adapter = card->adapter[i];
- if (adapter && (adapter->state == ADAPT_UP)) {
- card->pingstatus = 0;
- slic_upr_request(adapter, SLIC_UPR_PING,
- 0, 0, 0, 0);
- break; /* Only issue one per card */
- }
- }
- }
-wait:
- SLIC_INTERRUPTIBLE_SLEEP_ON_TIMEOUT(card->dump_wq, delay);
- } while (!signal_pending(current));
-
-end_thread:
-/* DBG_MSG("[slicmon] slic_dump_thread card[%p] pid[%x] ENDING\n",
- card, card->dump_pid); */
- card->dumpthread_running = 0;
-
- return 0;
-}
-
-/*
- * Read a single byte from our dump index file. This
- * value is used as our suffix for our dump path. The
- * value is incremented and written back to the file
- */
-static unsigned char slic_get_dump_index(char *path)
-{
- unsigned char index = 0;
-#ifdef SLIC_DUMP_INDEX_SUPPORT
- u32 status;
- void *FileHandle;
- u32 offset;
-
- offset = 0;
-
- /*
- * Open the index file. If one doesn't exist, create it
- */
- status = create_file(&FileHandle);
-
- if (status != STATUS_SUCCESS)
- return (unsigned char) 0;
-
- status = read_file(FileHandle, &index, 1, &offset);
-
- index++;
-
- status = write_file(FileHandle, &index, 1, &offset);
-
- close_file(FileHandle);
-#else
- index = 0;
-#endif
- return index;
-}
-
-static struct file *slic_dump_open_file(struct sliccard *card)
-{
- struct file *SLIChandle = NULL;
- struct dentry *dentry = NULL;
- struct inode *inode = NULL;
- char SLICfile[50];
-
- card->dumpfile_fs = get_fs();
-
- set_fs(KERNEL_DS);
-
- memset(SLICfile, 0, sizeof(SLICfile));
- sprintf(SLICfile, "/var/tmp/slic%d-dump-%d", card->cardnum,
- (uint) card->dump_count);
- card->dump_count++;
-
- SLIChandle =
- filp_open(SLICfile, O_CREAT | O_RDWR | O_SYNC | O_LARGEFILE, 0666);
-
- DBG_MSG("[slicmon]: Dump Card #%d to file: %s \n", card->cardnum,
- SLICfile);
-
-/* DBG_MSG("[slicmon] filp_open %s SLIChandle[%p]\n", SLICfile, SLIChandle);*/
-
- if (IS_ERR(SLIChandle))
- goto end_slicdump;
-
- dentry = SLIChandle->f_dentry;
- inode = dentry->d_inode;
-
-/* DBG_MSG("[slicmon] inode[%p] i_nlink[%x] i_mode[%x] i_op[%p] i_fop[%p]\n"
- "f_op->write[%p]\n",
- inode, inode->i_nlink, inode->i_mode, inode->i_op,
- inode->i_fop, SLIChandle->f_op->write); */
- if (inode->i_nlink > 1)
- goto close_slicdump; /* multiple links - don't dump */
-#ifdef HISTORICAL
- if (!S_ISREG(inode->i_mode))
- goto close_slicdump;
-#endif
- if (!inode->i_op || !inode->i_fop)
- goto close_slicdump;
-
- if (!SLIChandle->f_op->write)
- goto close_slicdump;
-
- /*
- * If we got here we have SUCCESSFULLY OPENED the dump file
- */
-/* DBG_MSG("opened %s SLIChandle[%p]\n", SLICfile, SLIChandle); */
- return SLIChandle;
-
-close_slicdump:
- DBG_MSG("[slicmon] slic_dump_open_file failed close SLIChandle[%p]\n",
- SLIChandle);
- filp_close(SLIChandle, NULL);
-
-end_slicdump:
- set_fs(card->dumpfile_fs);
-
- return NULL;
-}
-
-static void slic_dump_close_file(struct sliccard *card)
-{
-
-/* DBG_MSG("[slicmon] slic_dump_CLOSE_file close SLIChandle[%p]\n",
- card->dumphandle); */
-
- filp_close(card->dumphandle, NULL);
-
- set_fs(card->dumpfile_fs);
-}
-
-static u32 slic_dump_card(struct sliccard *card, bool resume)
-{
- struct adapter *adapter = card->master;
- u32 status;
- u32 queue;
- u32 len, offset;
- u32 sram_size, dram_size, regs;
- struct sliccore_hdr corehdr;
- u32 file_offset;
- char *namestr;
- u32 i;
- u32 max_queues = 0;
- u32 result;
-
- card->dumphandle = slic_dump_open_file(card);
-
- if (card->dumphandle == NULL) {
- DBG_MSG("[slicmon] Cant create Dump file - dump failed\n");
- return -ENOMEM;
- }
- if (!card->dumpbuffer) {
- DBG_MSG("[slicmon] Insufficient memory for dump\n");
- return -ENOMEM;
- }
- if (!card->cmdbuffer) {
- DBG_MSG("[slicmon] Insufficient cmd memory for dump\n");
- return -ENOMEM;
- }
-
- /*
- * Write the file version to the core header.
- */
- namestr = slic_proc_version;
- for (i = 0; i < (DRIVER_NAME_SIZE - 1); i++, namestr++) {
- if (!namestr)
- break;
- corehdr.driver_version[i] = *namestr;
- }
- corehdr.driver_version[i] = 0;
-
- file_offset = sizeof(struct sliccore_hdr);
-
- /*
- * Issue the following debug commands to the SLIC:
- * - Halt both receive and transmit
- * - Dump receive registers
- * - Dump transmit registers
- * - Dump sram
- * - Dump dram
- * - Dump queues
- */
- DBG_MSG("slicDump HALT Receive Processor\n");
- card->dumptime_start = jiffies;
-
- status = slic_dump_halt(card, PROC_RECEIVE);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR
- ("Cant halt receive sequencer - dump failed status[%x]\n",
- status);
- goto done;
- }
-
- DBG_MSG("slicDump HALT Transmit Processor\n");
- status = slic_dump_halt(card, PROC_TRANSMIT);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("Cant halt transmit sequencer - dump failed\n");
- goto done;
- }
-
- /* Dump receive regs */
- status = slic_dump_reg(card, PROC_RECEIVE);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("Cant dump receive registers - dump failed\n");
- goto done;
- }
-
- DBG_MSG("slicDump Write Receive REGS len[%x] offset[%x]\n",
- (SLIC_NUM_REG * 4), file_offset);
-
- result =
- slic_dump_write(card, card->dumpbuffer, SLIC_NUM_REG * 4,
- file_offset);
- if (!result) {
- DBG_ERROR
- ("Cant write rcv registers to dump file - dump failed\n");
- goto done;
- }
-
- corehdr.RcvRegOff = file_offset;
- corehdr.RcvRegsize = SLIC_NUM_REG * 4;
- file_offset += SLIC_NUM_REG * 4;
-
- /* Dump transmit regs */
- status = slic_dump_reg(card, PROC_TRANSMIT);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("Cant dump transmit registers - dump failed\n");
- goto done;
- }
-
- DBG_MSG("slicDump Write XMIT REGS len[%x] offset[%x]\n",
- (SLIC_NUM_REG * 4), file_offset);
-
- result =
- slic_dump_write(card, card->dumpbuffer, SLIC_NUM_REG * 4,
- file_offset);
- if (!result) {
- DBG_ERROR
- ("Cant write xmt registers to dump file - dump failed\n");
- goto done;
- }
-
- corehdr.XmtRegOff = file_offset;
- corehdr.XmtRegsize = SLIC_NUM_REG * 4;
- file_offset += SLIC_NUM_REG * 4;
-
- regs = SLIC_GBMAX_REG;
-
- corehdr.FileRegOff = file_offset;
- corehdr.FileRegsize = regs * 4;
-
- for (offset = 0; regs;) {
- len = MIN(regs, 16); /* Can only xfr 16 regs at a time */
-
- status = slic_dump_data(card, offset, (ushort) len, DESC_RFILE);
-
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("Cant dump register file - dump failed\n");
- goto done;
- }
-
- DBG_MSG("slicDump Write RegisterFile len[%x] offset[%x]\n",
- (len * 4), file_offset);
-
- result =
- slic_dump_write(card, card->dumpbuffer, len * 4,
- file_offset);
- if (!result) {
- DBG_ERROR
- ("Cant write register file to dump file - "
- "dump failed\n");
- goto done;
- }
-
- file_offset += len * 4;
- offset += len;
- regs -= len;
- }
-
- dram_size = card->config.DramSize * 0x10000;
-
- switch (adapter->devid) {
- case SLIC_2GB_DEVICE_ID:
- sram_size = SLIC_SRAM_SIZE2GB;
- break;
- case SLIC_1GB_DEVICE_ID:
- sram_size = SLIC_SRAM_SIZE1GB;
- break;
- default:
- sram_size = 0;
- ASSERT(0);
- break;
- }
-
- corehdr.SramOff = file_offset;
- corehdr.Sramsize = sram_size;
-
- for (offset = 0; sram_size;) {
- len = MIN(sram_size, DUMP_BUF_SIZE);
- status = slic_dump_data(card, offset, (ushort) len, DESC_SRAM);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR
- ("[slicmon] Cant dump SRAM at offset %x - "
- "dump failed\n", (uint) offset);
- goto done;
- }
-
- DBG_MSG("[slicmon] slicDump Write SRAM len[%x] offset[%x]\n",
- len, file_offset);
-
- result =
- slic_dump_write(card, card->dumpbuffer, len, file_offset);
- if (!result) {
- DBG_ERROR
- ("[slicmon] Cant write SRAM to dump file - "
- "dump failed\n");
- goto done;
- }
-
- file_offset += len;
- offset += len;
- sram_size -= len;
- }
-
- corehdr.DramOff = file_offset;
- corehdr.Dramsize = dram_size;
-
- for (offset = 0; dram_size;) {
- len = MIN(dram_size, DUMP_BUF_SIZE);
-
- status = slic_dump_data(card, offset, (ushort) len, DESC_DRAM);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR
- ("[slicmon] Cant dump dram at offset %x - "
- "dump failed\n", (uint) offset);
- goto done;
- }
-
- DBG_MSG("slicDump Write DRAM len[%x] offset[%x]\n", len,
- file_offset);
-
- result =
- slic_dump_write(card, card->dumpbuffer, len, file_offset);
- if (!result) {
- DBG_ERROR
- ("[slicmon] Cant write DRAM to dump file - "
- "dump failed\n");
- goto done;
- }
-
- file_offset += len;
- offset += len;
- dram_size -= len;
- }
-
- max_queues = SLIC_MAX_QUEUE;
-
- for (queue = 0; queue < max_queues; queue++) {
- u32 *qarray = (u32 *) card->dumpbuffer;
- u32 qarray_physl = card->dumpbuffer_physl;
- u32 qarray_physh = card->dumpbuffer_physh;
- u32 qstart;
- u32 qdelta;
- u32 qtotal = 0;
-
- DBG_MSG("[slicmon] Start Dump of QUEUE #0x%x\n", (uint) queue);
-
- for (offset = 0; offset < (DUMP_BUF_SIZE >> 2); offset++) {
- qstart = jiffies;
- qdelta = 0;
-
- status = slic_dump_queue(card,
- qarray_physl,
- qarray_physh, queue);
- qarray_physl += 4;
-
- if (status != STATUS_SUCCESS)
- break;
-
- if (jiffies > qstart) {
- qdelta = jiffies - qstart;
- qtotal += qdelta;
- }
- }
-
- if (offset)
- qdelta = qtotal / offset;
- else
- qdelta = 0;
-
-/* DBG_MSG(" slicDump Write QUEUE #0x%x len[%x] offset[%x] "
- "avgjiffs[%x]\n", queue, (offset*4), file_offset, qdelta); */
-
- result =
- slic_dump_write(card, card->dumpbuffer, offset * 4,
- file_offset);
-
- if (!result) {
- DBG_ERROR
- ("[slicmon] Cant write QUEUES to dump file - "
- "dump failed\n");
- goto done;
- }
-
- corehdr.queues[queue].queueOff = file_offset;
- corehdr.queues[queue].queuesize = offset * 4;
- file_offset += offset * 4;
-
-/* DBG_MSG(" Reload QUEUE #0x%x elements[%x]\n", (uint)queue, offset);*/
- /*
- * Fill the queue back up
- */
- for (i = 0; i < offset; i++) {
- qstart = jiffies;
- qdelta = 0;
-
- status = slic_dump_load_queue(card, qarray[i], queue);
- if (status != STATUS_SUCCESS)
- break;
-
- if (jiffies > qstart) {
- qdelta = jiffies - qstart;
- qtotal += qdelta;
- }
- }
-
- if (offset)
- qdelta = qtotal / offset;
- else
- qdelta = 0;
-
-/* DBG_MSG(" Reload DONE avgjiffs[%x]\n", qdelta); */
-
- resume = 1;
- }
-
- len = SLIC_GB_CAMAB_SZE * 4;
- status = slic_dump_cam(card, 0, len, DUMP_CAM_A);
- if (status != STATUS_SUCCESS) {
- DBG_ERROR("[slicmon] Can't dump CAM_A - dump failed\n");
- goto done;
- }
-
- result = slic_dump_write(card, card->dumpbuffer, len, file_offset);
- if (result) {
- DBG_ERROR
- ("[slicmon] Can't write CAM_A data to dump file - "
- "dump failed\n");
- goto done;
- }
- corehdr.CamAMOff = file_offset;
- corehdr.CamASize = len;
- file_offset += len;
-
- len = SLIC_GB_CAMCD_SZE * 4;
- status = slic_dump_cam(card, 0, len, DUMP_CAM_C);
- if (status) {
- DBG_ERROR("[slicmon] Can't dump CAM_C - dump failed\n");
- goto done;
- }
-
- result = slic_dump_write(card, card->dumpbuffer, len, file_offset);
- if (result) {
- DBG_ERROR
- ("[slicmon] Can't write CAM_C data to dump file - "
- "dump failed\n");
- goto done;
- }
- corehdr.CamCMOff = file_offset;
- corehdr.CamCSize = len;
- file_offset += len;
-
-done:
- /*
- * Write out the core header
- */
- file_offset = 0;
- DBG_MSG("[slicmon] Write CoreHeader len[%x] offset[%x]\n",
- (uint) sizeof(struct sliccore_hdr), file_offset);
-
- result =
- slic_dump_write(card, &corehdr, sizeof(struct sliccore_hdr),
- file_offset);
- DBG_MSG("[slicmon] corehdr xoff[%x] xsz[%x]\n"
- " roff[%x] rsz[%x] fileoff[%x] filesz[%x]\n"
- " sramoff[%x] sramsz[%x], dramoff[%x] dramsz[%x]\n"
- " corehdr_offset[%x]\n", corehdr.XmtRegOff,
- corehdr.XmtRegsize, corehdr.RcvRegOff, corehdr.RcvRegsize,
- corehdr.FileRegOff, corehdr.FileRegsize, corehdr.SramOff,
- corehdr.Sramsize, corehdr.DramOff, corehdr.Dramsize,
- (uint) sizeof(struct sliccore_hdr));
- for (i = 0; i < max_queues; i++) {
- DBG_MSG("[slicmon] QUEUE 0x%x offset[%x] size[%x]\n",
- (uint) i, corehdr.queues[i].queueOff,
- corehdr.queues[i].queuesize);
-
- }
-
- slic_dump_close_file(card);
-
- if (resume) {
- DBG_MSG("slicDump RESTART RECEIVE and XMIT PROCESSORS\n\n");
- slic_dump_resume(card, PROC_RECEIVE);
- slic_dump_resume(card, PROC_TRANSMIT);
- }
-
- return status;
-}
-
-static u32 slic_dump_halt(struct sliccard *card, unsigned char proc)
-{
- unsigned char *cmd = card->cmdbuffer;
-
- *cmd = COMMAND_BYTE(CMD_HALT, 0, proc);
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_resume(struct sliccard *card, unsigned char proc)
-{
- unsigned char *cmd = card->cmdbuffer;
-
- *cmd = COMMAND_BYTE(CMD_RUN, 0, proc);
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_reg(struct sliccard *card, unsigned char proc)
-{
- struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
- dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, proc);
- dump->desc = DESC_REG;
- dump->count = 0;
- dump->addr = 0;
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh,
- card->dumpbuffer_physl,
- card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_data(struct sliccard *card,
- u32 addr, ushort count, unsigned char desc)
-{
- struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
- dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, PROC_RECEIVE);
- dump->desc = desc;
- dump->count = count;
- dump->addr = addr;
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh,
- card->dumpbuffer_physl,
- card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_queue(struct sliccard *card,
- u32 addr, u32 buf_physh, u32 queue)
-{
- struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
- dump->cmd = COMMAND_BYTE(CMD_DUMP, 0, PROC_RECEIVE);
- dump->desc = DESC_QUEUE;
- dump->count = 1;
- dump->addr = queue;
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh,
- addr, card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_load_queue(struct sliccard *card, u32 data,
- u32 queue)
-{
- struct dump_cmd *load = (struct dump_cmd *) card->cmdbuffer;
-
- load->cmd = COMMAND_BYTE(CMD_LOAD, 0, PROC_RECEIVE);
- load->desc = DESC_QUEUE;
- load->count = (ushort) queue;
- load->addr = data;
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh, 0, 0);
-}
-
-static u32 slic_dump_cam(struct sliccard *card,
- u32 addr, u32 count, unsigned char desc)
-{
- struct dump_cmd *dump = (struct dump_cmd *)card->cmdbuffer;
-
- dump->cmd = COMMAND_BYTE(CMD_CAM_OPS, 0, PROC_NONE);
- dump->desc = desc;
- dump->count = count;
- dump->addr = 0;
-
- return slic_dump_send_cmd(card,
- card->cmdbuffer_physl,
- card->cmdbuffer_physh,
- addr, card->dumpbuffer_physh);
-}
-
-static u32 slic_dump_send_cmd(struct sliccard *card,
- u32 cmd_physl,
- u32 cmd_physh,
- u32 buf_physl, u32 buf_physh)
-{
- ulong timeout = SLIC_MS_TO_JIFFIES(500); /* 500 msec */
- u32 attempts = 5;
- u32 delay = SLIC_MS_TO_JIFFIES(10); /* 10 msec */
- struct adapter *adapter = card->master;
-
- ASSERT(adapter);
- do {
- /*
- * Zero the Dumpstatus field of the adapter structure
- */
- card->dumpstatus = 0;
- /*
- * Issue the dump command via a utility processor request.
- *
- * Kludge: We use the Informationbuffer parameter to hold
- * the buffer address
- */
- slic_upr_request(adapter, SLIC_UPR_DUMP, cmd_physl, cmd_physh,
- buf_physl, buf_physh);
-
- timeout += jiffies;
- /*
- * Spin until completion or timeout.
- */
- while (!card->dumpstatus) {
- int num_sleeps = 0;
-
- if (jiffies > timeout) {
- /*
- * Complete the timed-out DUMP UPR request.
- */
- slic_upr_request_complete(adapter, 0);
- DBG_ERROR
- ("%s: TIMED OUT num_sleeps[%x] "
- "status[%x]\n",
- __func__, num_sleeps, STATUS_FAILURE);
-
- return STATUS_FAILURE;
- }
- num_sleeps++;
- SLIC_INTERRUPTIBLE_SLEEP_ON_TIMEOUT(card->dump_wq,
- delay);
- }
-
- if (card->dumpstatus & ISR_UPCERR) {
- /*
- * Error (or queue empty)
- */
-/* DBG_ERROR("[slicmon] %s: DUMP_STATUS & ISR_UPCERR status[%x]\n",
- __func__, STATUS_FAILURE); */
-
- return STATUS_FAILURE;
- } else if (card->dumpstatus & ISR_UPCBSY) {
- /*
- * Retry
- */
- DBG_ERROR("%s: ISR_UPCBUSY attempt[%x]\n", __func__,
- attempts);
-
- attempts--;
- } else {
- /*
- * success
- */
- return STATUS_SUCCESS;
- }
-
- } while (attempts);
-
- DBG_ERROR("%s: GAVE UP AFTER SEVERAL ATTEMPTS status[%x]\n",
- __func__, STATUS_FAILURE);
-
- /*
- * Gave up after several attempts
- */
- return STATUS_FAILURE;
-}
-
-#endif
-/*=============================================================================
- =============================================================================
- === ===
- === *** END **** END **** END **** END *** ===
- === SLIC DUMP MANAGEMENT SECTION ===
- === ===
- === ===
- === ===
- =============================================================================
- ============================================================================*/
-
/******************************************************************************/
/**************** MODULE INITIATION / TERMINATION FUNCTIONS ***************/
/******************************************************************************/
.id_table = slic_pci_tbl,
.probe = slic_entry_probe,
.remove = slic_entry_remove,
-#if SLIC_POWER_MANAGEMENT_ENABLED
- .suspend = slicpm_suspend,
- .resume = slicpm_resume,
-#endif
-/* .shutdown = slic_shutdown, MOOK_INVESTIGATE */
};
static int __init slic_module_init(void)
{
- struct pci_device_id *pcidev;
- int ret;
-
-/* DBG_MSG("slicoss: %s ENTER cpu %d\n", __func__, smp_processor_id()); */
-
slic_init_driver();
if (debug >= 0 && slic_debug != debug)
- printk(SLICLEVEL "slicoss: debug level is %d.\n", debug);
+ printk(KERN_DEBUG KBUILD_MODNAME ": debug level is %d.\n",
+ debug);
if (debug >= 0)
slic_debug = debug;
- pcidev = (struct pci_device_id *)slic_driver.id_table;
-/* DBG_MSG("slicoss: %s call pci_module_init jiffies[%lx] cpu #%d\n",
- __func__, jiffies, smp_processor_id()); */
-
- ret = pci_register_driver(&slic_driver);
-
-/* DBG_MSG("slicoss: %s EXIT after call pci_module_init jiffies[%lx] "
- "cpu #%d status[%x]\n",__func__, jiffies,
- smp_processor_id(), ret); */
-
- return ret;
+ return pci_register_driver(&slic_driver);
}
static void __exit slic_module_cleanup(void)
{
-/* DBG_MSG("slicoss: %s ENTER\n", __func__); */
pci_unregister_driver(&slic_driver);
slic_debug_cleanup();
-/* DBG_MSG("slicoss: %s EXIT\n", __func__); */
}
module_init(slic_module_init);
projects / linux-2.6-omap-h63xx.git / blobdiff