--- /dev/null
+/*
+ *************************************************************************
+ * Ralink Tech Inc.
+ * 5F., No.36, Taiyuan St., Jhubei City,
+ * Hsinchu County 302,
+ * Taiwan, R.O.C.
+ *
+ * (c) Copyright 2002-2007, Ralink Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ *************************************************************************
+
+ Module Name:
+ rtmp_def.h
+
+ Abstract:
+ Miniport related definition header
+
+ Revision History:
+ Who When What
+ -------- ---------- ----------------------------------------------
+ Paul Lin 08-01-2002 created
+ John Chang 08-05-2003 add definition for 11g & other drafts
+*/
+#ifndef __RTMP_DEF_H__
+#define __RTMP_DEF_H__
+
+#include "oid.h"
+
+#undef AP_WSC_INCLUDED
+#undef STA_WSC_INCLUDED
+#undef WSC_INCLUDED
+
+
+#ifdef CONFIG_STA_SUPPORT
+#endif // CONFIG_STA_SUPPORT //
+
+#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
+#define WSC_INCLUDED
+#endif
+//
+// Debug information verbosity: lower values indicate higher urgency
+//
+#define RT_DEBUG_OFF 0
+#define RT_DEBUG_ERROR 1
+#define RT_DEBUG_WARN 2
+#define RT_DEBUG_TRACE 3
+#define RT_DEBUG_INFO 4
+#define RT_DEBUG_LOUD 5
+
+#define NIC_TAG ((ULONG)'0682')
+#define NIC_DBG_STRING ("**RT28xx**")
+
+#ifdef SNMP_SUPPORT
+// for snmp
+// to get manufacturer OUI, kathy, 2008_0220
+#define ManufacturerOUI_LEN 3
+#define ManufacturerNAME ("Ralink Technology Company.")
+#define ResourceTypeIdName ("Ralink_ID")
+#endif
+
+
+//#define PACKED
+
+#define RALINK_2883_VERSION ((UINT32)0x28830300)
+#define RALINK_2880E_VERSION ((UINT32)0x28720200)
+#define RALINK_3070_VERSION ((UINT32)0x30700200)
+
+//
+// NDIS version in use by the NIC driver.
+// The high byte is the major version. The low byte is the minor version.
+//
+#ifdef NDIS51_MINIPORT
+#define NIC_DRIVER_VERSION 0x0501
+#else
+#define NIC_DRIVER_VERSION 0x0500
+#endif
+
+//
+// NDIS media type, current is ethernet, change if native wireless supported
+//
+#define NIC_MEDIA_TYPE NdisMedium802_3
+#define NIC_PCI_HDR_LENGTH 0xe2
+#define NIC_MAX_PACKET_SIZE 2304
+#define NIC_HEADER_SIZE 14
+#define MAX_MAP_REGISTERS_NEEDED 32
+#define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue.
+
+//
+// interface type, we use PCI
+//
+#define NIC_INTERFACE_TYPE NdisInterfacePci
+#define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive
+
+//
+// buffer size passed in NdisMQueryAdapterResources
+// We should only need three adapter resources (IO, interrupt and memory),
+// Some devices get extra resources, so have room for 10 resources
+// UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
+
+
+#define NIC_RESOURCE_B//
+// IO space length
+//
+#define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC)
+
+#define MAX_RX_PKT_LEN 1520
+
+//
+// Entry number for each DMA descriptor ring
+//
+
+
+#ifdef RT2870
+#define TX_RING_SIZE 8 // 1
+#define PRIO_RING_SIZE 8
+#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
+#define RX_RING_SIZE 8
+#define MAX_TX_PROCESS 4
+#define LOCAL_TXBUF_SIZE 2048
+#endif // RT2870 //
+
+#ifdef MULTIPLE_CARD_SUPPORT
+// MC: Multple Cards
+#define MAX_NUM_OF_MULTIPLE_CARD 32
+#endif // MULTIPLE_CARD_SUPPORT //
+
+#define MAX_RX_PROCESS 128 //64 //32
+#define NUM_OF_LOCAL_TXBUF 2
+#define TXD_SIZE 16
+#define TXWI_SIZE 16
+#define RXD_SIZE 16
+#define RXWI_SIZE 16
+// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
+#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated
+#define MGMT_DMA_BUFFER_SIZE 1536 //2048
+#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096
+#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096
+#define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE
+#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size
+#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096
+#define MAX_NUM_OF_TUPLE_CACHE 2
+#define MAX_MCAST_LIST_SIZE 32
+#define MAX_LEN_OF_VENDOR_DESC 64
+//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
+#define MAX_SIZE_OF_MCAST_PSQ 32
+
+#define MAX_RX_PROCESS_CNT (RX_RING_SIZE)
+
+
+#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK
+#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
+#define MAX_PACKETS_IN_PS_QUEUE 128 //32
+#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
+
+
+//2008/09/11:KH add to support efuse<--
+#define MAX_EEPROM_BIN_FILE_SIZE 1024
+//2008/09/11:KH add to support efuse-->
+
+// RxFilter
+#define STANORMAL 0x17f97
+#define APNORMAL 0x15f97
+//
+// RTMP_ADAPTER flags
+//
+#define fRTMP_ADAPTER_MAP_REGISTER 0x00000001
+#define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002
+#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004
+#define fRTMP_ADAPTER_SCATTER_GATHER 0x00000008
+#define fRTMP_ADAPTER_SEND_PACKET_ERROR 0x00000010
+#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
+#define fRTMP_ADAPTER_HALT_IN_PROGRESS 0x00000040
+#define fRTMP_ADAPTER_RESET_IN_PROGRESS 0x00000080
+#define fRTMP_ADAPTER_NIC_NOT_EXIST 0x00000100
+#define fRTMP_ADAPTER_TX_RING_ALLOCATED 0x00000200
+#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS 0x00000400
+#define fRTMP_ADAPTER_MIMORATE_INUSED 0x00000800
+#define fRTMP_ADAPTER_RX_RING_ALLOCATED 0x00001000
+#define fRTMP_ADAPTER_INTERRUPT_ACTIVE 0x00002000
+#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS 0x00004000
+#define fRTMP_ADAPTER_REASSOC_IN_PROGRESS 0x00008000
+#define fRTMP_ADAPTER_MEDIA_STATE_PENDING 0x00010000
+#define fRTMP_ADAPTER_RADIO_OFF 0x00020000
+#define fRTMP_ADAPTER_BULKOUT_RESET 0x00040000
+#define fRTMP_ADAPTER_BULKIN_RESET 0x00080000
+#define fRTMP_ADAPTER_RDG_ACTIVE 0x00100000
+#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
+#define fRTMP_ADAPTER_SCAN_2040 0x04000000
+#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
+
+#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx.
+#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
+#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
+
+// Lock bit for accessing different ring buffers
+//#define fRTMP_ADAPTER_TX_RING_BUSY 0x80000000
+//#define fRTMP_ADAPTER_MGMT_RING_BUSY 0x40000000
+//#define fRTMP_ADAPTER_ATIM_RING_BUSY 0x20000000
+//#define fRTMP_ADAPTER_RX_RING_BUSY 0x10000000
+
+// Lock bit for accessing different queue
+//#define fRTMP_ADAPTER_TX_QUEUE_BUSY 0x08000000
+//#define fRTMP_ADAPTER_MGMT_QUEUE_BUSY 0x04000000
+
+//
+// STA operation status flags
+//
+#define fOP_STATUS_INFRA_ON 0x00000001
+#define fOP_STATUS_ADHOC_ON 0x00000002
+#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004
+#define fOP_STATUS_SHORT_SLOT_INUSED 0x00000008
+#define fOP_STATUS_SHORT_PREAMBLE_INUSED 0x00000010
+#define fOP_STATUS_RECEIVE_DTIM 0x00000020
+//#define fOP_STATUS_TX_RATE_SWITCH_ENABLED 0x00000040
+#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080
+#define fOP_STATUS_WMM_INUSED 0x00000100
+#define fOP_STATUS_AGGREGATION_INUSED 0x00000200
+#define fOP_STATUS_DOZE 0x00000400 // debug purpose
+#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation
+#define fOP_STATUS_APSD_INUSED 0x00001000
+#define fOP_STATUS_TX_AMSDU_INUSED 0x00002000
+#define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000
+#define fOP_STATUS_WAKEUP_NOW 0x00008000
+#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
+
+#ifdef DOT11N_DRAFT3
+#define fOP_STATUS_SCAN_2040 0x00040000
+#endif // DOT11N_DRAFT3 //
+
+#define CCKSETPROTECT 0x1
+#define OFDMSETPROTECT 0x2
+#define MM20SETPROTECT 0x4
+#define MM40SETPROTECT 0x8
+#define GF20SETPROTECT 0x10
+#define GR40SETPROTECT 0x20
+#define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
+
+//
+// AP's client table operation status flags
+//
+#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame
+#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame
+#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back
+#define fCLIENT_STATUS_AMSDU_INUSED 0x00000008
+#define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010
+#define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020
+#define fCLIENT_STATUS_TxSTBC_CAPABLE 0x00000040
+#define fCLIENT_STATUS_RxSTBC_CAPABLE 0x00000080
+#define fCLIENT_STATUS_HTC_CAPABLE 0x00000100
+#define fCLIENT_STATUS_RDG_CAPABLE 0x00000200
+#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400
+#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
+
+#ifdef DOT11N_DRAFT3
+#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE 0x00001000
+#endif // DOT11N_DRAFT3 //
+
+#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
+//
+// STA configuration flags
+//
+//#define fSTA_CFG_ENABLE_TX_BURST 0x00000001
+
+// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
+#define HT_NO_PROTECT 0
+#define HT_LEGACY_PROTECT 1
+#define HT_40_PROTECT 2
+#define HT_2040_PROTECT 3
+#define HT_RTSCTS_6M 7
+//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
+#define HT_ATHEROS 8
+#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
+
+//
+// RX Packet Filter control flags. Apply on pAd->PacketFilter
+//
+#define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED
+#define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST
+#define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST
+#define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST
+
+//
+// Error code section
+//
+// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
+#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L
+#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L
+#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L
+
+// NDIS_ERROR_CODE_ADAPTER_DISABLED
+#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L
+
+// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
+#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L
+#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L
+
+// NDIS_ERROR_CODE_OUT_OF_RESOURCES
+#define ERRLOG_OUT_OF_MEMORY 0x00000401L
+#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L
+#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L
+#define ERRLOG_OUT_OF_BUFFER_POOL 0x00000404L
+#define ERRLOG_OUT_OF_NDIS_BUFFER 0x00000405L
+#define ERRLOG_OUT_OF_PACKET_POOL 0x00000406L
+#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L
+#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L
+
+// NDIS_ERROR_CODE_HARDWARE_FAILURE
+#define ERRLOG_SELFTEST_FAILED 0x00000501L
+#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L
+#define ERRLOG_REMOVE_MINIPORT 0x00000503L
+
+// NDIS_ERROR_CODE_RESOURCE_CONFLICT
+#define ERRLOG_MAP_IO_SPACE 0x00000601L
+#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L
+#define ERRLOG_NO_IO_RESOURCE 0x00000603L
+#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L
+#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L
+
+
+// WDS definition
+#define MAX_WDS_ENTRY 4
+#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+
+#define WDS_DISABLE_MODE 0
+#define WDS_RESTRICT_MODE 1
+#define WDS_BRIDGE_MODE 2
+#define WDS_REPEATER_MODE 3
+#define WDS_LAZY_MODE 4
+
+
+#define MAX_MESH_NUM 0
+
+#define MAX_APCLI_NUM 0
+
+#define MAX_MBSSID_NUM 1
+#ifdef MBSS_SUPPORT
+#undef MAX_MBSSID_NUM
+#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
+#endif // MBSS_SUPPORT //
+
+/* sanity check for apidx */
+#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
+ { if (apidx > MAX_MBSSID_NUM) { \
+ printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __FUNCTION__, apidx); \
+ apidx = MAIN_MBSSID; } }
+
+#define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
+
+#define MAIN_MBSSID 0
+#define FIRST_MBSSID 1
+
+
+#define MAX_BEACON_SIZE 512
+// If the MAX_MBSSID_NUM is larger than 6,
+// it shall reserve some WCID space(wcid 222~253) for beacon frames.
+// - these wcid 238~253 are reserved for beacon#6(ra6).
+// - these wcid 222~237 are reserved for beacon#7(ra7).
+#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
+#define HW_RESERVED_WCID 222
+#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
+#define HW_RESERVED_WCID 238
+#else
+#define HW_RESERVED_WCID 255
+#endif
+
+// Then dedicate wcid of DFS and Carrier-Sense.
+#define DFS_CTS_WCID (HW_RESERVED_WCID - 1)
+#define CS_CTS_WCID (HW_RESERVED_WCID - 2)
+#define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2)
+
+// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
+// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
+#define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
+
+// TX need WCID to find Cipher Key
+// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
+#define GET_GroupKey_WCID(__wcid, __bssidx) \
+ { \
+ __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \
+ }
+
+#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
+
+
+// definition to support multiple BSSID
+#define BSS0 0
+#define BSS1 1
+#define BSS2 2
+#define BSS3 3
+#define BSS4 4
+#define BSS5 5
+#define BSS6 6
+#define BSS7 7
+
+
+//============================================================
+// Length definitions
+#define PEER_KEY_NO 2
+#define MAC_ADDR_LEN 6
+#define TIMESTAMP_LEN 8
+#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA
+#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_LEN_OF_SSID 32
+#define CIPHER_TEXT_LEN 128
+#define HASH_TABLE_SIZE 256
+#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes.
+#define MAX_SUPPORT_MCS 32
+
+//============================================================
+// ASIC WCID Table definition.
+//============================================================
+#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID
+#define MCAST_WCID 0x0
+#define BSS0Mcast_WCID 0x0
+#define BSS1Mcast_WCID 0xf8
+#define BSS2Mcast_WCID 0xf9
+#define BSS3Mcast_WCID 0xfa
+#define BSS4Mcast_WCID 0xfb
+#define BSS5Mcast_WCID 0xfc
+#define BSS6Mcast_WCID 0xfd
+#define BSS7Mcast_WCID 0xfe
+#define RESERVED_WCID 0xff
+
+#define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL
+
+#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+
+#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
+#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
+#endif
+
+#define MAX_NUM_OF_WDS_LINK_PERBSSID 3
+#define MAX_NUM_OF_WDS_LINK (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
+#define MAX_NUM_OF_EVENT MAX_NUMBER_OF_EVENT
+#define WDS_LINK_START_WCID (MAX_LEN_OF_MAC_TABLE-1)
+
+#define NUM_OF_TID 8
+#define MAX_AID_BA 4
+#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient
+#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator
+#define MAX_LEN_OF_BSS_TABLE 64
+#define MAX_REORDERING_MPDU_NUM 512
+
+// key related definitions
+#define SHARE_KEY_NUM 4
+#define MAX_LEN_OF_SHARE_KEY 16 // byte count
+#define MAX_LEN_OF_PEER_KEY 16 // byte count
+#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table
+#define GROUP_KEY_NUM 4
+#define PMK_LEN 32
+#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define PMKID_NO 4 // Number of PMKID saved supported
+#define MAX_LEN_OF_MLME_BUFFER 2048
+
+// power status related definitions
+#define PWR_ACTIVE 0
+#define PWR_SAVE 1
+#define PWR_MMPS 2 //MIMO power save
+//#define PWR_UNKNOWN 2
+
+// Auth and Assoc mode related definitions
+#define AUTH_MODE_OPEN 0x00
+#define AUTH_MODE_KEY 0x01
+//#define AUTH_MODE_AUTO_SWITCH 0x03
+//#define AUTH_MODE_DEAUTH 0x04
+//#define AUTH_MODE_UPLAYER 0x05 // reserved for 802.11i use
+
+// BSS Type definitions
+#define BSS_ADHOC 0 // = Ndis802_11IBSS
+#define BSS_INFRA 1 // = Ndis802_11Infrastructure
+#define BSS_ANY 2 // = Ndis802_11AutoUnknown
+#define BSS_MONITOR 3 // = Ndis802_11Monitor
+
+
+// Reason code definitions
+#define REASON_RESERVED 0
+#define REASON_UNSPECIFY 1
+#define REASON_NO_LONGER_VALID 2
+#define REASON_DEAUTH_STA_LEAVING 3
+#define REASON_DISASSOC_INACTIVE 4
+#define REASON_DISASSPC_AP_UNABLE 5
+#define REASON_CLS2ERR 6
+#define REASON_CLS3ERR 7
+#define REASON_DISASSOC_STA_LEAVING 8
+#define REASON_STA_REQ_ASSOC_NOT_AUTH 9
+#define REASON_INVALID_IE 13
+#define REASON_MIC_FAILURE 14
+#define REASON_4_WAY_TIMEOUT 15
+#define REASON_GROUP_KEY_HS_TIMEOUT 16
+#define REASON_IE_DIFFERENT 17
+#define REASON_MCIPHER_NOT_VALID 18
+#define REASON_UCIPHER_NOT_VALID 19
+#define REASON_AKMP_NOT_VALID 20
+#define REASON_UNSUPPORT_RSNE_VER 21
+#define REASON_INVALID_RSNE_CAP 22
+#define REASON_8021X_AUTH_FAIL 23
+#define REASON_CIPHER_SUITE_REJECTED 24
+#define REASON_DECLINED 37
+
+#define REASON_QOS_UNSPECIFY 32
+#define REASON_QOS_LACK_BANDWIDTH 33
+#define REASON_POOR_CHANNEL_CONDITION 34
+#define REASON_QOS_OUTSIDE_TXOP_LIMITION 35
+#define REASON_QOS_QSTA_LEAVING_QBSS 36
+#define REASON_QOS_UNWANTED_MECHANISM 37
+#define REASON_QOS_MECH_SETUP_REQUIRED 38
+#define REASON_QOS_REQUEST_TIMEOUT 39
+#define REASON_QOS_CIPHER_NOT_SUPPORT 45
+
+// Status code definitions
+#define MLME_SUCCESS 0
+#define MLME_UNSPECIFY_FAIL 1
+#define MLME_CANNOT_SUPPORT_CAP 10
+#define MLME_REASSOC_DENY_ASSOC_EXIST 11
+#define MLME_ASSOC_DENY_OUT_SCOPE 12
+#define MLME_ALG_NOT_SUPPORT 13
+#define MLME_SEQ_NR_OUT_OF_SEQUENCE 14
+#define MLME_REJ_CHALLENGE_FAILURE 15
+#define MLME_REJ_TIMEOUT 16
+#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA 17
+#define MLME_ASSOC_REJ_DATA_RATE 18
+
+#define MLME_ASSOC_REJ_NO_EXT_RATE 22
+#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC 23
+#define MLME_ASSOC_REJ_NO_CCK_OFDM 24
+
+#define MLME_QOS_UNSPECIFY 32
+#define MLME_REQUEST_DECLINED 37
+#define MLME_REQUEST_WITH_INVALID_PARAM 38
+#define MLME_DLS_NOT_ALLOW_IN_QBSS 48
+#define MLME_DEST_STA_NOT_IN_QBSS 49
+#define MLME_DEST_STA_IS_NOT_A_QSTA 50
+
+#define MLME_INVALID_FORMAT 0x51
+#define MLME_FAIL_NO_RESOURCE 0x52
+#define MLME_STATE_MACHINE_REJECT 0x53
+#define MLME_MAC_TABLE_FAIL 0x54
+
+// IE code
+#define IE_SSID 0
+#define IE_SUPP_RATES 1
+#define IE_FH_PARM 2
+#define IE_DS_PARM 3
+#define IE_CF_PARM 4
+#define IE_TIM 5
+#define IE_IBSS_PARM 6
+#define IE_COUNTRY 7 // 802.11d
+#define IE_802_11D_REQUEST 10 // 802.11d
+#define IE_QBSS_LOAD 11 // 802.11e d9
+#define IE_EDCA_PARAMETER 12 // 802.11e d9
+#define IE_TSPEC 13 // 802.11e d9
+#define IE_TCLAS 14 // 802.11e d9
+#define IE_SCHEDULE 15 // 802.11e d9
+#define IE_CHALLENGE_TEXT 16
+#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3
+#define IE_POWER_CAPABILITY 33 // 802.11h d3.3
+#define IE_TPC_REQUEST 34 // 802.11h d3.3
+#define IE_TPC_REPORT 35 // 802.11h d3.3
+#define IE_SUPP_CHANNELS 36 // 802.11h d3.3
+#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3
+#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3
+#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3
+#define IE_QUIET 40 // 802.11h d3.3
+#define IE_IBSS_DFS 41 // 802.11h d3.3
+#define IE_ERP 42 // 802.11g
+#define IE_TS_DELAY 43 // 802.11e d9
+#define IE_TCLAS_PROCESSING 44 // 802.11e d9
+#define IE_QOS_CAPABILITY 46 // 802.11e d6
+#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
+#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6
+#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
+#define IE_RSN 48 // 802.11i d3.0
+#define IE_WPA2 48 // WPA2
+#define IE_EXT_SUPP_RATES 50 // 802.11g
+#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes.
+#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n
+#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
+#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
+
+
+// For 802.11n D3.03
+//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
+#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
+#define IE_WAPI 68 // WAPI information element
+#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
+#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
+#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
+#define IE_EXT_CAPABILITY 127 // 802.11n D3.03
+
+
+#define IE_WPA 221 // WPA
+#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME)
+
+#define OUI_BROADCOM_HT 51 //
+#define OUI_BROADCOM_HTADD 52 //
+#define OUI_PREN_HT_CAP 51 //
+#define OUI_PREN_ADD_HT 52 //
+
+// CCX information
+#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP
+#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power
+#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0
+#define IE_CCX_V2 221
+#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address
+#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element
+#define CKIP_NEGOTIATION_LENGTH 30
+#define AIRONET_IPADDRESS_LENGTH 10
+#define AIRONET_CCKMREASSOC_LENGTH 24
+
+// ========================================================
+// MLME state machine definition
+// ========================================================
+
+// STA MLME state mahcines
+#define ASSOC_STATE_MACHINE 1
+#define AUTH_STATE_MACHINE 2
+#define AUTH_RSP_STATE_MACHINE 3
+#define SYNC_STATE_MACHINE 4
+#define MLME_CNTL_STATE_MACHINE 5
+#define WPA_PSK_STATE_MACHINE 6
+#define LEAP_STATE_MACHINE 7
+#define AIRONET_STATE_MACHINE 8
+#define ACTION_STATE_MACHINE 9
+
+// AP MLME state machines
+#define AP_ASSOC_STATE_MACHINE 11
+#define AP_AUTH_STATE_MACHINE 12
+#define AP_AUTH_RSP_STATE_MACHINE 13
+#define AP_SYNC_STATE_MACHINE 14
+#define AP_CNTL_STATE_MACHINE 15
+#define AP_WPA_STATE_MACHINE 16
+
+#define WSC_STATE_MACHINE 17
+#define WSC_UPNP_STATE_MACHINE 18
+
+
+
+#ifdef QOS_DLS_SUPPORT
+#define DLS_STATE_MACHINE 26
+#endif // QOS_DLS_SUPPORT //
+
+//
+// STA's CONTROL/CONNECT state machine: states, events, total function #
+//
+#define CNTL_IDLE 0
+#define CNTL_WAIT_DISASSOC 1
+#define CNTL_WAIT_JOIN 2
+#define CNTL_WAIT_REASSOC 3
+#define CNTL_WAIT_START 4
+#define CNTL_WAIT_AUTH 5
+#define CNTL_WAIT_ASSOC 6
+#define CNTL_WAIT_AUTH2 7
+#define CNTL_WAIT_OID_LIST_SCAN 8
+#define CNTL_WAIT_OID_DISASSOC 9
+#ifdef RT2870
+#define CNTL_WAIT_SCAN_FOR_CONNECT 10
+#endif // RT2870 //
+
+#define MT2_ASSOC_CONF 34
+#define MT2_AUTH_CONF 35
+#define MT2_DEAUTH_CONF 36
+#define MT2_DISASSOC_CONF 37
+#define MT2_REASSOC_CONF 38
+#define MT2_PWR_MGMT_CONF 39
+#define MT2_JOIN_CONF 40
+#define MT2_SCAN_CONF 41
+#define MT2_START_CONF 42
+#define MT2_GET_CONF 43
+#define MT2_SET_CONF 44
+#define MT2_RESET_CONF 45
+#define MT2_MLME_ROAMING_REQ 52
+
+#define CNTL_FUNC_SIZE 1
+
+//
+// STA's ASSOC state machine: states, events, total function #
+//
+#define ASSOC_IDLE 0
+#define ASSOC_WAIT_RSP 1
+#define REASSOC_WAIT_RSP 2
+#define DISASSOC_WAIT_RSP 3
+#define MAX_ASSOC_STATE 4
+
+#define ASSOC_MACHINE_BASE 0
+#define MT2_MLME_ASSOC_REQ 0
+#define MT2_MLME_REASSOC_REQ 1
+#define MT2_MLME_DISASSOC_REQ 2
+#define MT2_PEER_DISASSOC_REQ 3
+#define MT2_PEER_ASSOC_REQ 4
+#define MT2_PEER_ASSOC_RSP 5
+#define MT2_PEER_REASSOC_REQ 6
+#define MT2_PEER_REASSOC_RSP 7
+#define MT2_DISASSOC_TIMEOUT 8
+#define MT2_ASSOC_TIMEOUT 9
+#define MT2_REASSOC_TIMEOUT 10
+#define MAX_ASSOC_MSG 11
+
+#define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
+
+//
+// ACT state machine: states, events, total function #
+//
+#define ACT_IDLE 0
+#define MAX_ACT_STATE 1
+
+#define ACT_MACHINE_BASE 0
+
+//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
+//Category
+#define MT2_PEER_SPECTRUM_CATE 0
+#define MT2_PEER_QOS_CATE 1
+#define MT2_PEER_DLS_CATE 2
+#define MT2_PEER_BA_CATE 3
+#define MT2_PEER_PUBLIC_CATE 4
+#define MT2_PEER_RM_CATE 5
+#define MT2_PEER_HT_CATE 7 // 7.4.7
+#define MAX_PEER_CATE_MSG 7
+#define MT2_MLME_ADD_BA_CATE 8
+#define MT2_MLME_ORI_DELBA_CATE 9
+#define MT2_MLME_REC_DELBA_CATE 10
+#define MT2_MLME_QOS_CATE 11
+#define MT2_MLME_DLS_CATE 12
+#define MT2_ACT_INVALID 13
+#define MAX_ACT_MSG 14
+
+//Category field
+#define CATEGORY_SPECTRUM 0
+#define CATEGORY_QOS 1
+#define CATEGORY_DLS 2
+#define CATEGORY_BA 3
+#define CATEGORY_PUBLIC 4
+#define CATEGORY_RM 5
+#define CATEGORY_HT 7
+
+
+// DLS Action frame definition
+#define ACTION_DLS_REQUEST 0
+#define ACTION_DLS_RESPONSE 1
+#define ACTION_DLS_TEARDOWN 2
+
+//Spectrum Action field value 802.11h 7.4.1
+#define SPEC_MRQ 0 // Request
+#define SPEC_MRP 1 //Report
+#define SPEC_TPCRQ 2
+#define SPEC_TPCRP 3
+#define SPEC_CHANNEL_SWITCH 4
+
+
+//BA Action field value
+#define ADDBA_REQ 0
+#define ADDBA_RESP 1
+#define DELBA 2
+
+//Public's Action field value in Public Category. Some in 802.11y and some in 11n
+#define ACTION_BSS_2040_COEXIST 0 // 11n
+#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0
+#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0
+#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0
+#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0
+#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0
+#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0
+#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0
+#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0
+
+
+//HT Action field value
+#define NOTIFY_BW_ACTION 0
+#define SMPS_ACTION 1
+#define PSMP_ACTION 2
+#define SETPCO_ACTION 3
+#define MIMO_CHA_MEASURE_ACTION 4
+#define MIMO_N_BEACONFORM 5
+#define MIMO_BEACONFORM 6
+#define ANTENNA_SELECT 7
+#define HT_INFO_EXCHANGE 8
+
+#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
+//
+// STA's AUTHENTICATION state machine: states, evvents, total function #
+//
+#define AUTH_REQ_IDLE 0
+#define AUTH_WAIT_SEQ2 1
+#define AUTH_WAIT_SEQ4 2
+#define MAX_AUTH_STATE 3
+
+#define AUTH_MACHINE_BASE 0
+#define MT2_MLME_AUTH_REQ 0
+#define MT2_PEER_AUTH_EVEN 1
+#define MT2_AUTH_TIMEOUT 2
+#define MAX_AUTH_MSG 3
+
+#define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG)
+
+//
+// STA's AUTH_RSP state machine: states, events, total function #
+//
+#define AUTH_RSP_IDLE 0
+#define AUTH_RSP_WAIT_CHAL 1
+#define MAX_AUTH_RSP_STATE 2
+
+#define AUTH_RSP_MACHINE_BASE 0
+#define MT2_AUTH_CHALLENGE_TIMEOUT 0
+#define MT2_PEER_AUTH_ODD 1
+#define MT2_PEER_DEAUTH 2
+#define MAX_AUTH_RSP_MSG 3
+
+#define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
+
+//
+// STA's SYNC state machine: states, events, total function #
+//
+#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
+#define JOIN_WAIT_BEACON 1
+#define SCAN_LISTEN 2
+#define MAX_SYNC_STATE 3
+
+#define SYNC_MACHINE_BASE 0
+#define MT2_MLME_SCAN_REQ 0
+#define MT2_MLME_JOIN_REQ 1
+#define MT2_MLME_START_REQ 2
+#define MT2_PEER_BEACON 3
+#define MT2_PEER_PROBE_RSP 4
+#define MT2_PEER_ATIM 5
+#define MT2_SCAN_TIMEOUT 6
+#define MT2_BEACON_TIMEOUT 7
+#define MT2_ATIM_TIMEOUT 8
+#define MT2_PEER_PROBE_REQ 9
+#define MAX_SYNC_MSG 10
+
+#define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG)
+
+//Messages for the DLS state machine
+#define DLS_IDLE 0
+#define MAX_DLS_STATE 1
+
+#define DLS_MACHINE_BASE 0
+#define MT2_MLME_DLS_REQ 0
+#define MT2_PEER_DLS_REQ 1
+#define MT2_PEER_DLS_RSP 2
+#define MT2_MLME_DLS_TEAR_DOWN 3
+#define MT2_PEER_DLS_TEAR_DOWN 4
+#define MAX_DLS_MSG 5
+
+#define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG)
+
+//
+// STA's WPA-PSK State machine: states, events, total function #
+//
+#define WPA_PSK_IDLE 0
+#define MAX_WPA_PSK_STATE 1
+
+#define WPA_MACHINE_BASE 0
+#define MT2_EAPPacket 0
+#define MT2_EAPOLStart 1
+#define MT2_EAPOLLogoff 2
+#define MT2_EAPOLKey 3
+#define MT2_EAPOLASFAlert 4
+#define MAX_WPA_PSK_MSG 5
+
+#define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
+
+//
+// STA's CISCO-AIRONET State machine: states, events, total function #
+//
+#define AIRONET_IDLE 0
+#define AIRONET_SCANNING 1
+#define MAX_AIRONET_STATE 2
+
+#define AIRONET_MACHINE_BASE 0
+#define MT2_AIRONET_MSG 0
+#define MT2_AIRONET_SCAN_REQ 1
+#define MT2_AIRONET_SCAN_DONE 2
+#define MAX_AIRONET_MSG 3
+
+#define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG)
+
+//
+// WSC State machine: states, events, total function #
+//
+
+//
+// AP's CONTROL/CONNECT state machine: states, events, total function #
+//
+#define AP_CNTL_FUNC_SIZE 1
+
+//
+// AP's ASSOC state machine: states, events, total function #
+//
+#define AP_ASSOC_IDLE 0
+#define AP_MAX_ASSOC_STATE 1
+
+#define AP_ASSOC_MACHINE_BASE 0
+#define APMT2_MLME_DISASSOC_REQ 0
+#define APMT2_PEER_DISASSOC_REQ 1
+#define APMT2_PEER_ASSOC_REQ 2
+#define APMT2_PEER_REASSOC_REQ 3
+#define APMT2_CLS3ERR 4
+#define AP_MAX_ASSOC_MSG 5
+
+#define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
+
+//
+// AP's AUTHENTICATION state machine: states, events, total function #
+//
+#define AP_AUTH_REQ_IDLE 0
+#define AP_MAX_AUTH_STATE 1
+
+#define AP_AUTH_MACHINE_BASE 0
+#define APMT2_MLME_DEAUTH_REQ 0
+#define APMT2_CLS2ERR 1
+#define AP_MAX_AUTH_MSG 2
+
+#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
+
+//
+// AP's AUTH-RSP state machine: states, events, total function #
+//
+#define AP_AUTH_RSP_IDLE 0
+#define AP_MAX_AUTH_RSP_STATE 1
+
+#define AP_AUTH_RSP_MACHINE_BASE 0
+#define APMT2_AUTH_CHALLENGE_TIMEOUT 0
+#define APMT2_PEER_AUTH_ODD 1
+#define APMT2_PEER_DEAUTH 2
+#define AP_MAX_AUTH_RSP_MSG 3
+
+#define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
+
+//
+// AP's SYNC state machine: states, events, total function #
+//
+#define AP_SYNC_IDLE 0
+#define AP_SCAN_LISTEN 1
+#define AP_MAX_SYNC_STATE 2
+
+#define AP_SYNC_MACHINE_BASE 0
+#define APMT2_PEER_PROBE_REQ 0
+#define APMT2_PEER_BEACON 1
+#define APMT2_MLME_SCAN_REQ 2
+#define APMT2_PEER_PROBE_RSP 3
+#define APMT2_SCAN_TIMEOUT 4
+#define APMT2_MLME_SCAN_CNCL 5
+#define AP_MAX_SYNC_MSG 6
+
+#define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
+
+//
+// AP's WPA state machine: states, events, total function #
+//
+#define AP_WPA_PTK 0
+#define AP_MAX_WPA_PTK_STATE 1
+
+#define AP_WPA_MACHINE_BASE 0
+#define APMT2_EAPPacket 0
+#define APMT2_EAPOLStart 1
+#define APMT2_EAPOLLogoff 2
+#define APMT2_EAPOLKey 3
+#define APMT2_EAPOLASFAlert 4
+#define AP_MAX_WPA_MSG 5
+
+#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
+
+
+
+// =============================================================================
+
+// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
+#define BTYPE_MGMT 0
+#define BTYPE_CNTL 1
+#define BTYPE_DATA 2
+
+// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+#define SUBTYPE_ASSOC_REQ 0
+#define SUBTYPE_ASSOC_RSP 1
+#define SUBTYPE_REASSOC_REQ 2
+#define SUBTYPE_REASSOC_RSP 3
+#define SUBTYPE_PROBE_REQ 4
+#define SUBTYPE_PROBE_RSP 5
+#define SUBTYPE_BEACON 8
+#define SUBTYPE_ATIM 9
+#define SUBTYPE_DISASSOC 10
+#define SUBTYPE_AUTH 11
+#define SUBTYPE_DEAUTH 12
+#define SUBTYPE_ACTION 13
+#define SUBTYPE_ACTION_NO_ACK 14
+
+// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+#define SUBTYPE_WRAPPER 7
+#define SUBTYPE_BLOCK_ACK_REQ 8
+#define SUBTYPE_BLOCK_ACK 9
+#define SUBTYPE_PS_POLL 10
+#define SUBTYPE_RTS 11
+#define SUBTYPE_CTS 12
+#define SUBTYPE_ACK 13
+#define SUBTYPE_CFEND 14
+#define SUBTYPE_CFEND_CFACK 15
+
+// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+#define SUBTYPE_DATA 0
+#define SUBTYPE_DATA_CFACK 1
+#define SUBTYPE_DATA_CFPOLL 2
+#define SUBTYPE_DATA_CFACK_CFPOLL 3
+#define SUBTYPE_NULL_FUNC 4
+#define SUBTYPE_CFACK 5
+#define SUBTYPE_CFPOLL 6
+#define SUBTYPE_CFACK_CFPOLL 7
+#define SUBTYPE_QDATA 8
+#define SUBTYPE_QDATA_CFACK 9
+#define SUBTYPE_QDATA_CFPOLL 10
+#define SUBTYPE_QDATA_CFACK_CFPOLL 11
+#define SUBTYPE_QOS_NULL 12
+#define SUBTYPE_QOS_CFACK 13
+#define SUBTYPE_QOS_CFPOLL 14
+#define SUBTYPE_QOS_CFACK_CFPOLL 15
+
+// ACK policy of QOS Control field bit 6:5
+#define NORMAL_ACK 0x00 // b6:5 = 00
+#define NO_ACK 0x20 // b6:5 = 01
+#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10
+#define BLOCK_ACK 0x60 // b6:5 = 11
+
+//
+// rtmp_data.c use these definition
+//
+#define LENGTH_802_11 24
+#define LENGTH_802_11_AND_H 30
+#define LENGTH_802_11_CRC_H 34
+#define LENGTH_802_11_CRC 28
+#define LENGTH_802_11_WITH_ADDR4 30
+#define LENGTH_802_3 14
+#define LENGTH_802_3_TYPE 2
+#define LENGTH_802_1_H 8
+#define LENGTH_EAPOL_H 4
+#define LENGTH_WMMQOS_H 2
+#define LENGTH_CRC 4
+#define MAX_SEQ_NUMBER 0x0fff
+#define LENGTH_802_3_NO_TYPE 12
+#define LENGTH_802_1Q 4 /* VLAN related */
+
+// STA_CSR4.field.TxResult
+#define TX_RESULT_SUCCESS 0
+#define TX_RESULT_ZERO_LENGTH 1
+#define TX_RESULT_UNDER_RUN 2
+#define TX_RESULT_OHY_ERROR 4
+#define TX_RESULT_RETRY_FAIL 6
+
+// All PHY rate summary in TXD
+// Preamble MODE in TxD
+#define MODE_CCK 0
+#define MODE_OFDM 1
+#ifdef DOT11_N_SUPPORT
+#define MODE_HTMIX 2
+#define MODE_HTGREENFIELD 3
+#endif // DOT11_N_SUPPORT //
+// MCS for CCK. BW.SGI.STBC are reserved
+#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
+#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
+#define MCS_LONGP_RATE_5_5 2
+#define MCS_LONGP_RATE_11 3
+#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
+#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps
+#define MCS_SHORTP_RATE_5_5 6
+#define MCS_SHORTP_RATE_11 7
+// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved
+#define MCS_RATE_6 0 // legacy OFDM
+#define MCS_RATE_9 1 // OFDM
+#define MCS_RATE_12 2 // OFDM
+#define MCS_RATE_18 3 // OFDM
+#define MCS_RATE_24 4 // OFDM
+#define MCS_RATE_36 5 // OFDM
+#define MCS_RATE_48 6 // OFDM
+#define MCS_RATE_54 7 // OFDM
+// HT
+#define MCS_0 0 // 1S
+#define MCS_1 1
+#define MCS_2 2
+#define MCS_3 3
+#define MCS_4 4
+#define MCS_5 5
+#define MCS_6 6
+#define MCS_7 7
+#define MCS_8 8 // 2S
+#define MCS_9 9
+#define MCS_10 10
+#define MCS_11 11
+#define MCS_12 12
+#define MCS_13 13
+#define MCS_14 14
+#define MCS_15 15
+#define MCS_16 16 // 3*3
+#define MCS_17 17
+#define MCS_18 18
+#define MCS_19 19
+#define MCS_20 20
+#define MCS_21 21
+#define MCS_22 22
+#define MCS_23 23
+#define MCS_32 32
+#define MCS_AUTO 33
+
+#ifdef DOT11_N_SUPPORT
+// OID_HTPHYMODE
+// MODE
+#define HTMODE_MM 0
+#define HTMODE_GF 1
+#endif // DOT11_N_SUPPORT //
+
+// Fixed Tx MODE - HT, CCK or OFDM
+#define FIXED_TXMODE_HT 0
+#define FIXED_TXMODE_CCK 1
+#define FIXED_TXMODE_OFDM 2
+// BW
+#define BW_20 BAND_WIDTH_20
+#define BW_40 BAND_WIDTH_40
+#define BW_BOTH BAND_WIDTH_BOTH
+#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
+
+#ifdef DOT11_N_SUPPORT
+// SHORTGI
+#define GI_400 GAP_INTERVAL_400 // only support in HT mode
+#define GI_BOTH GAP_INTERVAL_BOTH
+#endif // DOT11_N_SUPPORT //
+#define GI_800 GAP_INTERVAL_800
+// STBC
+#define STBC_NONE 0
+#ifdef DOT11_N_SUPPORT
+#define STBC_USE 1 // limited use in rt2860b phy
+#define RXSTBC_ONE 1 // rx support of one spatial stream
+#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
+#define RXSTBC_THR 3 // rx support of 1~3 spatial stream
+// MCS FEEDBACK
+#define MCSFBK_NONE 0 // not support mcs feedback /
+#define MCSFBK_RSV 1 // reserved
+#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback
+#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback
+
+// MIMO power safe
+#define MMPS_STATIC 0
+#define MMPS_DYNAMIC 1
+#define MMPS_RSV 2
+#define MMPS_ENABLE 3
+
+
+// A-MSDU size
+#define AMSDU_0 0
+#define AMSDU_1 1
+
+#endif // DOT11_N_SUPPORT //
+
+// MCS use 7 bits
+#define TXRATEMIMO 0x80
+#define TXRATEMCS 0x7F
+#define TXRATEOFDM 0x7F
+#define RATE_1 0
+#define RATE_2 1
+#define RATE_5_5 2
+#define RATE_11 3
+#define RATE_6 4 // OFDM
+#define RATE_9 5 // OFDM
+#define RATE_12 6 // OFDM
+#define RATE_18 7 // OFDM
+#define RATE_24 8 // OFDM
+#define RATE_36 9 // OFDM
+#define RATE_48 10 // OFDM
+#define RATE_54 11 // OFDM
+#define RATE_FIRST_OFDM_RATE RATE_6
+#define RATE_LAST_OFDM_RATE RATE_54
+#define RATE_6_5 12 // HT mix
+#define RATE_13 13 // HT mix
+#define RATE_19_5 14 // HT mix
+#define RATE_26 15 // HT mix
+#define RATE_39 16 // HT mix
+#define RATE_52 17 // HT mix
+#define RATE_58_5 18 // HT mix
+#define RATE_65 19 // HT mix
+#define RATE_78 20 // HT mix
+#define RATE_104 21 // HT mix
+#define RATE_117 22 // HT mix
+#define RATE_130 23 // HT mix
+//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only
+#define HTRATE_0 12
+#define RATE_FIRST_MM_RATE HTRATE_0
+#define RATE_FIRST_HT_RATE HTRATE_0
+#define RATE_LAST_HT_RATE HTRATE_0
+
+// pTxWI->txop
+#define IFS_HTTXOP 0 // The txop will be handles by ASIC.
+#define IFS_PIFS 1
+#define IFS_SIFS 2
+#define IFS_BACKOFF 3
+
+// pTxD->RetryMode
+#define LONG_RETRY 1
+#define SHORT_RETRY 0
+
+// Country Region definition
+#define REGION_MINIMUM_BG_BAND 0
+#define REGION_0_BG_BAND 0 // 1-11
+#define REGION_1_BG_BAND 1 // 1-13
+#define REGION_2_BG_BAND 2 // 10-11
+#define REGION_3_BG_BAND 3 // 10-13
+#define REGION_4_BG_BAND 4 // 14
+#define REGION_5_BG_BAND 5 // 1-14
+#define REGION_6_BG_BAND 6 // 3-9
+#define REGION_7_BG_BAND 7 // 5-13
+#define REGION_31_BG_BAND 31 // 5-13
+#define REGION_MAXIMUM_BG_BAND 7
+
+#define REGION_MINIMUM_A_BAND 0
+#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
+#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64
+#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161
+#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165
+#define REGION_5_A_BAND 5 // 149, 153, 157, 161
+#define REGION_6_A_BAND 6 // 36, 40, 44, 48
+#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
+#define REGION_8_A_BAND 8 // 52, 56, 60, 64
+#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
+#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165
+#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
+#define REGION_MAXIMUM_A_BAND 11
+
+// pTxD->CipherAlg
+#define CIPHER_NONE 0
+#define CIPHER_WEP64 1
+#define CIPHER_WEP128 2
+#define CIPHER_TKIP 3
+#define CIPHER_AES 4
+#define CIPHER_CKIP64 5
+#define CIPHER_CKIP128 6
+#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
+#define CIPHER_SMS4 8
+
+// value domain of pAd->RfIcType
+#define RFIC_2820 1 // 2.4G 2T3R
+#define RFIC_2850 2 // 2.4G/5G 2T3R
+#define RFIC_2720 3 // 2.4G 1T2R
+#define RFIC_2750 4 // 2.4G/5G 1T2R
+#define RFIC_3020 5 // 2.4G 1T1R
+#define RFIC_2020 6 // 2.4G B/G
+#define RFIC_3021 7 // 2.4G 1T2R
+#define RFIC_3022 8 // 2.4G 2T2R
+
+// LED Status.
+#define LED_LINK_DOWN 0
+#define LED_LINK_UP 1
+#define LED_RADIO_OFF 2
+#define LED_RADIO_ON 3
+#define LED_HALT 4
+#define LED_WPS 5
+#define LED_ON_SITE_SURVEY 6
+#define LED_POWER_UP 7
+
+// value domain of pAd->LedCntl.LedMode and E2PROM
+#define LED_MODE_DEFAULT 0
+#define LED_MODE_TWO_LED 1
+#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8
+
+// RC4 init value, used fro WEP & TKIP
+#define PPPINITFCS32 0xffffffff /* Initial FCS value */
+
+// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
+#define WPA_802_1X_PORT_SECURED 1
+#define WPA_802_1X_PORT_NOT_SECURED 2
+
+#define PAIRWISE_KEY 1
+#define GROUP_KEY 2
+
+//definition of DRS
+#define MAX_STEP_OF_TX_RATE_SWITCH 32
+
+
+// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
+#define MAX_NUM_OF_FREE_NDIS_PACKET 128
+
+//Block ACK
+#define MAX_TX_REORDERBUF 64
+#define MAX_RX_REORDERBUF 64
+#define DEFAULT_TX_TIMEOUT 30
+#define DEFAULT_RX_TIMEOUT 30
+
+// definition of Recipient or Originator
+#define I_RECIPIENT TRUE
+#define I_ORIGINATOR FALSE
+
+#define DEFAULT_BBP_TX_POWER 0
+#define DEFAULT_RF_TX_POWER 5
+
+#define MAX_INI_BUFFER_SIZE 4096
+#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64)
+ //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
+ //64 : MAX_NUM_OF_ACL_LIST
+// definition of pAd->OpMode
+#define OPMODE_STA 0
+#define OPMODE_AP 1
+//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
+
+#ifdef RT_BIG_ENDIAN
+#define DIR_READ 0
+#define DIR_WRITE 1
+#define TYPE_TXD 0
+#define TYPE_RXD 1
+#define TYPE_TXINFO 0
+#define TYPE_RXINFO 1
+#define TYPE_TXWI 0
+#define TYPE_RXWI 1
+#endif
+
+// ========================= AP rtmp_def.h ===========================
+// value domain for pAd->EventTab.Log[].Event
+#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
+#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated"
+#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS"
+#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
+#define EVENT_COUNTER_M 4
+#define EVENT_INVALID_PSK 5
+#define EVENT_MAX_EVENT_TYPE 6
+// ==== end of AP rtmp_def.h ============
+
+// definition RSSI Number
+#define RSSI_0 0
+#define RSSI_1 1
+#define RSSI_2 2
+
+// definition of radar detection
+#define RD_NORMAL_MODE 0 // Not found radar signal
+#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch
+#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found
+
+//Driver defined cid for mapping status and command.
+#define SLEEPCID 0x11
+#define WAKECID 0x22
+#define QUERYPOWERCID 0x33
+#define OWNERMCU 0x1
+#define OWNERCPU 0x0
+
+// MBSSID definition
+#define ENTRY_NOT_FOUND 0xFF
+
+
+/* After Linux 2.6.9,
+ * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
+ * #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h
+ * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
+ *
+ * For this reason, we MUST use EVEN value in priv_flags
+ */
+#define INT_MAIN 0x0100
+#define INT_MBSSID 0x0200
+#define INT_WDS 0x0300
+#define INT_APCLI 0x0400
+#define INT_MESH 0x0500
+
+// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
+#ifdef RALINK_ATE
+#define ATE_START 0x00 // Start ATE
+#define ATE_STOP 0x80 // Stop ATE
+#define ATE_TXCONT 0x05 // Continuous Transmit
+#define ATE_TXCARR 0x09 // Transmit Carrier
+#define ATE_TXCARRSUPP 0x11 // Transmit Carrier Suppression
+#define ATE_TXFRAME 0x01 // Transmit Frames
+#define ATE_RXFRAME 0x02 // Receive Frames
+#ifdef RALINK_28xx_QA
+#define ATE_TXSTOP 0xe2 // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
+#define ATE_RXSTOP 0xfd // Stop receiving Frames
+#define BBP22_TXFRAME 0x00 // Transmit Frames
+#define BBP22_TXCONT_OR_CARRSUPP 0x80 // Continuous Transmit or Carrier Suppression
+#define BBP22_TXCARR 0xc1 // Transmit Carrier
+#define BBP24_TXCONT 0x00 // Continuous Transmit
+#define BBP24_CARRSUPP 0x01 // Carrier Suppression
+#endif // RALINK_28xx_QA //
+#endif // RALINK_ATE //
+
+// WEP Key TYPE
+#define WEP_HEXADECIMAL_TYPE 0
+#define WEP_ASCII_TYPE 1
+
+
+
+// WIRELESS EVENTS definition
+/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
+#define IW_CUSTOM_MAX_LEN 255 /* In bytes */
+
+// For system event - start
+#define IW_SYS_EVENT_FLAG_START 0x0200
+#define IW_ASSOC_EVENT_FLAG 0x0200
+#define IW_DISASSOC_EVENT_FLAG 0x0201
+#define IW_DEAUTH_EVENT_FLAG 0x0202
+#define IW_AGEOUT_EVENT_FLAG 0x0203
+#define IW_COUNTER_MEASURES_EVENT_FLAG 0x0204
+#define IW_REPLAY_COUNTER_DIFF_EVENT_FLAG 0x0205
+#define IW_RSNIE_DIFF_EVENT_FLAG 0x0206
+#define IW_MIC_DIFF_EVENT_FLAG 0x0207
+#define IW_ICV_ERROR_EVENT_FLAG 0x0208
+#define IW_MIC_ERROR_EVENT_FLAG 0x0209
+#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG 0x020A
+#define IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG 0x020B
+#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG 0x020C
+#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG 0x020D
+#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG 0x020E
+#define IW_STA_LINKUP_EVENT_FLAG 0x020F
+#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
+#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
+#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
+// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
+#define IW_SYS_EVENT_FLAG_END 0x0212
+#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
+// For system event - end
+
+// For spoof attack event - start
+#define IW_SPOOF_EVENT_FLAG_START 0x0300
+#define IW_CONFLICT_SSID_EVENT_FLAG 0x0300
+#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301
+#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG 0x0302
+#define IW_SPOOF_PROBE_RESP_EVENT_FLAG 0x0303
+#define IW_SPOOF_BEACON_EVENT_FLAG 0x0304
+#define IW_SPOOF_DISASSOC_EVENT_FLAG 0x0305
+#define IW_SPOOF_AUTH_EVENT_FLAG 0x0306
+#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
+#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
+#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
+// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
+#define IW_SPOOF_EVENT_FLAG_END 0x0309
+#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
+// For spoof attack event - end
+
+// For flooding attack event - start
+#define IW_FLOOD_EVENT_FLAG_START 0x0400
+#define IW_FLOOD_AUTH_EVENT_FLAG 0x0400
+#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401
+#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG 0x0402
+#define IW_FLOOD_PROBE_REQ_EVENT_FLAG 0x0403
+#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
+#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
+#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
+// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
+#define IW_FLOOD_EVENT_FLAG_END 0x0406
+#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
+// For flooding attack - end
+
+// End - WIRELESS EVENTS definition
+
+#ifdef CONFIG_STA_SUPPORT
+// definition for DLS, kathy
+#define MAX_NUM_OF_INIT_DLS_ENTRY 1
+#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
+
+//Block ACK , rt2860, kathy
+#define MAX_TX_REORDERBUF 64
+#define MAX_RX_REORDERBUF 64
+#define DEFAULT_TX_TIMEOUT 30
+#define DEFAULT_RX_TIMEOUT 30
+#ifndef CONFIG_AP_SUPPORT
+#define MAX_BARECI_SESSION 8
+#endif
+
+#ifndef IW_ESSID_MAX_SIZE
+/* Maximum size of the ESSID and pAd->nickname strings */
+#define IW_ESSID_MAX_SIZE 32
+#endif
+#endif // CONFIG_STA_SUPPORT //
+
+#ifdef MCAST_RATE_SPECIFIC
+#define MCAST_DISABLE 0
+#define MCAST_CCK 1
+#define MCAST_OFDM 2
+#define MCAST_HTMIX 3
+#endif // MCAST_RATE_SPECIFIC //
+
+// For AsicRadioOff/AsicRadioOn function
+#define DOT11POWERSAVE 0
+#define GUIRADIO_OFF 1
+#define RTMP_HALT 2
+#define GUI_IDLE_POWER_SAVE 3
+// --
+
+
+// definition for WpaSupport flag
+#define WPA_SUPPLICANT_DISABLE 0
+#define WPA_SUPPLICANT_ENABLE 1
+#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2
+
+// Endian byte swapping codes
+#define SWAP16(x) \
+ ((UINT16)( \
+ (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
+ (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
+
+#define SWAP32(x) \
+ ((UINT32)( \
+ (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
+ (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \
+ (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \
+ (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
+
+#define SWAP64(x) \
+ ((UINT64)( \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
+ (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
+
+#ifdef RT_BIG_ENDIAN
+
+#define cpu2le64(x) SWAP64((x))
+#define le2cpu64(x) SWAP64((x))
+#define cpu2le32(x) SWAP32((x))
+#define le2cpu32(x) SWAP32((x))
+#define cpu2le16(x) SWAP16((x))
+#define le2cpu16(x) SWAP16((x))
+#define cpu2be64(x) ((UINT64)(x))
+#define be2cpu64(x) ((UINT64)(x))
+#define cpu2be32(x) ((UINT32)(x))
+#define be2cpu32(x) ((UINT32)(x))
+#define cpu2be16(x) ((UINT16)(x))
+#define be2cpu16(x) ((UINT16)(x))
+
+#else // Little_Endian
+
+#define cpu2le64(x) ((UINT64)(x))
+#define le2cpu64(x) ((UINT64)(x))
+#define cpu2le32(x) ((UINT32)(x))
+#define le2cpu32(x) ((UINT32)(x))
+#define cpu2le16(x) ((UINT16)(x))
+#define le2cpu16(x) ((UINT16)(x))
+#define cpu2be64(x) SWAP64((x))
+#define be2cpu64(x) SWAP64((x))
+#define cpu2be32(x) SWAP32((x))
+#define be2cpu32(x) SWAP32((x))
+#define cpu2be16(x) SWAP16((x))
+#define be2cpu16(x) SWAP16((x))
+
+#endif // RT_BIG_ENDIAN
+
+#endif // __RTMP_DEF_H__
+
+
projects / linux-2.6-omap-h63xx.git / blobdiff