char *mac = ""; // default 00:00:00:00:00:00
char *hostname = ""; // default CMPC
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,12)
-MODULE_PARM (mac, "s");
-#else
module_param (mac, charp, 0);
-#endif
MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr");
#endif // DOT11_N_SUPPORT //
extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
-#ifdef RT2860
extern void init_thread_task(PRTMP_ADAPTER pAd);
-#endif // RT2860 //
// public function prototype
INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
static int rt28xx_init(IN struct net_device *net_dev);
INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev);
-#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1
-struct net_device *alloc_netdev(
- int sizeof_priv,
- const char *mask,
- void (*setup)(struct net_device *));
-#endif // LINUX_VERSION_CODE //
-
static void CfgInitHook(PRTMP_ADAPTER pAd);
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
-#ifdef RT2860
- RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
-#endif // RT2860 //
-
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
+ RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) ||
+ RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
{
- AsicForceWakeup(pAd, TRUE);
+ AsicForceWakeup(pAd, RTMP_HALT);
}
#ifdef QOS_DLS_SUPPORT
#endif // WPA_SUPPLICANT_SUPPORT //
MlmeRadioOff(pAd);
-#ifdef RT2860
pAd->bPCIclkOff = FALSE;
-#endif // RT2860 //
}
#endif // CONFIG_STA_SUPPORT //
TpcReqTabExit(pAd);
-#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
RT28XX_IRQ_RELEASE(net_dev)
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
-#endif // RT2860 //
// Free Ring or USB buffers
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
-#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
}
-#endif // RT2860 //
Status = RTMPAllocTxRxRingMemory(pAd);
if (Status != NDIS_STATUS_SUCCESS)
#endif // WIRELESS_EXT >= 12 //
#endif // CONFIG_APSTA_MIXED_SUPPORT //
-#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
- IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
- {
- // If dirver doesn't wake up firmware here,
- // NICLoadFirmware will hang forever when interface is up again.
- // RT2860 PCI
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
- OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- AUTO_WAKEUP_STRUC AutoWakeupCfg;
- AsicForceWakeup(pAd, TRUE);
- AutoWakeupCfg.word = 0;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- }
- }
-#endif // RT2860 //
-#endif // CONFIG_STA_SUPPORT //
-
// Init
pObj = (POS_COOKIE)pAd->OS_Cookie;
}
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
return (retval);
dev->stop = MainVirtualIF_close; //rt28xx_close;
dev->priv_flags = INT_MAIN;
dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->validate_addr = NULL;
// find available device name
for (i = 0; i < 8; i++)
{
#endif // MULTIPLE_CARD_SUPPORT //
sprintf(slot_name, "ra%d", i);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
- device = dev_get_by_name(dev_net(dev), slot_name);
-#else
- device = dev_get_by_name(dev->nd_net, slot_name);
-#endif
-#else
- device = dev_get_by_name(slot_name);
-#endif
- if (device != NULL) dev_put(device);
-#else
- for (device = dev_base; device != NULL; device = device->next)
- {
- if (strncmp(device->name, slot_name, 4) == 0)
- break;
- }
-#endif
- if(device == NULL)
+ device = dev_get_by_name(dev_net(dev), slot_name);
+ if (device != NULL)
+ dev_put(device);
+
+ if (device == NULL)
break;
}
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL;
INT status;
PVOID handle;
-#ifdef RT2860
struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
-#endif // RT2860 //
#ifdef CONFIG_STA_SUPPORT
DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
#endif // CONFIG_STA_SUPPORT //
-#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1
- net_dev = alloc_netdev(sizeof(PRTMP_ADAPTER), "eth%d", ether_setup);
-#else
net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
-#endif
if (net_dev == NULL)
{
printk("alloc_netdev failed\n");
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
- module_put(THIS_MODULE);
-#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-#else
- MOD_DEC_USE_COUNT;
-#endif
goto err_out;
}
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
- SET_MODULE_OWNER(net_dev);
-#endif
-
netif_stop_queue(net_dev);
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
/* for supporting Network Manager */
/* Set the sysfs physical device reference for the network logical device
* if set prior to registration will cause a symlink during initialization.
*/
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
SET_NETDEV_DEV(net_dev, &(dev_p->dev));
-#endif
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
// Allocate RTMP_ADAPTER miniport adapter structure
#endif // CONFIG_STA_SUPPORT //
// Post config
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- if (RT28XXProbePostConfig(_dev_p, pAd, argc) == FALSE)
- goto err_out_unmap;
-#else
if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
goto err_out_unmap;
-#endif // LINUX_VERSION_CODE //
#ifdef CONFIG_STA_SUPPORT
pAd->OpMode = OPMODE_STA;
RT28XX_UNMAP();
err_out_free_netdev:
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- free_netdev(net_dev);
-#else
- kfree(net_dev);
-#endif
+ free_netdev(net_dev);
err_out:
RT28XX_PUT_DEVICE(dev_p);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
- return (LONG)NULL;
-#else
- return -ENODEV; /* probe fail */
-#endif // LINUX_VERSION_CODE //
+ return -ENODEV; /* probe fail */
} /* End of rt28xx_probe */
-#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1
-struct net_device *alloc_netdev(
- int sizeof_priv,
- const char *mask,
- void (*setup)(struct net_device *))
-{
- struct net_device *dev;
- INT alloc_size;
-
-
- /* ensure 32-byte alignment of the private area */
- alloc_size = sizeof (*dev) + sizeof_priv + 31;
-
- dev = (struct net_device *) kmalloc(alloc_size, GFP_KERNEL);
- if (dev == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR,
- ("alloc_netdev: Unable to allocate device memory.\n"));
- return NULL;
- }
-
- memset(dev, 0, alloc_size);
-
- if (sizeof_priv)
- dev->priv = (void *) (((long)(dev + 1) + 31) & ~31);
-
- setup(dev);
- strcpy(dev->name, mask);
-
- return dev;
-}
-#endif // LINUX_VERSION_CODE //
-
-
void CfgInitHook(PRTMP_ADAPTER pAd)
{
pAd->bBroadComHT = TRUE;
projects / linux-2.6-omap-h63xx.git / blobdiff