--- /dev/null
+/*
+ *************************************************************************
+ * Ralink Tech Inc.
+ * 5F., No.36, Taiyuan St., Jhubei City,
+ * Hsinchu County 302,
+ * Taiwan, R.O.C.
+ *
+ * (c) Copyright 2002-2007, Ralink Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * *
+ *************************************************************************
+*/
+
+#include "../rt_config.h"
+
+INT Show_SSID_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_WirelessMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_TxBurst_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_TxPreamble_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_TxPower_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_Channel_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_BGProtection_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_RTSThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_FragThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+#ifdef DOT11_N_SUPPORT
+INT Show_HtBw_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtMcs_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtGi_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtOpMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtExtcha_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtMpduDensity_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtBaWinSize_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtRdg_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtAmsdu_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_HtAutoBa_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+#endif // DOT11_N_SUPPORT //
+
+INT Show_CountryRegion_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_CountryRegionABand_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_CountryCode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+#ifdef AGGREGATION_SUPPORT
+INT Show_PktAggregate_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+#endif // AGGREGATION_SUPPORT //
+
+#ifdef WMM_SUPPORT
+INT Show_WmmCapable_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+#endif // WMM_SUPPORT //
+
+INT Show_IEEE80211H_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+#ifdef CONFIG_STA_SUPPORT
+INT Show_NetworkType_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+#endif // CONFIG_STA_SUPPORT //
+
+INT Show_AuthMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_EncrypType_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_DefaultKeyID_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_Key1_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_Key2_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_Key3_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_Key4_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+INT Show_WPAPSK_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf);
+
+static struct {
+ CHAR *name;
+ INT (*show_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
+} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = {
+ {"SSID", Show_SSID_Proc},
+ {"WirelessMode", Show_WirelessMode_Proc},
+ {"TxBurst", Show_TxBurst_Proc},
+ {"TxPreamble", Show_TxPreamble_Proc},
+ {"TxPower", Show_TxPower_Proc},
+ {"Channel", Show_Channel_Proc},
+ {"BGProtection", Show_BGProtection_Proc},
+ {"RTSThreshold", Show_RTSThreshold_Proc},
+ {"FragThreshold", Show_FragThreshold_Proc},
+#ifdef DOT11_N_SUPPORT
+ {"HtBw", Show_HtBw_Proc},
+ {"HtMcs", Show_HtMcs_Proc},
+ {"HtGi", Show_HtGi_Proc},
+ {"HtOpMode", Show_HtOpMode_Proc},
+ {"HtExtcha", Show_HtExtcha_Proc},
+ {"HtMpduDensity", Show_HtMpduDensity_Proc},
+ {"HtBaWinSize", Show_HtBaWinSize_Proc},
+ {"HtRdg", Show_HtRdg_Proc},
+ {"HtAmsdu", Show_HtAmsdu_Proc},
+ {"HtAutoBa", Show_HtAutoBa_Proc},
+#endif // DOT11_N_SUPPORT //
+ {"CountryRegion", Show_CountryRegion_Proc},
+ {"CountryRegionABand", Show_CountryRegionABand_Proc},
+ {"CountryCode", Show_CountryCode_Proc},
+#ifdef AGGREGATION_SUPPORT
+ {"PktAggregate", Show_PktAggregate_Proc},
+#endif
+
+#ifdef WMM_SUPPORT
+ {"WmmCapable", Show_WmmCapable_Proc},
+#endif
+ {"IEEE80211H", Show_IEEE80211H_Proc},
+#ifdef CONFIG_STA_SUPPORT
+ {"NetworkType", Show_NetworkType_Proc},
+#endif // CONFIG_STA_SUPPORT //
+ {"AuthMode", Show_AuthMode_Proc},
+ {"EncrypType", Show_EncrypType_Proc},
+ {"DefaultKeyID", Show_DefaultKeyID_Proc},
+ {"Key1", Show_Key1_Proc},
+ {"Key2", Show_Key2_Proc},
+ {"Key3", Show_Key3_Proc},
+ {"Key4", Show_Key4_Proc},
+ {"WPAPSK", Show_WPAPSK_Proc},
+ {NULL, NULL}
+};
+
+/*
+ ==========================================================================
+ Description:
+ Get Driver version.
+
+ Return:
+ ==========================================================================
+*/
+INT Set_DriverVersion_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
+#endif // CONFIG_STA_SUPPORT //
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Country Region.
+ This command will not work, if the field of CountryRegion in eeprom is programmed.
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_CountryRegion_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG region;
+
+ region = simple_strtol(arg, 0, 10);
+
+#ifdef EXT_BUILD_CHANNEL_LIST
+ return -EOPNOTSUPP;
+#endif // EXT_BUILD_CHANNEL_LIST //
+
+ // Country can be set only when EEPROM not programmed
+ if (pAd->CommonCfg.CountryRegion & 0x80)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameter of CountryRegion in eeprom is programmed \n"));
+ return FALSE;
+ }
+
+ if((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND))
+ {
+ pAd->CommonCfg.CountryRegion = (UCHAR) region;
+ }
+ else if (region == REGION_31_BG_BAND)
+ {
+ pAd->CommonCfg.CountryRegion = (UCHAR) region;
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameters out of range\n"));
+ return FALSE;
+ }
+
+ // if set country region, driver needs to be reset
+ BuildChannelList(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Country Region for A band.
+ This command will not work, if the field of CountryRegion in eeprom is programmed.
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_CountryRegionABand_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG region;
+
+ region = simple_strtol(arg, 0, 10);
+
+#ifdef EXT_BUILD_CHANNEL_LIST
+ return -EOPNOTSUPP;
+#endif // EXT_BUILD_CHANNEL_LIST //
+
+ // Country can be set only when EEPROM not programmed
+ if (pAd->CommonCfg.CountryRegionForABand & 0x80)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameter of CountryRegion in eeprom is programmed \n"));
+ return FALSE;
+ }
+
+ if((region >= 0) && (region <= REGION_MAXIMUM_A_BAND))
+ {
+ pAd->CommonCfg.CountryRegionForABand = (UCHAR) region;
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameters out of range\n"));
+ return FALSE;
+ }
+
+ // if set country region, driver needs to be reset
+ BuildChannelList(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Wireless Mode
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_WirelessMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG WirelessMode;
+ INT success = TRUE;
+
+ WirelessMode = simple_strtol(arg, 0, 10);
+
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ INT MaxPhyMode = PHY_11G;
+
+#ifdef DOT11_N_SUPPORT
+ MaxPhyMode = PHY_11N_5G;
+#endif // DOT11_N_SUPPORT //
+
+ if (WirelessMode <= MaxPhyMode)
+ {
+ RTMPSetPhyMode(pAd, WirelessMode);
+#ifdef DOT11_N_SUPPORT
+ if (WirelessMode >= PHY_11ABGN_MIXED)
+ {
+ pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+ pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE;
+ }
+ else
+ {
+ pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+ pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE;
+ }
+#endif // DOT11_N_SUPPORT //
+ // Set AdhocMode rates
+ if (pAd->StaCfg.BssType == BSS_ADHOC)
+ {
+ MlmeUpdateTxRates(pAd, FALSE, 0);
+ MakeIbssBeacon(pAd); // re-build BEACON frame
+ AsicEnableIbssSync(pAd); // copy to on-chip memory
+ }
+ }
+ else
+ {
+ success = FALSE;
+ }
+ }
+#endif // CONFIG_STA_SUPPORT //
+
+ // it is needed to set SSID to take effect
+ if (success == TRUE)
+ {
+#ifdef DOT11_N_SUPPORT
+ SetCommonHT(pAd);
+#endif // DOT11_N_SUPPORT //
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode));
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n"));
+ }
+
+ return success;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Channel
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_Channel_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ INT success = TRUE;
+ UCHAR Channel;
+
+ Channel = (UCHAR) simple_strtol(arg, 0, 10);
+
+ // check if this channel is valid
+ if (ChannelSanity(pAd, Channel) == TRUE)
+ {
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ pAd->CommonCfg.Channel = Channel;
+
+ if (MONITOR_ON(pAd))
+ {
+#ifdef DOT11_N_SUPPORT
+ N_ChannelCheck(pAd);
+ if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
+ pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
+ {
+ N_SetCenCh(pAd);
+ AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
+ DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n",
+ pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel));
+ }
+ else
+#endif // DOT11_N_SUPPORT //
+ {
+ AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.Channel);
+ DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel));
+ }
+ }
+ }
+#endif // CONFIG_STA_SUPPORT //
+ success = TRUE;
+ }
+ else
+ {
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ success = FALSE;
+#endif // CONFIG_STA_SUPPORT //
+ }
+
+
+ if (success == TRUE)
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel));
+
+ return success;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Short Slot Time Enable or Disable
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_ShortSlot_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG ShortSlot;
+
+ ShortSlot = simple_strtol(arg, 0, 10);
+
+ if (ShortSlot == 1)
+ pAd->CommonCfg.bUseShortSlotTime = TRUE;
+ else if (ShortSlot == 0)
+ pAd->CommonCfg.bUseShortSlotTime = FALSE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Tx power
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_TxPower_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG TxPower;
+ INT success = FALSE;
+
+ TxPower = (ULONG) simple_strtol(arg, 0, 10);
+ if (TxPower <= 100)
+ {
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ pAd->CommonCfg.TxPowerDefault = TxPower;
+ pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
+ }
+#endif // CONFIG_STA_SUPPORT //
+ success = TRUE;
+ }
+ else
+ success = FALSE;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage));
+
+ return success;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set 11B/11G Protection
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_BGProtection_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ switch (simple_strtol(arg, 0, 10))
+ {
+ case 0: //AUTO
+ pAd->CommonCfg.UseBGProtection = 0;
+ break;
+ case 1: //Always On
+ pAd->CommonCfg.UseBGProtection = 1;
+ break;
+ case 2: //Always OFF
+ pAd->CommonCfg.UseBGProtection = 2;
+ break;
+ default: //Invalid argument
+ return FALSE;
+ }
+
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set TxPreamble
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_TxPreamble_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ RT_802_11_PREAMBLE Preamble;
+
+ Preamble = simple_strtol(arg, 0, 10);
+
+
+ switch (Preamble)
+ {
+ case Rt802_11PreambleShort:
+ pAd->CommonCfg.TxPreamble = Preamble;
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
+#endif // CONFIG_STA_SUPPORT //
+ break;
+ case Rt802_11PreambleLong:
+#ifdef CONFIG_STA_SUPPORT
+ case Rt802_11PreambleAuto:
+ // if user wants AUTO, initialize to LONG here, then change according to AP's
+ // capability upon association.
+#endif // CONFIG_STA_SUPPORT //
+ pAd->CommonCfg.TxPreamble = Preamble;
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
+#endif // CONFIG_STA_SUPPORT //
+ break;
+ default: //Invalid argument
+ return FALSE;
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set RTS Threshold
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_RTSThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ NDIS_802_11_RTS_THRESHOLD RtsThresh;
+
+ RtsThresh = simple_strtol(arg, 0, 10);
+
+ if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
+ pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
+#ifdef CONFIG_STA_SUPPORT
+ else if (RtsThresh == 0)
+ pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
+#endif // CONFIG_STA_SUPPORT //
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set Fragment Threshold
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_FragThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
+
+ FragThresh = simple_strtol(arg, 0, 10);
+
+ if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
+ {
+ //Illegal FragThresh so we set it to default
+ pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
+ }
+ else if (FragThresh % 2 == 1)
+ {
+ // The length of each fragment shall always be an even number of octets, except for the last fragment
+ // of an MSDU or MMPDU, which may be either an even or an odd number of octets.
+ pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
+ }
+ else
+ {
+ pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
+ }
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
+ pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
+ else
+ pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
+ }
+#endif // CONFIG_STA_SUPPORT //
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Set TxBurst
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_TxBurst_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG TxBurst;
+
+ TxBurst = simple_strtol(arg, 0, 10);
+ if (TxBurst == 1)
+ pAd->CommonCfg.bEnableTxBurst = TRUE;
+ else if (TxBurst == 0)
+ pAd->CommonCfg.bEnableTxBurst = FALSE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst));
+
+ return TRUE;
+}
+
+#ifdef AGGREGATION_SUPPORT
+/*
+ ==========================================================================
+ Description:
+ Set TxBurst
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_PktAggregate_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG aggre;
+
+ aggre = simple_strtol(arg, 0, 10);
+
+ if (aggre == 1)
+ pAd->CommonCfg.bAggregationCapable = TRUE;
+ else if (aggre == 0)
+ pAd->CommonCfg.bAggregationCapable = FALSE;
+ else
+ return FALSE; //Invalid argument
+
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable));
+
+ return TRUE;
+}
+#endif
+
+/*
+ ==========================================================================
+ Description:
+ Set IEEE80211H.
+ This parameter is 1 when needs radar detection, otherwise 0
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_IEEE80211H_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG ieee80211h;
+
+ ieee80211h = simple_strtol(arg, 0, 10);
+
+ if (ieee80211h == 1)
+ pAd->CommonCfg.bIEEE80211H = TRUE;
+ else if (ieee80211h == 0)
+ pAd->CommonCfg.bIEEE80211H = FALSE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H));
+
+ return TRUE;
+}
+
+
+#ifdef DBG
+/*
+ ==========================================================================
+ Description:
+ For Debug information
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_Debug_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n"));
+
+ if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD)
+ RTDebugLevel = simple_strtol(arg, 0, 10);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel));
+
+ return TRUE;
+}
+#endif
+
+INT Show_DescInfo_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+ return TRUE;
+}
+
+/*
+ ==========================================================================
+ Description:
+ Reset statistics counter
+
+ Arguments:
+ pAdapter Pointer to our adapter
+ arg
+
+ Return:
+ TRUE if all parameters are OK, FALSE otherwise
+ ==========================================================================
+*/
+INT Set_ResetStatCounter_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ //UCHAR i;
+ //MAC_TABLE_ENTRY *pEntry;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n"));
+
+ // add the most up-to-date h/w raw counters into software counters
+ NICUpdateRawCounters(pAd);
+
+ NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11));
+ NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3));
+ NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK));
+
+ return TRUE;
+}
+
+BOOLEAN RTMPCheckStrPrintAble(
+ IN CHAR *pInPutStr,
+ IN UCHAR strLen)
+{
+ UCHAR i=0;
+
+ for (i=0; i<strLen; i++)
+ {
+ if ((pInPutStr[i] < 0x21) ||
+ (pInPutStr[i] > 0x7E))
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+ Remove WPA Key process
+
+ Arguments:
+ pAd Pointer to our adapter
+ pBuf Pointer to the where the key stored
+
+ Return Value:
+ NDIS_SUCCESS Add key successfully
+
+ IRQL = DISPATCH_LEVEL
+
+ Note:
+
+ ========================================================================
+*/
+#ifdef CONFIG_STA_SUPPORT
+VOID RTMPSetDesiredRates(
+ IN PRTMP_ADAPTER pAdapter,
+ IN LONG Rates)
+{
+ NDIS_802_11_RATES aryRates;
+
+ memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES));
+ switch (pAdapter->CommonCfg.PhyMode)
+ {
+ case PHY_11A: // A only
+ switch (Rates)
+ {
+ case 6000000: //6M
+ aryRates[0] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 9000000: //9M
+ aryRates[0] = 0x12; // 9M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 12000000: //12M
+ aryRates[0] = 0x18; // 12M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 18000000: //18M
+ aryRates[0] = 0x24; // 18M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 24000000: //24M
+ aryRates[0] = 0x30; // 24M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
+ break;
+ case 36000000: //36M
+ aryRates[0] = 0x48; // 36M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
+ break;
+ case 48000000: //48M
+ aryRates[0] = 0x60; // 48M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
+ break;
+ case 54000000: //54M
+ aryRates[0] = 0x6c; // 54M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
+ break;
+ case -1: //Auto
+ default:
+ aryRates[0] = 0x6c; // 54Mbps
+ aryRates[1] = 0x60; // 48Mbps
+ aryRates[2] = 0x48; // 36Mbps
+ aryRates[3] = 0x30; // 24Mbps
+ aryRates[4] = 0x24; // 18M
+ aryRates[5] = 0x18; // 12M
+ aryRates[6] = 0x12; // 9M
+ aryRates[7] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
+ break;
+ }
+ break;
+ case PHY_11BG_MIXED: // B/G Mixed
+ case PHY_11B: // B only
+ case PHY_11ABG_MIXED: // A/B/G Mixed
+ default:
+ switch (Rates)
+ {
+ case 1000000: //1M
+ aryRates[0] = 0x02;
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 2000000: //2M
+ aryRates[0] = 0x04;
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 5000000: //5.5M
+ aryRates[0] = 0x0b; // 5.5M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 11000000: //11M
+ aryRates[0] = 0x16; // 11M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 6000000: //6M
+ aryRates[0] = 0x0c; // 6M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0;
+ break;
+ case 9000000: //9M
+ aryRates[0] = 0x12; // 9M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1;
+ break;
+ case 12000000: //12M
+ aryRates[0] = 0x18; // 12M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2;
+ break;
+ case 18000000: //18M
+ aryRates[0] = 0x24; // 18M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3;
+ break;
+ case 24000000: //24M
+ aryRates[0] = 0x30; // 24M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4;
+ break;
+ case 36000000: //36M
+ aryRates[0] = 0x48; // 36M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5;
+ break;
+ case 48000000: //48M
+ aryRates[0] = 0x60; // 48M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6;
+ break;
+ case 54000000: //54M
+ aryRates[0] = 0x6c; // 54M
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7;
+ break;
+ case -1: //Auto
+ default:
+ if (pAdapter->CommonCfg.PhyMode == PHY_11B)
+ { //B Only
+ aryRates[0] = 0x16; // 11Mbps
+ aryRates[1] = 0x0b; // 5.5Mbps
+ aryRates[2] = 0x04; // 2Mbps
+ aryRates[3] = 0x02; // 1Mbps
+ }
+ else
+ { //(B/G) Mixed or (A/B/G) Mixed
+ aryRates[0] = 0x6c; // 54Mbps
+ aryRates[1] = 0x60; // 48Mbps
+ aryRates[2] = 0x48; // 36Mbps
+ aryRates[3] = 0x30; // 24Mbps
+ aryRates[4] = 0x16; // 11Mbps
+ aryRates[5] = 0x0b; // 5.5Mbps
+ aryRates[6] = 0x04; // 2Mbps
+ aryRates[7] = 0x02; // 1Mbps
+ }
+ pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
+ break;
+ }
+ break;
+ }
+
+ NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
+ DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
+ pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
+ pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
+ pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
+ pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
+ // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
+ MlmeUpdateTxRates(pAdapter, FALSE, 0);
+}
+
+NDIS_STATUS RTMPWPARemoveKeyProc(
+ IN PRTMP_ADAPTER pAd,
+ IN PVOID pBuf)
+{
+ PNDIS_802_11_REMOVE_KEY pKey;
+ ULONG KeyIdx;
+ NDIS_STATUS Status = NDIS_STATUS_FAILURE;
+ BOOLEAN bTxKey; // Set the key as transmit key
+ BOOLEAN bPairwise; // Indicate the key is pairwise key
+ BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value.
+ // Otherwise, it will set by the NIC.
+ BOOLEAN bAuthenticator; // indicate key is set by authenticator.
+ INT i;
+
+ DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n"));
+
+ pKey = (PNDIS_802_11_REMOVE_KEY) pBuf;
+ KeyIdx = pKey->KeyIndex & 0xff;
+ // Bit 31 of Add-key, Tx Key
+ bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE;
+ // Bit 30 of Add-key PairwiseKey
+ bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE;
+ // Bit 29 of Add-key KeyRSC
+ bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE;
+ // Bit 28 of Add-key Authenticator
+ bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE;
+
+ // 1. If bTx is TRUE, return failure information
+ if (bTxKey == TRUE)
+ return(NDIS_STATUS_INVALID_DATA);
+
+ // 2. Check Pairwise Key
+ if (bPairwise)
+ {
+ // a. If BSSID is broadcast, remove all pairwise keys.
+ // b. If not broadcast, remove the pairwise specified by BSSID
+ for (i = 0; i < SHARE_KEY_NUM; i++)
+ {
+ if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID))
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i));
+ pAd->SharedKey[BSS0][i].KeyLen = 0;
+ pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE;
+ AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i);
+ Status = NDIS_STATUS_SUCCESS;
+ break;
+ }
+ }
+ }
+ // 3. Group Key
+ else
+ {
+ // a. If BSSID is broadcast, remove all group keys indexed
+ // b. If BSSID matched, delete the group key indexed.
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx));
+ pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0;
+ pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
+ AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx);
+ Status = NDIS_STATUS_SUCCESS;
+ }
+
+ return (Status);
+}
+#endif // CONFIG_STA_SUPPORT //
+
+
+#ifdef CONFIG_STA_SUPPORT
+/*
+ ========================================================================
+
+ Routine Description:
+ Remove All WPA Keys
+
+ Arguments:
+ pAd Pointer to our adapter
+
+ Return Value:
+ None
+
+ IRQL = DISPATCH_LEVEL
+
+ Note:
+
+ ========================================================================
+*/
+VOID RTMPWPARemoveAllKeys(
+ IN PRTMP_ADAPTER pAd)
+{
+
+ UCHAR i;
+
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus));
+
+ // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after
+ // Link up. And it will be replaced if user changed it.
+ if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
+ return;
+
+ // For WPA-None, there is no need to remove it, since WinXP won't set it again after
+ // Link up. And it will be replaced if user changed it.
+ if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
+ return;
+
+ // set BSSID wcid entry of the Pair-wise Key table as no-security mode
+ AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID);
+
+ // set all shared key mode as no-security.
+ for (i = 0; i < SHARE_KEY_NUM; i++)
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i));
+ NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY));
+
+ AsicRemoveSharedKeyEntry(pAd, BSS0, i);
+ }
+
+}
+#endif // CONFIG_STA_SUPPORT //
+
+/*
+ ========================================================================
+ Routine Description:
+ Change NIC PHY mode. Re-association may be necessary. possible settings
+ include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED
+
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
+
+ IRQL = PASSIVE_LEVEL
+ IRQL = DISPATCH_LEVEL
+
+ ========================================================================
+*/
+VOID RTMPSetPhyMode(
+ IN PRTMP_ADAPTER pAd,
+ IN ULONG phymode)
+{
+ INT i;
+ // the selected phymode must be supported by the RF IC encoded in E2PROM
+
+ pAd->CommonCfg.PhyMode = (UCHAR)phymode;
+
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
+#ifdef EXT_BUILD_CHANNEL_LIST
+ BuildChannelListEx(pAd);
+#else
+ BuildChannelList(pAd);
+#endif // EXT_BUILD_CHANNEL_LIST //
+
+ // sanity check user setting
+ for (i = 0; i < pAd->ChannelListNum; i++)
+ {
+ if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel)
+ break;
+ }
+
+ if (i == pAd->ChannelListNum)
+ {
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ pAd->CommonCfg.Channel = FirstChannel(pAd);
+#endif // CONFIG_STA_SUPPORT //
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
+ }
+
+ NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
+ NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
+ switch (phymode) {
+ case PHY_11B:
+ pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRateLen = 4;
+ pAd->CommonCfg.ExtRateLen = 0;
+ pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
+ //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use
+ break;
+
+ case PHY_11G:
+ case PHY_11BG_MIXED:
+ case PHY_11ABG_MIXED:
+#ifdef DOT11_N_SUPPORT
+ case PHY_11N_2_4G:
+ case PHY_11ABGN_MIXED:
+ case PHY_11BGN_MIXED:
+ case PHY_11GN_MIXED:
+#endif // DOT11_N_SUPPORT //
+ pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRateLen = 8;
+ pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.ExtRateLen = 4;
+ pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps
+ break;
+
+ case PHY_11A:
+#ifdef DOT11_N_SUPPORT
+ case PHY_11AN_MIXED:
+ case PHY_11AGN_MIXED:
+ case PHY_11N_5G:
+#endif // DOT11_N_SUPPORT //
+ pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate
+ pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.SupRateLen = 8;
+ pAd->CommonCfg.ExtRateLen = 0;
+ pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps
+ pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps
+ //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use
+ break;
+
+ default:
+ break;
+ }
+
+
+ pAd->CommonCfg.BandState = UNKNOWN_BAND;
+}
+
+
+#ifdef DOT11_N_SUPPORT
+/*
+ ========================================================================
+ Routine Description:
+ Caller ensures we has 802.11n support.
+ Calls at setting HT from AP/STASetinformation
+
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
+
+ ========================================================================
+*/
+VOID RTMPSetHT(
+ IN PRTMP_ADAPTER pAd,
+ IN OID_SET_HT_PHYMODE *pHTPhyMode)
+{
+ //ULONG *pmcs;
+ UINT32 Value = 0;
+ UCHAR BBPValue = 0;
+ UCHAR BBP3Value = 0;
+ UCHAR RxStream = pAd->CommonCfg.RxStream;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
+ pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
+ pHTPhyMode->MCS, pHTPhyMode->BW,
+ pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
+
+ // Don't zero supportedHyPhy structure.
+ RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability));
+ RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
+ RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
+ RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy));
+
+ if (pAd->CommonCfg.bRdg)
+ {
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1;
+ }
+ else
+ {
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0;
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0;
+ }
+
+ pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3;
+ pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
+
+ // Mimo power save, A-MSDU size,
+ pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
+ pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
+ pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
+ pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
+
+ pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
+ pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
+ pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
+ pAd->CommonCfg.DesiredHtPhy.AmsduSize,
+ pAd->CommonCfg.DesiredHtPhy.MimoPs,
+ pAd->CommonCfg.DesiredHtPhy.MpduDensity,
+ pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor));
+
+ if(pHTPhyMode->HtMode == HTMODE_GF)
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1;
+ pAd->CommonCfg.DesiredHtPhy.GF = 1;
+ }
+ else
+ pAd->CommonCfg.DesiredHtPhy.GF = 0;
+
+ // Decide Rx MCSSet
+ switch (RxStream)
+ {
+ case 1:
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0x00;
+ break;
+
+ case 2:
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
+ break;
+
+ case 3: // 3*3
+ pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff;
+ pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff;
+ break;
+ }
+
+ if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) )
+ {
+ pHTPhyMode->BW = BW_20;
+ pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1;
+ }
+
+ if(pHTPhyMode->BW == BW_40)
+ {
+ pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32
+ pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1;
+ if (pAd->CommonCfg.Channel <= 14)
+ pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1;
+
+ pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
+ // Set Regsiter for extension channel position.
+ RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value);
+ if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW))
+ {
+ Value |= 0x1;
+ BBP3Value |= (0x20);
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
+ }
+ else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE))
+ {
+ Value &= 0xfe;
+ BBP3Value &= (~0x20);
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
+ }
+
+ // Turn on BBP 40MHz mode now only as AP .
+ // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.
+ if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
+ )
+ {
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue &= (~0x18);
+ BBPValue |= 0x10;
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value);
+ pAd->CommonCfg.BBPCurrentBW = BW_40;
+ }
+ }
+ else
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0;
+ pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
+ pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
+ // Turn on BBP 20MHz mode by request here.
+ {
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue &= (~0x18);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+ pAd->CommonCfg.BBPCurrentBW = BW_20;
+ }
+ }
+
+ if(pHTPhyMode->STBC == STBC_USE)
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1;
+ pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1;
+ pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1;
+ pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1;
+ }
+ else
+ {
+ pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
+ pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
+ }
+
+ if(pHTPhyMode->SHORTGI == GI_400)
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1;
+ }
+ else
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0;
+ pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0;
+ pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0;
+ }
+
+ // We support link adaptation for unsolicit MCS feedback, set to 2.
+ pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT;
+ pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
+ // 1, the extension channel above the control channel.
+
+ // EDCA parameters used for AP's own transmission
+ if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
+ {
+ pAd->CommonCfg.APEdcaParm.bValid = TRUE;
+ pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
+ pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
+ pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
+ pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
+
+ pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
+ pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
+
+ pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
+ pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
+ pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
+
+ pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[2] = 94;
+ pAd->CommonCfg.APEdcaParm.Txop[3] = 47;
+ }
+ AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
+
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ RTMPSetIndividualHT(pAd, 0);
+ }
+#endif // CONFIG_STA_SUPPORT //
+
+}
+
+/*
+ ========================================================================
+ Routine Description:
+ Caller ensures we has 802.11n support.
+ Calls at setting HT from AP/STASetinformation
+
+ Arguments:
+ pAd - Pointer to our adapter
+ phymode -
+
+ ========================================================================
+*/
+VOID RTMPSetIndividualHT(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR apidx)
+{
+ PRT_HT_PHY_INFO pDesired_ht_phy = NULL;
+ UCHAR TxStream = pAd->CommonCfg.TxStream;
+ UCHAR DesiredMcs = MCS_AUTO;
+
+ do
+ {
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
+ DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
+ //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
+ break;
+ }
+#endif // CONFIG_STA_SUPPORT //
+ } while (FALSE);
+
+ if (pDesired_ht_phy == NULL)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx));
+ return;
+ }
+ RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO));
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs));
+ // Check the validity of MCS
+ if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15)))
+ {
+ DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs));
+ DesiredMcs = MCS_7;
+ }
+
+ if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32))
+ {
+ DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n"));
+ DesiredMcs = MCS_0;
+ }
+
+ pDesired_ht_phy->bHtEnable = TRUE;
+
+ // Decide desired Tx MCS
+ switch (TxStream)
+ {
+ case 1:
+ if (DesiredMcs == MCS_AUTO)
+ {
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0x00;
+ }
+ else if (DesiredMcs <= MCS_7)
+ {
+ pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs;
+ pDesired_ht_phy->MCSSet[1]= 0x00;
+ }
+ break;
+
+ case 2:
+ if (DesiredMcs == MCS_AUTO)
+ {
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0xff;
+ }
+ else if (DesiredMcs <= MCS_15)
+ {
+ ULONG mode;
+
+ mode = DesiredMcs / 8;
+ if (mode < 2)
+ pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
+ }
+ break;
+
+ case 3: // 3*3
+ if (DesiredMcs == MCS_AUTO)
+ {
+ /* MCS0 ~ MCS23, 3 bytes */
+ pDesired_ht_phy->MCSSet[0]= 0xff;
+ pDesired_ht_phy->MCSSet[1]= 0xff;
+ pDesired_ht_phy->MCSSet[2]= 0xff;
+ }
+ else if (DesiredMcs <= MCS_23)
+ {
+ ULONG mode;
+
+ mode = DesiredMcs / 8;
+ if (mode < 3)
+ pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8));
+ }
+ break;
+ }
+
+ if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40)
+ {
+ if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32)
+ pDesired_ht_phy->MCSSet[4] = 0x1;
+ }
+
+ // update HT Rate setting
+ if (pAd->OpMode == OPMODE_STA)
+ MlmeUpdateHtTxRates(pAd, BSS0);
+ else
+ MlmeUpdateHtTxRates(pAd, apidx);
+}
+
+
+/*
+ ========================================================================
+ Routine Description:
+ Update HT IE from our capability.
+
+ Arguments:
+ Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
+
+
+ ========================================================================
+*/
+VOID RTMPUpdateHTIE(
+ IN RT_HT_CAPABILITY *pRtHt,
+ IN UCHAR *pMcsSet,
+ OUT HT_CAPABILITY_IE *pHtCapability,
+ OUT ADD_HT_INFO_IE *pAddHtInfo)
+{
+ RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
+ RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
+
+ pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
+ pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
+ pHtCapability->HtCapInfo.GF = pRtHt->GF;
+ pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
+ pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
+ pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
+ pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
+ pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
+ pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
+ pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;
+
+ pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
+ pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
+ pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
+ pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
+ RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar.
+
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
+}
+#endif // DOT11_N_SUPPORT //
+
+/*
+ ========================================================================
+ Description:
+ Add Client security information into ASIC WCID table and IVEIV table.
+ Return:
+ ========================================================================
+*/
+VOID RTMPAddWcidAttributeEntry(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR BssIdx,
+ IN UCHAR KeyIdx,
+ IN UCHAR CipherAlg,
+ IN MAC_TABLE_ENTRY *pEntry)
+{
+ UINT32 WCIDAttri = 0;
+ USHORT offset;
+ UCHAR IVEIV = 0;
+ USHORT Wcid = 0;
+
+ {
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ if (BssIdx > BSS0)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx));
+ return;
+ }
+
+ // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists.
+ // 2. In Infra mode, the AID:1 MUST be wcid of infra STA.
+ // the AID:2~ assign to mesh link entry.
+ if (pEntry && ADHOC_ON(pAd))
+ Wcid = pEntry->Aid;
+ else if (pEntry && INFRA_ON(pAd))
+ {
+#ifdef QOS_DLS_SUPPORT
+ if (pEntry->ValidAsDls == TRUE)
+ Wcid = pEntry->Aid;
+ else
+#endif // QOS_DLS_SUPPORT //
+ Wcid = BSSID_WCID;
+ }
+ else
+ Wcid = MCAST_WCID;
+ }
+#endif // CONFIG_STA_SUPPORT //
+ }
+
+ // Update WCID attribute table
+ offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ if (pEntry && pEntry->ValidAsMesh)
+ WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
+#ifdef QOS_DLS_SUPPORT
+ else if ((pEntry) && (pEntry->ValidAsDls) &&
+ ((CipherAlg == CIPHER_TKIP) ||
+ (CipherAlg == CIPHER_TKIP_NO_MIC) ||
+ (CipherAlg == CIPHER_AES) ||
+ (CipherAlg == CIPHER_NONE)))
+ WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
+#endif // QOS_DLS_SUPPORT //
+ else
+ WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
+ }
+#endif // CONFIG_STA_SUPPORT //
+
+ RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
+
+
+ // Update IV/EIV table
+ offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE);
+
+ // WPA mode
+ if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES))
+ {
+ // Eiv bit on. keyid always is 0 for pairwise key
+ IVEIV = (KeyIdx <<6) | 0x20;
+ }
+ else
+ {
+ // WEP KeyIdx is default tx key.
+ IVEIV = (KeyIdx << 6);
+ }
+
+ // For key index and ext IV bit, so only need to update the position(offset+3).
+#ifdef RT2870
+ RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
+#endif // RT2870 //
+
+ DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
+ DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri));
+
+}
+
+/*
+ ==========================================================================
+ Description:
+ Parse encryption type
+Arguments:
+ pAdapter Pointer to our adapter
+ wrq Pointer to the ioctl argument
+
+ Return Value:
+ None
+
+ Note:
+ ==========================================================================
+*/
+CHAR *GetEncryptType(CHAR enc)
+{
+ if(enc == Ndis802_11WEPDisabled)
+ return "NONE";
+ if(enc == Ndis802_11WEPEnabled)
+ return "WEP";
+ if(enc == Ndis802_11Encryption2Enabled)
+ return "TKIP";
+ if(enc == Ndis802_11Encryption3Enabled)
+ return "AES";
+ if(enc == Ndis802_11Encryption4Enabled)
+ return "TKIPAES";
+ else
+ return "UNKNOW";
+}
+
+CHAR *GetAuthMode(CHAR auth)
+{
+ if(auth == Ndis802_11AuthModeOpen)
+ return "OPEN";
+ if(auth == Ndis802_11AuthModeShared)
+ return "SHARED";
+ if(auth == Ndis802_11AuthModeAutoSwitch)
+ return "AUTOWEP";
+ if(auth == Ndis802_11AuthModeWPA)
+ return "WPA";
+ if(auth == Ndis802_11AuthModeWPAPSK)
+ return "WPAPSK";
+ if(auth == Ndis802_11AuthModeWPANone)
+ return "WPANONE";
+ if(auth == Ndis802_11AuthModeWPA2)
+ return "WPA2";
+ if(auth == Ndis802_11AuthModeWPA2PSK)
+ return "WPA2PSK";
+ if(auth == Ndis802_11AuthModeWPA1WPA2)
+ return "WPA1WPA2";
+ if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK)
+ return "WPA1PSKWPA2PSK";
+
+ return "UNKNOW";
+}
+
+#if 1 //#ifndef UCOS
+/*
+ ==========================================================================
+ Description:
+ Get site survey results
+ Arguments:
+ pAdapter Pointer to our adapter
+ wrq Pointer to the ioctl argument
+
+ Return Value:
+ None
+
+ Note:
+ Usage:
+ 1.) UI needs to wait 4 seconds after issue a site survey command
+ 2.) iwpriv ra0 get_site_survey
+ 3.) UI needs to prepare at least 4096bytes to get the results
+ ==========================================================================
+*/
+#define LINE_LEN (4+33+20+8+10+9+7+3) // Channel+SSID+Bssid+WepStatus+AuthMode+Signal+WiressMode+NetworkType
+#ifdef CONFIG_STA_SUPPORT
+#endif // CONFIG_STA_SUPPORT //
+VOID RTMPIoctlGetSiteSurvey(
+ IN PRTMP_ADAPTER pAdapter,
+ IN struct iwreq *wrq)
+{
+ CHAR *msg;
+ INT i=0;
+ INT WaitCnt;
+ INT Status=0;
+ CHAR Ssid[MAX_LEN_OF_SSID +1];
+ INT Rssi = 0, max_len = LINE_LEN;
+ UINT Rssi_Quality = 0;
+ NDIS_802_11_NETWORK_TYPE wireless_mode;
+
+ os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len));
+
+ if (msg == NULL)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n"));
+ return;
+ }
+
+ memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len );
+ memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1));
+ sprintf(msg,"%s","\n");
+ sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-8s%-10s%-9s%-7s%-3s\n",
+ "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
+
+#ifdef CONFIG_STA_SUPPORT
+#endif // CONFIG_STA_SUPPORT //
+
+ WaitCnt = 0;
+#ifdef CONFIG_STA_SUPPORT
+ pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
+ while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
+ OS_WAIT(500);
+#endif // CONFIG_STA_SUPPORT //
+
+ for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
+ {
+ if( pAdapter->ScanTab.BssEntry[i].Channel==0)
+ break;
+
+ if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA)
+ break;
+
+ //Channel
+ sprintf(msg+strlen(msg),"%-4d", pAdapter->ScanTab.BssEntry[i].Channel);
+ //SSID
+ memcpy(Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
+ Ssid[pAdapter->ScanTab.BssEntry[i].SsidLen] = '\0';
+ sprintf(msg+strlen(msg),"%-33s", Ssid);
+ //BSSID
+ sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x ",
+ pAdapter->ScanTab.BssEntry[i].Bssid[0],
+ pAdapter->ScanTab.BssEntry[i].Bssid[1],
+ pAdapter->ScanTab.BssEntry[i].Bssid[2],
+ pAdapter->ScanTab.BssEntry[i].Bssid[3],
+ pAdapter->ScanTab.BssEntry[i].Bssid[4],
+ pAdapter->ScanTab.BssEntry[i].Bssid[5]);
+ //Encryption Type
+ sprintf(msg+strlen(msg),"%-8s",GetEncryptType(pAdapter->ScanTab.BssEntry[i].WepStatus));
+ //Authentication Mode
+ if (pAdapter->ScanTab.BssEntry[i].WepStatus == Ndis802_11WEPEnabled)
+ sprintf(msg+strlen(msg),"%-10s", "UNKNOW");
+ else
+ sprintf(msg+strlen(msg),"%-10s",GetAuthMode(pAdapter->ScanTab.BssEntry[i].AuthMode));
+ // Rssi
+ Rssi = (INT)pAdapter->ScanTab.BssEntry[i].Rssi;
+ if (Rssi >= -50)
+ Rssi_Quality = 100;
+ else if (Rssi >= -80) // between -50 ~ -80dbm
+ Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10);
+ else if (Rssi >= -90) // between -80 ~ -90dbm
+ Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10);
+ else // < -84 dbm
+ Rssi_Quality = 0;
+ sprintf(msg+strlen(msg),"%-9d", Rssi_Quality);
+ // Wireless Mode
+ wireless_mode = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
+ if (wireless_mode == Ndis802_11FH ||
+ wireless_mode == Ndis802_11DS)
+ sprintf(msg+strlen(msg),"%-7s", "11b");
+ else if (wireless_mode == Ndis802_11OFDM5)
+ sprintf(msg+strlen(msg),"%-7s", "11a");
+ else if (wireless_mode == Ndis802_11OFDM5_N)
+ sprintf(msg+strlen(msg),"%-7s", "11a/n");
+ else if (wireless_mode == Ndis802_11OFDM24)
+ sprintf(msg+strlen(msg),"%-7s", "11b/g");
+ else if (wireless_mode == Ndis802_11OFDM24_N)
+ sprintf(msg+strlen(msg),"%-7s", "11b/g/n");
+ else
+ sprintf(msg+strlen(msg),"%-7s", "unknow");
+ //Network Type
+ if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_ADHOC)
+ sprintf(msg+strlen(msg),"%-3s", " Ad");
+ else
+ sprintf(msg+strlen(msg),"%-3s", " In");
+
+ sprintf(msg+strlen(msg),"\n");
+#ifdef CONFIG_STA_SUPPORT
+#endif // CONFIG_STA_SUPPORT //
+ }
+
+#ifdef CONFIG_STA_SUPPORT
+ pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
+#endif // CONFIG_STA_SUPPORT //
+ wrq->u.data.length = strlen(msg);
+ Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length));
+ os_free_mem(NULL, (PUCHAR)msg);
+}
+
+
+#define MAC_LINE_LEN (14+4+4+10+10+10+6+6) // Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate
+VOID RTMPIoctlGetMacTable(
+ IN PRTMP_ADAPTER pAd,
+ IN struct iwreq *wrq)
+{
+ INT i;
+ RT_802_11_MAC_TABLE MacTab;
+ char *msg;
+
+ MacTab.Num = 0;
+ for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
+ {
+ if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC))
+ {
+ COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr);
+ MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid;
+ MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode;
+#ifdef DOT11_N_SUPPORT
+ MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode;
+#endif // DOT11_N_SUPPORT //
+
+ // Fill in RSSI per entry
+ MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0;
+ MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1;
+ MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2;
+
+ // the connected time per entry
+ MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime;
+ MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS;
+ MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW;
+ MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI;
+ MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC;
+ MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv;
+ MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE;
+ MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word;
+
+ MacTab.Num += 1;
+ }
+ }
+ wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE);
+ if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __FUNCTION__));
+ }
+
+ msg = (CHAR *) kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG);
+ memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN );
+ sprintf(msg,"%s","\n");
+ sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n",
+ "MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR");
+
+ for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
+ {
+ PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
+ if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC))
+ {
+ if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) )
+ break;
+ sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x ",
+ pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
+ pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
+ sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid);
+ sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode);
+ sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo
+ sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo
+ sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo
+ sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]);
+ sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo
+ }
+ }
+ // for compatible with old API just do the printk to console
+ //wrq->u.data.length = strlen(msg);
+ //if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("%s", msg));
+ }
+
+ kfree(msg);
+}
+#endif // UCOS //
+
+#ifdef DOT11_N_SUPPORT
+INT Set_BASetup_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR mac[6], tid;
+ char *token, sepValue[] = ":", DASH = '-';
+ INT i;
+ MAC_TABLE_ENTRY *pEntry;
+
+/*
+ The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d,
+ =>The six 2 digit hex-decimal number previous are the Mac address,
+ =>The seventh decimal number is the tid value.
+*/
+ //printk("\n%s\n", arg);
+
+ if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
+ return FALSE;
+
+ token = strchr(arg, DASH);
+ if ((token != NULL) && (strlen(token)>1))
+ {
+ tid = simple_strtol((token+1), 0, 10);
+ if (tid > 15)
+ return FALSE;
+
+ *token = '\0';
+ for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
+ {
+ if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
+ return FALSE;
+ AtoH(token, (PUCHAR)(&mac[i]), 1);
+ }
+ if(i != 6)
+ return FALSE;
+
+ printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n", mac[0], mac[1],
+ mac[2], mac[3], mac[4], mac[5], tid);
+
+ pEntry = MacTableLookup(pAd, mac);
+
+ if (pEntry) {
+ printk("\nSetup BA Session: Tid = %d\n", tid);
+ BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE);
+ }
+
+ return TRUE;
+ }
+
+ return FALSE;
+
+}
+
+INT Set_BADecline_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG bBADecline;
+
+ bBADecline = simple_strtol(arg, 0, 10);
+
+ if (bBADecline == 0)
+ {
+ pAd->CommonCfg.bBADecline = FALSE;
+ }
+ else if (bBADecline == 1)
+ {
+ pAd->CommonCfg.bBADecline = TRUE;
+ }
+ else
+ {
+ return FALSE; //Invalid argument
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline));
+
+ return TRUE;
+}
+
+INT Set_BAOriTearDown_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR mac[6], tid;
+ char *token, sepValue[] = ":", DASH = '-';
+ INT i;
+ MAC_TABLE_ENTRY *pEntry;
+
+ //printk("\n%s\n", arg);
+/*
+ The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
+ =>The six 2 digit hex-decimal number previous are the Mac address,
+ =>The seventh decimal number is the tid value.
+*/
+ if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
+ return FALSE;
+
+ token = strchr(arg, DASH);
+ if ((token != NULL) && (strlen(token)>1))
+ {
+ tid = simple_strtol((token+1), 0, 10);
+ if (tid > NUM_OF_TID)
+ return FALSE;
+
+ *token = '\0';
+ for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
+ {
+ if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
+ return FALSE;
+ AtoH(token, (PUCHAR)(&mac[i]), 1);
+ }
+ if(i != 6)
+ return FALSE;
+
+ printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
+ mac[2], mac[3], mac[4], mac[5], tid);
+
+ pEntry = MacTableLookup(pAd, mac);
+
+ if (pEntry) {
+ printk("\nTear down Ori BA Session: Tid = %d\n", tid);
+ BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE);
+ }
+
+ return TRUE;
+ }
+
+ return FALSE;
+
+}
+
+INT Set_BARecTearDown_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR mac[6], tid;
+ char *token, sepValue[] = ":", DASH = '-';
+ INT i;
+ MAC_TABLE_ENTRY *pEntry;
+
+ //printk("\n%s\n", arg);
+/*
+ The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
+ =>The six 2 digit hex-decimal number previous are the Mac address,
+ =>The seventh decimal number is the tid value.
+*/
+ if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
+ return FALSE;
+
+ token = strchr(arg, DASH);
+ if ((token != NULL) && (strlen(token)>1))
+ {
+ tid = simple_strtol((token+1), 0, 10);
+ if (tid > NUM_OF_TID)
+ return FALSE;
+
+ *token = '\0';
+ for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
+ {
+ if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
+ return FALSE;
+ AtoH(token, (PUCHAR)(&mac[i]), 1);
+ }
+ if(i != 6)
+ return FALSE;
+
+ printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
+ mac[2], mac[3], mac[4], mac[5], tid);
+
+ pEntry = MacTableLookup(pAd, mac);
+
+ if (pEntry) {
+ printk("\nTear down Rec BA Session: Tid = %d\n", tid);
+ BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE);
+ }
+
+ return TRUE;
+ }
+
+ return FALSE;
+
+}
+
+INT Set_HtBw_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG HtBw;
+
+ HtBw = simple_strtol(arg, 0, 10);
+ if (HtBw == BW_40)
+ pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
+ else if (HtBw == BW_20)
+ pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW));
+
+ return TRUE;
+}
+
+INT Set_HtMcs_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG HtMcs, Mcs_tmp;
+#ifdef CONFIG_STA_SUPPORT
+ BOOLEAN bAutoRate = FALSE;
+#endif // CONFIG_STA_SUPPORT //
+
+ Mcs_tmp = simple_strtol(arg, 0, 10);
+
+ if (Mcs_tmp <= 15 || Mcs_tmp == 32)
+ HtMcs = Mcs_tmp;
+ else
+ HtMcs = MCS_AUTO;
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
+ pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n",
+ pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch));
+
+ if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) ||
+ (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX))
+ {
+ if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
+ (HtMcs >= 0 && HtMcs <= 3) &&
+ (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK))
+ {
+ RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000));
+ }
+ else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) &&
+ (HtMcs >= 0 && HtMcs <= 7) &&
+ (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM))
+ {
+ RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000));
+ }
+ else
+ bAutoRate = TRUE;
+
+ if (bAutoRate)
+ {
+ pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
+ RTMPSetDesiredRates(pAd, -1);
+ }
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode));
+ }
+ if (ADHOC_ON(pAd))
+ return TRUE;
+ }
+#endif // CONFIG_STA_SUPPORT //
+
+ SetCommonHT(pAd);
+
+ return TRUE;
+}
+
+INT Set_HtGi_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG HtGi;
+
+ HtGi = simple_strtol(arg, 0, 10);
+
+ if ( HtGi == GI_400)
+ pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
+ else if ( HtGi == GI_800 )
+ pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI));
+
+ return TRUE;
+}
+
+
+INT Set_HtTxBASize_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR Size;
+
+ Size = simple_strtol(arg, 0, 10);
+
+ if (Size <=0 || Size >=64)
+ {
+ Size = 8;
+ }
+ pAd->CommonCfg.TxBASize = Size-1;
+ DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size));
+
+ return TRUE;
+}
+
+
+INT Set_HtOpMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value == HTMODE_GF)
+ pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF;
+ else if ( Value == HTMODE_MM )
+ pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE));
+
+ return TRUE;
+
+}
+
+INT Set_HtStbc_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value == STBC_USE)
+ pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
+ else if ( Value == STBC_NONE )
+ pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC));
+
+ return TRUE;
+}
+
+INT Set_HtHtc_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->HTCEnable = FALSE;
+ else if ( Value ==1 )
+ pAd->HTCEnable = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable));
+
+ return TRUE;
+}
+
+INT Set_HtExtcha_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value == 0)
+ pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
+ else if ( Value ==1 )
+ pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA));
+
+ return TRUE;
+}
+
+INT Set_HtMpduDensity_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value <=7 && Value >= 0)
+ pAd->CommonCfg.BACapability.field.MpduDensity = Value;
+ else
+ pAd->CommonCfg.BACapability.field.MpduDensity = 4;
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity));
+
+ return TRUE;
+}
+
+INT Set_HtBaWinSize_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+
+ if (Value >=1 && Value <= 64)
+ {
+ pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
+ pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
+ }
+ else
+ {
+ pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
+ pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
+ }
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit));
+
+ return TRUE;
+}
+
+INT Set_HtRdg_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value == 0)
+ pAd->CommonCfg.bRdg = FALSE;
+ else if ( Value ==1 )
+ {
+ pAd->HTCEnable = TRUE;
+ pAd->CommonCfg.bRdg = TRUE;
+ }
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg));
+
+ return TRUE;
+}
+
+INT Set_HtLinkAdapt_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->bLinkAdapt = FALSE;
+ else if ( Value ==1 )
+ {
+ pAd->HTCEnable = TRUE;
+ pAd->bLinkAdapt = TRUE;
+ }
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt));
+
+ return TRUE;
+}
+
+INT Set_HtAmsdu_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
+ else if ( Value == 1 )
+ pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable));
+
+ return TRUE;
+}
+
+INT Set_HtAutoBa_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ {
+ pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+ pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+ }
+ else if (Value == 1)
+ {
+ pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+ pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+ }
+ else
+ return FALSE; //Invalid argument
+
+ pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+ pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
+
+ return TRUE;
+
+}
+
+INT Set_HtProtect_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->CommonCfg.bHTProtect = FALSE;
+ else if (Value == 1)
+ pAd->CommonCfg.bHTProtect = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect));
+
+ return TRUE;
+}
+
+INT Set_SendPSMPAction_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR mac[6], mode;
+ char *token, sepValue[] = ":", DASH = '-';
+ INT i;
+ MAC_TABLE_ENTRY *pEntry;
+
+ //printk("\n%s\n", arg);
+/*
+ The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d,
+ =>The six 2 digit hex-decimal number previous are the Mac address,
+ =>The seventh decimal number is the mode value.
+*/
+ if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format.
+ return FALSE;
+
+ token = strchr(arg, DASH);
+ if ((token != NULL) && (strlen(token)>1))
+ {
+ mode = simple_strtol((token+1), 0, 10);
+ if (mode > MMPS_ENABLE)
+ return FALSE;
+
+ *token = '\0';
+ for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++)
+ {
+ if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1))))
+ return FALSE;
+ AtoH(token, (PUCHAR)(&mac[i]), 1);
+ }
+ if(i != 6)
+ return FALSE;
+
+ printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1],
+ mac[2], mac[3], mac[4], mac[5], mode);
+
+ pEntry = MacTableLookup(pAd, mac);
+
+ if (pEntry) {
+ printk("\nSendPSMPAction MIPS mode = %d\n", mode);
+ SendPSMPAction(pAd, pEntry->Aid, mode);
+ }
+
+ return TRUE;
+ }
+
+ return FALSE;
+
+
+}
+
+INT Set_HtMIMOPSmode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+ if (Value <=3 && Value >= 0)
+ pAd->CommonCfg.BACapability.field.MMPSmode = Value;
+ else
+ pAd->CommonCfg.BACapability.field.MMPSmode = 3;
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode));
+
+ return TRUE;
+}
+
+
+INT Set_ForceShortGI_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->WIFItestbed.bShortGI = FALSE;
+ else if (Value == 1)
+ pAd->WIFItestbed.bShortGI = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI));
+
+ return TRUE;
+}
+
+
+
+INT Set_ForceGF_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->WIFItestbed.bGreenField = FALSE;
+ else if (Value == 1)
+ pAd->WIFItestbed.bGreenField = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ SetCommonHT(pAd);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField));
+
+ return TRUE;
+}
+
+INT Set_HtMimoPs_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+ if (Value == 0)
+ pAd->CommonCfg.bMIMOPSEnable = FALSE;
+ else if (Value == 1)
+ pAd->CommonCfg.bMIMOPSEnable = TRUE;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable));
+
+ return TRUE;
+}
+#endif // DOT11_N_SUPPORT //
+
+
+#ifdef DOT11_N_SUPPORT
+INT SetCommonHT(
+ IN PRTMP_ADAPTER pAd)
+{
+ OID_SET_HT_PHYMODE SetHT;
+
+ if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
+ return FALSE;
+
+ SetHT.PhyMode = pAd->CommonCfg.PhyMode;
+ SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath);
+ SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE;
+ SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
+ SetHT.MCS = MCS_AUTO;
+ SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW;
+ SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC;
+ SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI;
+
+ RTMPSetHT(pAd, &SetHT);
+
+ return TRUE;
+}
+#endif // DOT11_N_SUPPORT //
+
+INT Set_FixedTxMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ UCHAR fix_tx_mode = FIXED_TXMODE_HT;
+
+ if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0)
+ {
+ fix_tx_mode = FIXED_TXMODE_OFDM;
+ }
+ else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0)
+ {
+ fix_tx_mode = FIXED_TXMODE_CCK;
+ }
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
+#endif // CONFIG_STA_SUPPORT //
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
+
+ return TRUE;
+}
+
+#ifdef CONFIG_APSTA_MIXED_SUPPORT
+INT Set_OpMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ ULONG Value;
+
+ Value = simple_strtol(arg, 0, 10);
+
+#ifdef RT2870
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
+#endif // RT2870 //
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n"));
+ return FALSE;
+ }
+
+ if (Value == 0)
+ pAd->OpMode = OPMODE_STA;
+ else if (Value == 1)
+ pAd->OpMode = OPMODE_AP;
+ else
+ return FALSE; //Invalid argument
+
+ DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode"));
+
+ return TRUE;
+}
+#endif // CONFIG_APSTA_MIXED_SUPPORT //
+
+
+/////////////////////////////////////////////////////////////////////////
+PCHAR RTMPGetRalinkAuthModeStr(
+ IN NDIS_802_11_AUTHENTICATION_MODE authMode)
+{
+ switch(authMode)
+ {
+ case Ndis802_11AuthModeOpen:
+ return "OPEN";
+ default:
+ case Ndis802_11AuthModeWPAPSK:
+ return "WPAPSK";
+ case Ndis802_11AuthModeShared:
+ return "SHARED";
+ case Ndis802_11AuthModeWPA:
+ return "WPA";
+ case Ndis802_11AuthModeWPA2:
+ return "WPA2";
+ case Ndis802_11AuthModeWPA2PSK:
+ return "WPA2PSK";
+ case Ndis802_11AuthModeWPA1PSKWPA2PSK:
+ return "WPAPSKWPA2PSK";
+ case Ndis802_11AuthModeWPA1WPA2:
+ return "WPA1WPA2";
+ }
+}
+
+PCHAR RTMPGetRalinkEncryModeStr(
+ IN USHORT encryMode)
+{
+ switch(encryMode)
+ {
+ default:
+ case Ndis802_11WEPDisabled:
+ return "NONE";
+ case Ndis802_11WEPEnabled:
+ return "WEP";
+ case Ndis802_11Encryption2Enabled:
+ return "TKIP";
+ case Ndis802_11Encryption3Enabled:
+ return "AES";
+ case Ndis802_11Encryption4Enabled:
+ return "TKIPAES";
+ }
+}
+
+INT RTMPShowCfgValue(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR pName,
+ IN PUCHAR pBuf)
+{
+ INT Status = 0;
+
+ for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
+ {
+ if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name))
+ {
+ if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf))
+ Status = -EINVAL;
+ break; //Exit for loop.
+ }
+ }
+
+ if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL)
+ {
+ sprintf(pBuf, "\n");
+ for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++)
+ sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name);
+ }
+
+ return Status;
+}
+
+INT Show_SSID_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
+#endif // CONFIG_STA_SUPPORT //
+ return 0;
+}
+
+INT Show_WirelessMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.PhyMode)
+ {
+ case PHY_11BG_MIXED:
+ sprintf(pBuf, "\t11B/G");
+ break;
+ case PHY_11B:
+ sprintf(pBuf, "\t11B");
+ break;
+ case PHY_11A:
+ sprintf(pBuf, "\t11A");
+ break;
+ case PHY_11ABG_MIXED:
+ sprintf(pBuf, "\t11A/B/G");
+ break;
+ case PHY_11G:
+ sprintf(pBuf, "\t11G");
+ break;
+#ifdef DOT11_N_SUPPORT
+ case PHY_11ABGN_MIXED:
+ sprintf(pBuf, "\t11A/B/G/N");
+ break;
+ case PHY_11N_2_4G:
+ sprintf(pBuf, "\t11N only with 2.4G");
+ break;
+ case PHY_11GN_MIXED:
+ sprintf(pBuf, "\t11G/N");
+ break;
+ case PHY_11AN_MIXED:
+ sprintf(pBuf, "\t11A/N");
+ break;
+ case PHY_11BGN_MIXED:
+ sprintf(pBuf, "\t11B/G/N");
+ break;
+ case PHY_11AGN_MIXED:
+ sprintf(pBuf, "\t11A/G/N");
+ break;
+ case PHY_11N_5G:
+ sprintf(pBuf, "\t11N only with 5G");
+ break;
+#endif // DOT11_N_SUPPORT //
+ default:
+ sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode);
+ break;
+ }
+ return 0;
+}
+
+
+INT Show_TxBurst_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE");
+ return 0;
+}
+
+INT Show_TxPreamble_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.TxPreamble)
+ {
+ case Rt802_11PreambleShort:
+ sprintf(pBuf, "\tShort");
+ break;
+ case Rt802_11PreambleLong:
+ sprintf(pBuf, "\tLong");
+ break;
+ case Rt802_11PreambleAuto:
+ sprintf(pBuf, "\tAuto");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble);
+ break;
+ }
+
+ return 0;
+}
+
+INT Show_TxPower_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage);
+ return 0;
+}
+
+INT Show_Channel_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel);
+ return 0;
+}
+
+INT Show_BGProtection_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.UseBGProtection)
+ {
+ case 1: //Always On
+ sprintf(pBuf, "\tON");
+ break;
+ case 2: //Always OFF
+ sprintf(pBuf, "\tOFF");
+ break;
+ case 0: //AUTO
+ sprintf(pBuf, "\tAuto");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection);
+ break;
+ }
+ return 0;
+}
+
+INT Show_RTSThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold);
+ return 0;
+}
+
+INT Show_FragThreshold_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold);
+ return 0;
+}
+
+#ifdef DOT11_N_SUPPORT
+INT Show_HtBw_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
+ {
+ sprintf(pBuf, "\t40 MHz");
+ }
+ else
+ {
+ sprintf(pBuf, "\t20 MHz");
+ }
+ return 0;
+}
+
+INT Show_HtMcs_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
+#endif // CONFIG_STA_SUPPORT //
+ return 0;
+}
+
+INT Show_HtGi_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI)
+ {
+ case GI_400:
+ sprintf(pBuf, "\tGI_400");
+ break;
+ case GI_800:
+ sprintf(pBuf, "\tGI_800");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI);
+ break;
+ }
+ return 0;
+}
+
+INT Show_HtOpMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE)
+ {
+ case HTMODE_GF:
+ sprintf(pBuf, "\tGF");
+ break;
+ case HTMODE_MM:
+ sprintf(pBuf, "\tMM");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE);
+ break;
+ }
+ return 0;
+}
+
+INT Show_HtExtcha_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)
+ {
+ case EXTCHA_BELOW:
+ sprintf(pBuf, "\tBelow");
+ break;
+ case EXTCHA_ABOVE:
+ sprintf(pBuf, "\tAbove");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA);
+ break;
+ }
+ return 0;
+}
+
+
+INT Show_HtMpduDensity_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity);
+ return 0;
+}
+
+INT Show_HtBaWinSize_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit);
+ return 0;
+}
+
+INT Show_HtRdg_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE");
+ return 0;
+}
+
+INT Show_HtAmsdu_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE");
+ return 0;
+}
+
+INT Show_HtAutoBa_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE");
+ return 0;
+}
+#endif // DOT11_N_SUPPORT //
+
+INT Show_CountryRegion_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion);
+ return 0;
+}
+
+INT Show_CountryRegionABand_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand);
+ return 0;
+}
+
+INT Show_CountryCode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode);
+ return 0;
+}
+
+#ifdef AGGREGATION_SUPPORT
+INT Show_PktAggregate_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE");
+ return 0;
+}
+#endif // AGGREGATION_SUPPORT //
+
+#ifdef WMM_SUPPORT
+INT Show_WmmCapable_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
+#endif // CONFIG_STA_SUPPORT //
+
+ return 0;
+}
+#endif // WMM_SUPPORT //
+
+INT Show_IEEE80211H_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE");
+ return 0;
+}
+
+#ifdef CONFIG_STA_SUPPORT
+INT Show_NetworkType_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ switch(pAd->StaCfg.BssType)
+ {
+ case BSS_ADHOC:
+ sprintf(pBuf, "\tAdhoc");
+ break;
+ case BSS_INFRA:
+ sprintf(pBuf, "\tInfra");
+ break;
+ case BSS_ANY:
+ sprintf(pBuf, "\tAny");
+ break;
+ case BSS_MONITOR:
+ sprintf(pBuf, "\tMonitor");
+ break;
+ default:
+ sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType);
+ break;
+ }
+ return 0;
+}
+#endif // CONFIG_STA_SUPPORT //
+
+INT Show_AuthMode_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen;
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ AuthMode = pAd->StaCfg.AuthMode;
+#endif // CONFIG_STA_SUPPORT //
+
+ if ((AuthMode >= Ndis802_11AuthModeOpen) &&
+ (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
+ sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode));
+ else
+ sprintf(pBuf, "\tUnknow Value(%d)", AuthMode);
+
+ return 0;
+}
+
+INT Show_EncrypType_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled;
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ WepStatus = pAd->StaCfg.WepStatus;
+#endif // CONFIG_STA_SUPPORT //
+
+ if ((WepStatus >= Ndis802_11WEPEnabled) &&
+ (WepStatus <= Ndis802_11Encryption4KeyAbsent))
+ sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus));
+ else
+ sprintf(pBuf, "\tUnknow Value(%d)", WepStatus);
+
+ return 0;
+}
+
+INT Show_DefaultKeyID_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ UCHAR DefaultKeyId = 0;
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ DefaultKeyId = pAd->StaCfg.DefaultKeyId;
+#endif // CONFIG_STA_SUPPORT //
+
+ sprintf(pBuf, "\t%d", DefaultKeyId);
+
+ return 0;
+}
+
+INT Show_WepKey_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN INT KeyIdx,
+ OUT PUCHAR pBuf)
+{
+ UCHAR Key[16] = {0}, KeyLength = 0;
+ INT index = BSS0;
+
+ KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen;
+ NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength);
+
+ //check key string is ASCII or not
+ if (RTMPCheckStrPrintAble(Key, KeyLength))
+ sprintf(pBuf, "\t%s", Key);
+ else
+ {
+ int idx;
+ sprintf(pBuf, "\t");
+ for (idx = 0; idx < KeyLength; idx++)
+ sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]);
+ }
+ return 0;
+}
+
+INT Show_Key1_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ Show_WepKey_Proc(pAd, 0, pBuf);
+ return 0;
+}
+
+INT Show_Key2_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ Show_WepKey_Proc(pAd, 1, pBuf);
+ return 0;
+}
+
+INT Show_Key3_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ Show_WepKey_Proc(pAd, 2, pBuf);
+ return 0;
+}
+
+INT Show_Key4_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ Show_WepKey_Proc(pAd, 3, pBuf);
+ return 0;
+}
+
+INT Show_WPAPSK_Proc(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUCHAR pBuf)
+{
+ INT idx;
+ UCHAR PMK[32] = {0};
+
+
+#ifdef CONFIG_STA_SUPPORT
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
+#endif // CONFIG_STA_SUPPORT //
+
+ sprintf(pBuf, "\tPMK = ");
+ for (idx = 0; idx < 32; idx++)
+ sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]);
+
+ return 0;
+}
+
projects / linux-2.6-omap-h63xx.git / blobdiff