LAS0 Runtime Area
Local Address Space 0 Offset Read Function Write Function
*/
-#define LAS0_SPARE_00 0x0000 // - -
-#define LAS0_SPARE_04 0x0004 // - -
-#define LAS0_USER_IO 0x0008 // Read User Inputs Write User Outputs
-#define LAS0_SPARE_0C 0x000C // - -
-#define LAS0_ADC 0x0010 // Read FIFO Status Software A/D Start
-#define LAS0_DAC1 0x0014 // - Software D/A1 Update
-#define LAS0_DAC2 0x0018 // - Software D/A2 Update
-#define LAS0_SPARE_1C 0x001C // - -
-#define LAS0_SPARE_20 0x0020 // - -
-#define LAS0_DAC 0x0024 // - Software Simultaneous D/A1 and D/A2 Update
-#define LAS0_PACER 0x0028 // Software Pacer Start Software Pacer Stop
-#define LAS0_TIMER 0x002C // Read Timer Counters Status HDIN Software Trigger
-#define LAS0_IT 0x0030 // Read Interrupt Status Write Interrupt Enable Mask Register
-#define LAS0_CLEAR 0x0034 // Clear ITs set by Clear Mask Set Interrupt Clear Mask
-#define LAS0_OVERRUN 0x0038 // Read pending interrupts Clear Overrun Register
-#define LAS0_SPARE_3C 0x003C // - -
+#define LAS0_SPARE_00 0x0000 /* - - */
+#define LAS0_SPARE_04 0x0004 /* - - */
+#define LAS0_USER_IO 0x0008 /* Read User Inputs Write User Outputs */
+#define LAS0_SPARE_0C 0x000C /* - - */
+#define LAS0_ADC 0x0010 /* Read FIFO Status Software A/D Start */
+#define LAS0_DAC1 0x0014 /* - Software D/A1 Update */
+#define LAS0_DAC2 0x0018 /* - Software D/A2 Update */
+#define LAS0_SPARE_1C 0x001C /* - - */
+#define LAS0_SPARE_20 0x0020 /* - - */
+#define LAS0_DAC 0x0024 /* - Software Simultaneous D/A1 and D/A2 Update */
+#define LAS0_PACER 0x0028 /* Software Pacer Start Software Pacer Stop */
+#define LAS0_TIMER 0x002C /* Read Timer Counters Status HDIN Software Trigger */
+#define LAS0_IT 0x0030 /* Read Interrupt Status Write Interrupt Enable Mask Register */
+#define LAS0_CLEAR 0x0034 /* Clear ITs set by Clear Mask Set Interrupt Clear Mask */
+#define LAS0_OVERRUN 0x0038 /* Read pending interrupts Clear Overrun Register */
+#define LAS0_SPARE_3C 0x003C /* - - */
/*
LAS0 Runtime Area Timer/Counter,Dig.IO
Name Local Address Function
*/
-#define LAS0_PCLK 0x0040 // Pacer Clock value (24bit) Pacer Clock load (24bit)
-#define LAS0_BCLK 0x0044 // Burst Clock value (10bit) Burst Clock load (10bit)
-#define LAS0_ADC_SCNT 0x0048 // A/D Sample counter value (10bit) A/D Sample counter load (10bit)
-#define LAS0_DAC1_UCNT 0x004C // D/A1 Update counter value (10 bit) D/A1 Update counter load (10bit)
-#define LAS0_DAC2_UCNT 0x0050 // D/A2 Update counter value (10 bit) D/A2 Update counter load (10bit)
-#define LAS0_DCNT 0x0054 // Delay counter value (16 bit) Delay counter load (16bit)
-#define LAS0_ACNT 0x0058 // About counter value (16 bit) About counter load (16bit)
-#define LAS0_DAC_CLK 0x005C // DAC clock value (16bit) DAC clock load (16bit)
-#define LAS0_UTC0 0x0060 // 8254 TC Counter 0 User TC 0 value Load count in TC Counter 0
-#define LAS0_UTC1 0x0064 // 8254 TC Counter 1 User TC 1 value Load count in TC Counter 1
-#define LAS0_UTC2 0x0068 // 8254 TC Counter 2 User TC 2 value Load count in TC Counter 2
-#define LAS0_UTC_CTRL 0x006C // 8254 TC Control Word Program counter mode for TC
-#define LAS0_DIO0 0x0070 // Digital I/O Port 0 Read Port Digital I/O Port 0 Write Port
-#define LAS0_DIO1 0x0074 // Digital I/O Port 1 Read Port Digital I/O Port 1 Write Port
-#define LAS0_DIO0_CTRL 0x0078 // Clear digital IRQ status flag/read Clear digital chip/program Port 0
-#define LAS0_DIO_STATUS 0x007C // Read Digital I/O Status word Program digital control register &
+#define LAS0_PCLK 0x0040 /* Pacer Clock value (24bit) Pacer Clock load (24bit) */
+#define LAS0_BCLK 0x0044 /* Burst Clock value (10bit) Burst Clock load (10bit) */
+#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter value (10bit) A/D Sample counter load (10bit) */
+#define LAS0_DAC1_UCNT 0x004C /* D/A1 Update counter value (10 bit) D/A1 Update counter load (10bit) */
+#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter value (10 bit) D/A2 Update counter load (10bit) */
+#define LAS0_DCNT 0x0054 /* Delay counter value (16 bit) Delay counter load (16bit) */
+#define LAS0_ACNT 0x0058 /* About counter value (16 bit) About counter load (16bit) */
+#define LAS0_DAC_CLK 0x005C /* DAC clock value (16bit) DAC clock load (16bit) */
+#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 User TC 0 value Load count in TC Counter 0 */
+#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 User TC 1 value Load count in TC Counter 1 */
+#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 User TC 2 value Load count in TC Counter 2 */
+#define LAS0_UTC_CTRL 0x006C /* 8254 TC Control Word Program counter mode for TC */
+#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 Read Port Digital I/O Port 0 Write Port */
+#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 Read Port Digital I/O Port 1 Write Port */
+#define LAS0_DIO0_CTRL 0x0078 /* Clear digital IRQ status flag/read Clear digital chip/program Port 0 */
+#define LAS0_DIO_STATUS 0x007C /* Read Digital I/O Status word Program digital control register & */
/*
LAS0 Setup Area
Name Local Address Function
*/
-#define LAS0_BOARD_RESET 0x0100 // Board reset
-#define LAS0_DMA0_SRC 0x0104 // DMA 0 Sources select
-#define LAS0_DMA1_SRC 0x0108 // DMA 1 Sources select
-#define LAS0_ADC_CONVERSION 0x010C // A/D Conversion Signal select
-#define LAS0_BURST_START 0x0110 // Burst Clock Start Trigger select
-#define LAS0_PACER_START 0x0114 // Pacer Clock Start Trigger select
-#define LAS0_PACER_STOP 0x0118 // Pacer Clock Stop Trigger select
-#define LAS0_ACNT_STOP_ENABLE 0x011C // About Counter Stop Enable
-#define LAS0_PACER_REPEAT 0x0120 // Pacer Start Trigger Mode select
-#define LAS0_DIN_START 0x0124 // High Speed Digital Input Sampling Signal select
-#define LAS0_DIN_FIFO_CLEAR 0x0128 // Digital Input FIFO Clear
-#define LAS0_ADC_FIFO_CLEAR 0x012C // A/D FIFO Clear
-#define LAS0_CGT_WRITE 0x0130 // Channel Gain Table Write
-#define LAS0_CGL_WRITE 0x0134 // Channel Gain Latch Write
-#define LAS0_CG_DATA 0x0138 // Digital Table Write
-#define LAS0_CGT_ENABLE 0x013C // Channel Gain Table Enable
-#define LAS0_CG_ENABLE 0x0140 // Digital Table Enable
-#define LAS0_CGT_PAUSE 0x0144 // Table Pause Enable
-#define LAS0_CGT_RESET 0x0148 // Reset Channel Gain Table
-#define LAS0_CGT_CLEAR 0x014C // Clear Channel Gain Table
-#define LAS0_DAC1_CTRL 0x0150 // D/A1 output type/range
-#define LAS0_DAC1_SRC 0x0154 // D/A1 update source
-#define LAS0_DAC1_CYCLE 0x0158 // D/A1 cycle mode
-#define LAS0_DAC1_RESET 0x015C // D/A1 FIFO reset
-#define LAS0_DAC1_FIFO_CLEAR 0x0160 // D/A1 FIFO clear
-#define LAS0_DAC2_CTRL 0x0164 // D/A2 output type/range
-#define LAS0_DAC2_SRC 0x0168 // D/A2 update source
-#define LAS0_DAC2_CYCLE 0x016C // D/A2 cycle mode
-#define LAS0_DAC2_RESET 0x0170 // D/A2 FIFO reset
-#define LAS0_DAC2_FIFO_CLEAR 0x0174 // D/A2 FIFO clear
-#define LAS0_ADC_SCNT_SRC 0x0178 // A/D Sample Counter Source select
-#define LAS0_PACER_SELECT 0x0180 // Pacer Clock select
-#define LAS0_SBUS0_SRC 0x0184 // SyncBus 0 Source select
-#define LAS0_SBUS0_ENABLE 0x0188 // SyncBus 0 enable
-#define LAS0_SBUS1_SRC 0x018C // SyncBus 1 Source select
-#define LAS0_SBUS1_ENABLE 0x0190 // SyncBus 1 enable
-#define LAS0_SBUS2_SRC 0x0198 // SyncBus 2 Source select
-#define LAS0_SBUS2_ENABLE 0x019C // SyncBus 2 enable
-#define LAS0_ETRG_POLARITY 0x01A4 // External Trigger polarity select
-#define LAS0_EINT_POLARITY 0x01A8 // External Interrupt polarity select
-#define LAS0_UTC0_CLOCK 0x01AC // UTC0 Clock select
-#define LAS0_UTC0_GATE 0x01B0 // UTC0 Gate select
-#define LAS0_UTC1_CLOCK 0x01B4 // UTC1 Clock select
-#define LAS0_UTC1_GATE 0x01B8 // UTC1 Gate select
-#define LAS0_UTC2_CLOCK 0x01BC // UTC2 Clock select
-#define LAS0_UTC2_GATE 0x01C0 // UTC2 Gate select
-#define LAS0_UOUT0_SELECT 0x01C4 // User Output 0 source select
-#define LAS0_UOUT1_SELECT 0x01C8 // User Output 1 source select
-#define LAS0_DMA0_RESET 0x01CC // DMA0 Request state machine reset
-#define LAS0_DMA1_RESET 0x01D0 // DMA1 Request state machine reset
+#define LAS0_BOARD_RESET 0x0100 /* Board reset */
+#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
+#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
+#define LAS0_ADC_CONVERSION 0x010C /* A/D Conversion Signal select */
+#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
+#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
+#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
+#define LAS0_ACNT_STOP_ENABLE 0x011C /* About Counter Stop Enable */
+#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
+#define LAS0_DIN_START 0x0124 /* High Speed Digital Input Sampling Signal select */
+#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
+#define LAS0_ADC_FIFO_CLEAR 0x012C /* A/D FIFO Clear */
+#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
+#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
+#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
+#define LAS0_CGT_ENABLE 0x013C /* Channel Gain Table Enable */
+#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
+#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
+#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
+#define LAS0_CGT_CLEAR 0x014C /* Clear Channel Gain Table */
+#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
+#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
+#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
+#define LAS0_DAC1_RESET 0x015C /* D/A1 FIFO reset */
+#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
+#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
+#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
+#define LAS0_DAC2_CYCLE 0x016C /* D/A2 cycle mode */
+#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
+#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
+#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
+#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
+#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
+#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
+#define LAS0_SBUS1_SRC 0x018C /* SyncBus 1 Source select */
+#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
+#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
+#define LAS0_SBUS2_ENABLE 0x019C /* SyncBus 2 enable */
+#define LAS0_ETRG_POLARITY 0x01A4 /* External Trigger polarity select */
+#define LAS0_EINT_POLARITY 0x01A8 /* External Interrupt polarity select */
+#define LAS0_UTC0_CLOCK 0x01AC /* UTC0 Clock select */
+#define LAS0_UTC0_GATE 0x01B0 /* UTC0 Gate select */
+#define LAS0_UTC1_CLOCK 0x01B4 /* UTC1 Clock select */
+#define LAS0_UTC1_GATE 0x01B8 /* UTC1 Gate select */
+#define LAS0_UTC2_CLOCK 0x01BC /* UTC2 Clock select */
+#define LAS0_UTC2_GATE 0x01C0 /* UTC2 Gate select */
+#define LAS0_UOUT0_SELECT 0x01C4 /* User Output 0 source select */
+#define LAS0_UOUT1_SELECT 0x01C8 /* User Output 1 source select */
+#define LAS0_DMA0_RESET 0x01CC /* DMA0 Request state machine reset */
+#define LAS0_DMA1_RESET 0x01D0 /* DMA1 Request state machine reset */
/*
LAS1
Name Local Address Function
*/
-#define LAS1_ADC_FIFO 0x0000 // Read A/D FIFO (16bit) -
-#define LAS1_HDIO_FIFO 0x0004 // Read High Speed Digital Input FIFO (16bit) -
-#define LAS1_DAC1_FIFO 0x0008 // - Write D/A1 FIFO (16bit)
-#define LAS1_DAC2_FIFO 0x000C // - Write D/A2 FIFO (16bit)
+#define LAS1_ADC_FIFO 0x0000 /* Read A/D FIFO (16bit) - */
+#define LAS1_HDIO_FIFO 0x0004 /* Read High Speed Digital Input FIFO (16bit) - */
+#define LAS1_DAC1_FIFO 0x0008 /* - Write D/A1 FIFO (16bit) */
+#define LAS1_DAC2_FIFO 0x000C /* - Write D/A2 FIFO (16bit) */
/*
LCFG: PLX 9080 local config & runtime registers
Name Local Address Function
*/
-#define LCFG_ITCSR 0x0068 // INTCSR, Interrupt Control/Status Register
-#define LCFG_DMAMODE0 0x0080 // DMA Channel 0 Mode Register
-#define LCFG_DMAPADR0 0x0084 // DMA Channel 0 PCI Address Register
-#define LCFG_DMALADR0 0x0088 // DMA Channel 0 Local Address Reg
-#define LCFG_DMASIZ0 0x008C // DMA Channel 0 Transfer Size (Bytes) Register
-#define LCFG_DMADPR0 0x0090 // DMA Channel 0 Descriptor Pointer Register
-#define LCFG_DMAMODE1 0x0094 // DMA Channel 1 Mode Register
-#define LCFG_DMAPADR1 0x0098 // DMA Channel 1 PCI Address Register
-#define LCFG_DMALADR1 0x009C // DMA Channel 1 Local Address Register
-#define LCFG_DMASIZ1 0x00A0 // DMA Channel 1 Transfer Size (Bytes) Register
-#define LCFG_DMADPR1 0x00A4 // DMA Channel 1 Descriptor Pointer Register
-#define LCFG_DMACSR0 0x00A8 // DMA Channel 0 Command/Status Register
-#define LCFG_DMACSR1 0x00A9 // DMA Channel 0 Command/Status Register
-#define LCFG_DMAARB 0x00AC // DMA Arbitration Register
-#define LCFG_DMATHR 0x00B0 // DMA Threshold Register
+#define LCFG_ITCSR 0x0068 /* INTCSR, Interrupt Control/Status Register */
+#define LCFG_DMAMODE0 0x0080 /* DMA Channel 0 Mode Register */
+#define LCFG_DMAPADR0 0x0084 /* DMA Channel 0 PCI Address Register */
+#define LCFG_DMALADR0 0x0088 /* DMA Channel 0 Local Address Reg */
+#define LCFG_DMASIZ0 0x008C /* DMA Channel 0 Transfer Size (Bytes) Register */
+#define LCFG_DMADPR0 0x0090 /* DMA Channel 0 Descriptor Pointer Register */
+#define LCFG_DMAMODE1 0x0094 /* DMA Channel 1 Mode Register */
+#define LCFG_DMAPADR1 0x0098 /* DMA Channel 1 PCI Address Register */
+#define LCFG_DMALADR1 0x009C /* DMA Channel 1 Local Address Register */
+#define LCFG_DMASIZ1 0x00A0 /* DMA Channel 1 Transfer Size (Bytes) Register */
+#define LCFG_DMADPR1 0x00A4 /* DMA Channel 1 Descriptor Pointer Register */
+#define LCFG_DMACSR0 0x00A8 /* DMA Channel 0 Command/Status Register */
+#define LCFG_DMACSR1 0x00A9 /* DMA Channel 0 Command/Status Register */
+#define LCFG_DMAARB 0x00AC /* DMA Arbitration Register */
+#define LCFG_DMATHR 0x00B0 /* DMA Threshold Register */
/*======================================================================
Resister bit definitions
======================================================================*/
-// FIFO Status Word Bits (RtdFifoStatus)
-#define FS_DAC1_NOT_EMPTY 0x0001 // D0 - DAC1 FIFO not empty
-#define FS_DAC1_HEMPTY 0x0002 // D1 - DAC1 FIFO half empty
-#define FS_DAC1_NOT_FULL 0x0004 // D2 - DAC1 FIFO not full
-#define FS_DAC2_NOT_EMPTY 0x0010 // D4 - DAC2 FIFO not empty
-#define FS_DAC2_HEMPTY 0x0020 // D5 - DAC2 FIFO half empty
-#define FS_DAC2_NOT_FULL 0x0040 // D6 - DAC2 FIFO not full
-#define FS_ADC_NOT_EMPTY 0x0100 // D8 - ADC FIFO not empty
-#define FS_ADC_HEMPTY 0x0200 // D9 - ADC FIFO half empty
-#define FS_ADC_NOT_FULL 0x0400 // D10 - ADC FIFO not full
-#define FS_DIN_NOT_EMPTY 0x1000 // D12 - DIN FIFO not empty
-#define FS_DIN_HEMPTY 0x2000 // D13 - DIN FIFO half empty
-#define FS_DIN_NOT_FULL 0x4000 // D14 - DIN FIFO not full
-
-// Timer Status Word Bits (GetTimerStatus)
+/* FIFO Status Word Bits (RtdFifoStatus) */
+#define FS_DAC1_NOT_EMPTY 0x0001 /* D0 - DAC1 FIFO not empty */
+#define FS_DAC1_HEMPTY 0x0002 /* D1 - DAC1 FIFO half empty */
+#define FS_DAC1_NOT_FULL 0x0004 /* D2 - DAC1 FIFO not full */
+#define FS_DAC2_NOT_EMPTY 0x0010 /* D4 - DAC2 FIFO not empty */
+#define FS_DAC2_HEMPTY 0x0020 /* D5 - DAC2 FIFO half empty */
+#define FS_DAC2_NOT_FULL 0x0040 /* D6 - DAC2 FIFO not full */
+#define FS_ADC_NOT_EMPTY 0x0100 /* D8 - ADC FIFO not empty */
+#define FS_ADC_HEMPTY 0x0200 /* D9 - ADC FIFO half empty */
+#define FS_ADC_NOT_FULL 0x0400 /* D10 - ADC FIFO not full */
+#define FS_DIN_NOT_EMPTY 0x1000 /* D12 - DIN FIFO not empty */
+#define FS_DIN_HEMPTY 0x2000 /* D13 - DIN FIFO half empty */
+#define FS_DIN_NOT_FULL 0x4000 /* D14 - DIN FIFO not full */
+
+/* Timer Status Word Bits (GetTimerStatus) */
#define TS_PCLK_GATE 0x0001
-// D0 - Pacer Clock Gate [0 - gated, 1 - enabled]
+/* D0 - Pacer Clock Gate [0 - gated, 1 - enabled] */
#define TS_BCLK_GATE 0x0002
-// D1 - Burst Clock Gate [0 - disabled, 1 - running]
+/* D1 - Burst Clock Gate [0 - disabled, 1 - running] */
#define TS_DCNT_GATE 0x0004
-// D2 - Pacer Clock Delayed Start Trigger [0 - delay over, 1 - delay in
-// progress]
+/* D2 - Pacer Clock Delayed Start Trigger [0 - delay over, 1 - delay in */
+/* progress] */
#define TS_ACNT_GATE 0x0008
-// D3 - Pacer Clock About Trigger [0 - completed, 1 - in progress]
+/* D3 - Pacer Clock About Trigger [0 - completed, 1 - in progress] */
#define TS_PCLK_RUN 0x0010
-// D4 - Pacer Clock Shutdown Flag [0 - Pacer Clock cannot be start
-// triggered only by Software Pacer Start Command, 1 - Pacer Clock can
-// be start triggered]
-
-// External Trigger polarity select
-// External Interrupt polarity select
-#define POL_POSITIVE 0x0 // positive edge
-#define POL_NEGATIVE 0x1 // negative edge
-
-// User Output Signal select (SetUout0Source, SetUout1Source)
-#define UOUT_ADC 0x0 // A/D Conversion Signal
-#define UOUT_DAC1 0x1 // D/A1 Update
-#define UOUT_DAC2 0x2 // D/A2 Update
-#define UOUT_SOFTWARE 0x3 // Software Programmable
-
-// Pacer clock select (SetPacerSource)
-#define PCLK_INTERNAL 1 // Internal Pacer Clock
-#define PCLK_EXTERNAL 0 // External Pacer Clock
-
-// A/D Sample Counter Sources (SetAdcntSource, SetupSampleCounter)
-#define ADC_SCNT_CGT_RESET 0x0 // needs restart with StartPacer
+/* D4 - Pacer Clock Shutdown Flag [0 - Pacer Clock cannot be start */
+/* triggered only by Software Pacer Start Command, 1 - Pacer Clock can */
+/* be start triggered] */
+
+/* External Trigger polarity select */
+/* External Interrupt polarity select */
+#define POL_POSITIVE 0x0 /* positive edge */
+#define POL_NEGATIVE 0x1 /* negative edge */
+
+/* User Output Signal select (SetUout0Source, SetUout1Source) */
+#define UOUT_ADC 0x0 /* A/D Conversion Signal */
+#define UOUT_DAC1 0x1 /* D/A1 Update */
+#define UOUT_DAC2 0x2 /* D/A2 Update */
+#define UOUT_SOFTWARE 0x3 /* Software Programmable */
+
+/* Pacer clock select (SetPacerSource) */
+#define PCLK_INTERNAL 1 /* Internal Pacer Clock */
+#define PCLK_EXTERNAL 0 /* External Pacer Clock */
+
+/* A/D Sample Counter Sources (SetAdcntSource, SetupSampleCounter) */
+#define ADC_SCNT_CGT_RESET 0x0 /* needs restart with StartPacer */
#define ADC_SCNT_FIFO_WRITE 0x1
-// A/D Conversion Signal Select (for SetConversionSelect)
-#define ADC_START_SOFTWARE 0x0 // Software A/D Start
-#define ADC_START_PCLK 0x1 // Pacer Clock (Ext. Int. see Func.509)
-#define ADC_START_BCLK 0x2 // Burst Clock
-#define ADC_START_DIGITAL_IT 0x3 // Digital Interrupt
-#define ADC_START_DAC1_MARKER1 0x4 // D/A 1 Data Marker 1
-#define ADC_START_DAC2_MARKER1 0x5 // D/A 2 Data Marker 1
-#define ADC_START_SBUS0 0x6 // SyncBus 0
-#define ADC_START_SBUS1 0x7 // SyncBus 1
-#define ADC_START_SBUS2 0x8 // SyncBus 2
-
-// Burst Clock start trigger select (SetBurstStart)
-#define BCLK_START_SOFTWARE 0x0 // Software A/D Start (StartBurst)
-#define BCLK_START_PCLK 0x1 // Pacer Clock
-#define BCLK_START_ETRIG 0x2 // External Trigger
-#define BCLK_START_DIGITAL_IT 0x3 // Digital Interrupt
-#define BCLK_START_SBUS0 0x4 // SyncBus 0
-#define BCLK_START_SBUS1 0x5 // SyncBus 1
-#define BCLK_START_SBUS2 0x6 // SyncBus 2
-
-// Pacer Clock start trigger select (SetPacerStart)
-#define PCLK_START_SOFTWARE 0x0 // Software Pacer Start (StartPacer)
-#define PCLK_START_ETRIG 0x1 // External trigger
-#define PCLK_START_DIGITAL_IT 0x2 // Digital interrupt
-#define PCLK_START_UTC2 0x3 // User TC 2 out
-#define PCLK_START_SBUS0 0x4 // SyncBus 0
-#define PCLK_START_SBUS1 0x5 // SyncBus 1
-#define PCLK_START_SBUS2 0x6 // SyncBus 2
-#define PCLK_START_D_SOFTWARE 0x8 // Delayed Software Pacer Start
-#define PCLK_START_D_ETRIG 0x9 // Delayed external trigger
-#define PCLK_START_D_DIGITAL_IT 0xA // Delayed digital interrupt
-#define PCLK_START_D_UTC2 0xB // Delayed User TC 2 out
-#define PCLK_START_D_SBUS0 0xC // Delayed SyncBus 0
-#define PCLK_START_D_SBUS1 0xD // Delayed SyncBus 1
-#define PCLK_START_D_SBUS2 0xE // Delayed SyncBus 2
-#define PCLK_START_ETRIG_GATED 0xF // External Trigger Gated controlled mode
-
-// Pacer Clock Stop Trigger select (SetPacerStop)
-#define PCLK_STOP_SOFTWARE 0x0 // Software Pacer Stop (StopPacer)
-#define PCLK_STOP_ETRIG 0x1 // External Trigger
-#define PCLK_STOP_DIGITAL_IT 0x2 // Digital Interrupt
-#define PCLK_STOP_ACNT 0x3 // About Counter
-#define PCLK_STOP_UTC2 0x4 // User TC2 out
-#define PCLK_STOP_SBUS0 0x5 // SyncBus 0
-#define PCLK_STOP_SBUS1 0x6 // SyncBus 1
-#define PCLK_STOP_SBUS2 0x7 // SyncBus 2
-#define PCLK_STOP_A_SOFTWARE 0x8 // About Software Pacer Stop
-#define PCLK_STOP_A_ETRIG 0x9 // About External Trigger
-#define PCLK_STOP_A_DIGITAL_IT 0xA // About Digital Interrupt
-#define PCLK_STOP_A_UTC2 0xC // About User TC2 out
-#define PCLK_STOP_A_SBUS0 0xD // About SyncBus 0
-#define PCLK_STOP_A_SBUS1 0xE // About SyncBus 1
-#define PCLK_STOP_A_SBUS2 0xF // About SyncBus 2
-
-// About Counter Stop Enable
-#define ACNT_STOP 0x0 // stop enable
-#define ACNT_NO_STOP 0x1 // stop disabled
-
-// DAC update source (SetDAC1Start & SetDAC2Start)
-#define DAC_START_SOFTWARE 0x0 // Software Update
-#define DAC_START_CGT 0x1 // CGT controlled Update
-#define DAC_START_DAC_CLK 0x2 // D/A Clock
-#define DAC_START_EPCLK 0x3 // External Pacer Clock
-#define DAC_START_SBUS0 0x4 // SyncBus 0
-#define DAC_START_SBUS1 0x5 // SyncBus 1
-#define DAC_START_SBUS2 0x6 // SyncBus 2
-
-// DAC Cycle Mode (SetDAC1Cycle, SetDAC2Cycle, SetupDAC)
-#define DAC_CYCLE_SINGLE 0x0 // not cycle
-#define DAC_CYCLE_MULTI 0x1 // cycle
-
-// 8254 Operation Modes (Set8254Mode, SetupTimerCounter)
-#define M8254_EVENT_COUNTER 0 // Event Counter
-#define M8254_HW_ONE_SHOT 1 // Hardware-Retriggerable One-Shot
-#define M8254_RATE_GENERATOR 2 // Rate Generator
-#define M8254_SQUARE_WAVE 3 // Square Wave Mode
-#define M8254_SW_STROBE 4 // Software Triggered Strobe
-#define M8254_HW_STROBE 5 // Hardware Triggered Strobe (Retriggerable)
-
-// User Timer/Counter 0 Clock Select (SetUtc0Clock)
-#define CUTC0_8MHZ 0x0 // 8MHz
-#define CUTC0_EXT_TC_CLOCK1 0x1 // Ext. TC Clock 1
-#define CUTC0_EXT_TC_CLOCK2 0x2 // Ext. TC Clock 2
-#define CUTC0_EXT_PCLK 0x3 // Ext. Pacer Clock
-
-// User Timer/Counter 1 Clock Select (SetUtc1Clock)
-#define CUTC1_8MHZ 0x0 // 8MHz
-#define CUTC1_EXT_TC_CLOCK1 0x1 // Ext. TC Clock 1
-#define CUTC1_EXT_TC_CLOCK2 0x2 // Ext. TC Clock 2
-#define CUTC1_EXT_PCLK 0x3 // Ext. Pacer Clock
-#define CUTC1_UTC0_OUT 0x4 // User Timer/Counter 0 out
-#define CUTC1_DIN_SIGNAL 0x5 // High-Speed Digital Input Sampling signal
-
-// User Timer/Counter 2 Clock Select (SetUtc2Clock)
-#define CUTC2_8MHZ 0x0 // 8MHz
-#define CUTC2_EXT_TC_CLOCK1 0x1 // Ext. TC Clock 1
-#define CUTC2_EXT_TC_CLOCK2 0x2 // Ext. TC Clock 2
-#define CUTC2_EXT_PCLK 0x3 // Ext. Pacer Clock
-#define CUTC2_UTC1_OUT 0x4 // User Timer/Counter 1 out
-
-// User Timer/Counter 0 Gate Select (SetUtc0Gate)
-#define GUTC0_NOT_GATED 0x0 // Not gated
-#define GUTC0_GATED 0x1 // Gated
-#define GUTC0_EXT_TC_GATE1 0x2 // Ext. TC Gate 1
-#define GUTC0_EXT_TC_GATE2 0x3 // Ext. TC Gate 2
-
-// User Timer/Counter 1 Gate Select (SetUtc1Gate)
-#define GUTC1_NOT_GATED 0x0 // Not gated
-#define GUTC1_GATED 0x1 // Gated
-#define GUTC1_EXT_TC_GATE1 0x2 // Ext. TC Gate 1
-#define GUTC1_EXT_TC_GATE2 0x3 // Ext. TC Gate 2
-#define GUTC1_UTC0_OUT 0x4 // User Timer/Counter 0 out
-
-// User Timer/Counter 2 Gate Select (SetUtc2Gate)
-#define GUTC2_NOT_GATED 0x0 // Not gated
-#define GUTC2_GATED 0x1 // Gated
-#define GUTC2_EXT_TC_GATE1 0x2 // Ext. TC Gate 1
-#define GUTC2_EXT_TC_GATE2 0x3 // Ext. TC Gate 2
-#define GUTC2_UTC1_OUT 0x4 // User Timer/Counter 1 out
-
-// Interrupt Source Masks (SetITMask, ClearITMask, GetITStatus)
-#define IRQM_ADC_FIFO_WRITE 0x0001 // ADC FIFO Write
-#define IRQM_CGT_RESET 0x0002 // Reset CGT
-#define IRQM_CGT_PAUSE 0x0008 // Pause CGT
-#define IRQM_ADC_ABOUT_CNT 0x0010 // About Counter out
-#define IRQM_ADC_DELAY_CNT 0x0020 // Delay Counter out
-#define IRQM_ADC_SAMPLE_CNT 0x0040 // ADC Sample Counter
-#define IRQM_DAC1_UCNT 0x0080 // DAC1 Update Counter
-#define IRQM_DAC2_UCNT 0x0100 // DAC2 Update Counter
-#define IRQM_UTC1 0x0200 // User TC1 out
-#define IRQM_UTC1_INV 0x0400 // User TC1 out, inverted
-#define IRQM_UTC2 0x0800 // User TC2 out
-#define IRQM_DIGITAL_IT 0x1000 // Digital Interrupt
-#define IRQM_EXTERNAL_IT 0x2000 // External Interrupt
-#define IRQM_ETRIG_RISING 0x4000 // External Trigger rising-edge
-#define IRQM_ETRIG_FALLING 0x8000 // External Trigger falling-edge
-
-// DMA Request Sources (LAS0)
-#define DMAS_DISABLED 0x0 // DMA Disabled
-#define DMAS_ADC_SCNT 0x1 // ADC Sample Counter
-#define DMAS_DAC1_UCNT 0x2 // D/A1 Update Counter
-#define DMAS_DAC2_UCNT 0x3 // D/A2 Update Counter
-#define DMAS_UTC1 0x4 // User TC1 out
-#define DMAS_ADFIFO_HALF_FULL 0x8 // A/D FIFO half full
-#define DMAS_DAC1_FIFO_HALF_EMPTY 0x9 // D/A1 FIFO half empty
-#define DMAS_DAC2_FIFO_HALF_EMPTY 0xA // D/A2 FIFO half empty
-
-// DMA Local Addresses (0x40000000+LAS1 offset)
-#define DMALADDR_ADC 0x40000000 // A/D FIFO
-#define DMALADDR_HDIN 0x40000004 // High Speed Digital Input FIFO
-#define DMALADDR_DAC1 0x40000008 // D/A1 FIFO
-#define DMALADDR_DAC2 0x4000000C // D/A2 FIFO
-
-// Port 0 compare modes (SetDIO0CompareMode)
-#define DIO_MODE_EVENT 0 // Event Mode
-#define DIO_MODE_MATCH 1 // Match Mode
-
-// Digital Table Enable (Port 1 disable)
-#define DTBL_DISABLE 0 // Enable Digital Table
-#define DTBL_ENABLE 1 // Disable Digital Table
-
-// Sampling Signal for High Speed Digital Input (SetHdinStart)
-#define HDIN_SOFTWARE 0x0 // Software Trigger
-#define HDIN_ADC 0x1 // A/D Conversion Signal
-#define HDIN_UTC0 0x2 // User TC out 0
-#define HDIN_UTC1 0x3 // User TC out 1
-#define HDIN_UTC2 0x4 // User TC out 2
-#define HDIN_EPCLK 0x5 // External Pacer Clock
-#define HDIN_ETRG 0x6 // External Trigger
-
-// Channel Gain Table / Channel Gain Latch
-#define CSC_LATCH 0 // Channel Gain Latch mode
-#define CSC_CGT 1 // Channel Gain Table mode
-
-// Channel Gain Table Pause Enable
-#define CGT_PAUSE_DISABLE 0 // Channel Gain Table Pause Disable
-#define CGT_PAUSE_ENABLE 1 // Channel Gain Table Pause Enable
-
-// DAC output type/range (p63)
-#define AOUT_UNIP5 0 // 0..+5 Volt
-#define AOUT_UNIP10 1 // 0..+10 Volt
-#define AOUT_BIP5 2 // -5..+5 Volt
-#define AOUT_BIP10 3 // -10..+10 Volt
-
-// Ghannel Gain Table field definitions (p61)
-// Gain
+/* A/D Conversion Signal Select (for SetConversionSelect) */
+#define ADC_START_SOFTWARE 0x0 /* Software A/D Start */
+#define ADC_START_PCLK 0x1 /* Pacer Clock (Ext. Int. see Func.509) */
+#define ADC_START_BCLK 0x2 /* Burst Clock */
+#define ADC_START_DIGITAL_IT 0x3 /* Digital Interrupt */
+#define ADC_START_DAC1_MARKER1 0x4 /* D/A 1 Data Marker 1 */
+#define ADC_START_DAC2_MARKER1 0x5 /* D/A 2 Data Marker 1 */
+#define ADC_START_SBUS0 0x6 /* SyncBus 0 */
+#define ADC_START_SBUS1 0x7 /* SyncBus 1 */
+#define ADC_START_SBUS2 0x8 /* SyncBus 2 */
+
+/* Burst Clock start trigger select (SetBurstStart) */
+#define BCLK_START_SOFTWARE 0x0 /* Software A/D Start (StartBurst) */
+#define BCLK_START_PCLK 0x1 /* Pacer Clock */
+#define BCLK_START_ETRIG 0x2 /* External Trigger */
+#define BCLK_START_DIGITAL_IT 0x3 /* Digital Interrupt */
+#define BCLK_START_SBUS0 0x4 /* SyncBus 0 */
+#define BCLK_START_SBUS1 0x5 /* SyncBus 1 */
+#define BCLK_START_SBUS2 0x6 /* SyncBus 2 */
+
+/* Pacer Clock start trigger select (SetPacerStart) */
+#define PCLK_START_SOFTWARE 0x0 /* Software Pacer Start (StartPacer) */
+#define PCLK_START_ETRIG 0x1 /* External trigger */
+#define PCLK_START_DIGITAL_IT 0x2 /* Digital interrupt */
+#define PCLK_START_UTC2 0x3 /* User TC 2 out */
+#define PCLK_START_SBUS0 0x4 /* SyncBus 0 */
+#define PCLK_START_SBUS1 0x5 /* SyncBus 1 */
+#define PCLK_START_SBUS2 0x6 /* SyncBus 2 */
+#define PCLK_START_D_SOFTWARE 0x8 /* Delayed Software Pacer Start */
+#define PCLK_START_D_ETRIG 0x9 /* Delayed external trigger */
+#define PCLK_START_D_DIGITAL_IT 0xA /* Delayed digital interrupt */
+#define PCLK_START_D_UTC2 0xB /* Delayed User TC 2 out */
+#define PCLK_START_D_SBUS0 0xC /* Delayed SyncBus 0 */
+#define PCLK_START_D_SBUS1 0xD /* Delayed SyncBus 1 */
+#define PCLK_START_D_SBUS2 0xE /* Delayed SyncBus 2 */
+#define PCLK_START_ETRIG_GATED 0xF /* External Trigger Gated controlled mode */
+
+/* Pacer Clock Stop Trigger select (SetPacerStop) */
+#define PCLK_STOP_SOFTWARE 0x0 /* Software Pacer Stop (StopPacer) */
+#define PCLK_STOP_ETRIG 0x1 /* External Trigger */
+#define PCLK_STOP_DIGITAL_IT 0x2 /* Digital Interrupt */
+#define PCLK_STOP_ACNT 0x3 /* About Counter */
+#define PCLK_STOP_UTC2 0x4 /* User TC2 out */
+#define PCLK_STOP_SBUS0 0x5 /* SyncBus 0 */
+#define PCLK_STOP_SBUS1 0x6 /* SyncBus 1 */
+#define PCLK_STOP_SBUS2 0x7 /* SyncBus 2 */
+#define PCLK_STOP_A_SOFTWARE 0x8 /* About Software Pacer Stop */
+#define PCLK_STOP_A_ETRIG 0x9 /* About External Trigger */
+#define PCLK_STOP_A_DIGITAL_IT 0xA /* About Digital Interrupt */
+#define PCLK_STOP_A_UTC2 0xC /* About User TC2 out */
+#define PCLK_STOP_A_SBUS0 0xD /* About SyncBus 0 */
+#define PCLK_STOP_A_SBUS1 0xE /* About SyncBus 1 */
+#define PCLK_STOP_A_SBUS2 0xF /* About SyncBus 2 */
+
+/* About Counter Stop Enable */
+#define ACNT_STOP 0x0 /* stop enable */
+#define ACNT_NO_STOP 0x1 /* stop disabled */
+
+/* DAC update source (SetDAC1Start & SetDAC2Start) */
+#define DAC_START_SOFTWARE 0x0 /* Software Update */
+#define DAC_START_CGT 0x1 /* CGT controlled Update */
+#define DAC_START_DAC_CLK 0x2 /* D/A Clock */
+#define DAC_START_EPCLK 0x3 /* External Pacer Clock */
+#define DAC_START_SBUS0 0x4 /* SyncBus 0 */
+#define DAC_START_SBUS1 0x5 /* SyncBus 1 */
+#define DAC_START_SBUS2 0x6 /* SyncBus 2 */
+
+/* DAC Cycle Mode (SetDAC1Cycle, SetDAC2Cycle, SetupDAC) */
+#define DAC_CYCLE_SINGLE 0x0 /* not cycle */
+#define DAC_CYCLE_MULTI 0x1 /* cycle */
+
+/* 8254 Operation Modes (Set8254Mode, SetupTimerCounter) */
+#define M8254_EVENT_COUNTER 0 /* Event Counter */
+#define M8254_HW_ONE_SHOT 1 /* Hardware-Retriggerable One-Shot */
+#define M8254_RATE_GENERATOR 2 /* Rate Generator */
+#define M8254_SQUARE_WAVE 3 /* Square Wave Mode */
+#define M8254_SW_STROBE 4 /* Software Triggered Strobe */
+#define M8254_HW_STROBE 5 /* Hardware Triggered Strobe (Retriggerable) */
+
+/* User Timer/Counter 0 Clock Select (SetUtc0Clock) */
+#define CUTC0_8MHZ 0x0 /* 8MHz */
+#define CUTC0_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
+#define CUTC0_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
+#define CUTC0_EXT_PCLK 0x3 /* Ext. Pacer Clock */
+
+/* User Timer/Counter 1 Clock Select (SetUtc1Clock) */
+#define CUTC1_8MHZ 0x0 /* 8MHz */
+#define CUTC1_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
+#define CUTC1_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
+#define CUTC1_EXT_PCLK 0x3 /* Ext. Pacer Clock */
+#define CUTC1_UTC0_OUT 0x4 /* User Timer/Counter 0 out */
+#define CUTC1_DIN_SIGNAL 0x5 /* High-Speed Digital Input Sampling signal */
+
+/* User Timer/Counter 2 Clock Select (SetUtc2Clock) */
+#define CUTC2_8MHZ 0x0 /* 8MHz */
+#define CUTC2_EXT_TC_CLOCK1 0x1 /* Ext. TC Clock 1 */
+#define CUTC2_EXT_TC_CLOCK2 0x2 /* Ext. TC Clock 2 */
+#define CUTC2_EXT_PCLK 0x3 /* Ext. Pacer Clock */
+#define CUTC2_UTC1_OUT 0x4 /* User Timer/Counter 1 out */
+
+/* User Timer/Counter 0 Gate Select (SetUtc0Gate) */
+#define GUTC0_NOT_GATED 0x0 /* Not gated */
+#define GUTC0_GATED 0x1 /* Gated */
+#define GUTC0_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
+#define GUTC0_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
+
+/* User Timer/Counter 1 Gate Select (SetUtc1Gate) */
+#define GUTC1_NOT_GATED 0x0 /* Not gated */
+#define GUTC1_GATED 0x1 /* Gated */
+#define GUTC1_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
+#define GUTC1_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
+#define GUTC1_UTC0_OUT 0x4 /* User Timer/Counter 0 out */
+
+/* User Timer/Counter 2 Gate Select (SetUtc2Gate) */
+#define GUTC2_NOT_GATED 0x0 /* Not gated */
+#define GUTC2_GATED 0x1 /* Gated */
+#define GUTC2_EXT_TC_GATE1 0x2 /* Ext. TC Gate 1 */
+#define GUTC2_EXT_TC_GATE2 0x3 /* Ext. TC Gate 2 */
+#define GUTC2_UTC1_OUT 0x4 /* User Timer/Counter 1 out */
+
+/* Interrupt Source Masks (SetITMask, ClearITMask, GetITStatus) */
+#define IRQM_ADC_FIFO_WRITE 0x0001 /* ADC FIFO Write */
+#define IRQM_CGT_RESET 0x0002 /* Reset CGT */
+#define IRQM_CGT_PAUSE 0x0008 /* Pause CGT */
+#define IRQM_ADC_ABOUT_CNT 0x0010 /* About Counter out */
+#define IRQM_ADC_DELAY_CNT 0x0020 /* Delay Counter out */
+#define IRQM_ADC_SAMPLE_CNT 0x0040 /* ADC Sample Counter */
+#define IRQM_DAC1_UCNT 0x0080 /* DAC1 Update Counter */
+#define IRQM_DAC2_UCNT 0x0100 /* DAC2 Update Counter */
+#define IRQM_UTC1 0x0200 /* User TC1 out */
+#define IRQM_UTC1_INV 0x0400 /* User TC1 out, inverted */
+#define IRQM_UTC2 0x0800 /* User TC2 out */
+#define IRQM_DIGITAL_IT 0x1000 /* Digital Interrupt */
+#define IRQM_EXTERNAL_IT 0x2000 /* External Interrupt */
+#define IRQM_ETRIG_RISING 0x4000 /* External Trigger rising-edge */
+#define IRQM_ETRIG_FALLING 0x8000 /* External Trigger falling-edge */
+
+/* DMA Request Sources (LAS0) */
+#define DMAS_DISABLED 0x0 /* DMA Disabled */
+#define DMAS_ADC_SCNT 0x1 /* ADC Sample Counter */
+#define DMAS_DAC1_UCNT 0x2 /* D/A1 Update Counter */
+#define DMAS_DAC2_UCNT 0x3 /* D/A2 Update Counter */
+#define DMAS_UTC1 0x4 /* User TC1 out */
+#define DMAS_ADFIFO_HALF_FULL 0x8 /* A/D FIFO half full */
+#define DMAS_DAC1_FIFO_HALF_EMPTY 0x9 /* D/A1 FIFO half empty */
+#define DMAS_DAC2_FIFO_HALF_EMPTY 0xA /* D/A2 FIFO half empty */
+
+/* DMA Local Addresses (0x40000000+LAS1 offset) */
+#define DMALADDR_ADC 0x40000000 /* A/D FIFO */
+#define DMALADDR_HDIN 0x40000004 /* High Speed Digital Input FIFO */
+#define DMALADDR_DAC1 0x40000008 /* D/A1 FIFO */
+#define DMALADDR_DAC2 0x4000000C /* D/A2 FIFO */
+
+/* Port 0 compare modes (SetDIO0CompareMode) */
+#define DIO_MODE_EVENT 0 /* Event Mode */
+#define DIO_MODE_MATCH 1 /* Match Mode */
+
+/* Digital Table Enable (Port 1 disable) */
+#define DTBL_DISABLE 0 /* Enable Digital Table */
+#define DTBL_ENABLE 1 /* Disable Digital Table */
+
+/* Sampling Signal for High Speed Digital Input (SetHdinStart) */
+#define HDIN_SOFTWARE 0x0 /* Software Trigger */
+#define HDIN_ADC 0x1 /* A/D Conversion Signal */
+#define HDIN_UTC0 0x2 /* User TC out 0 */
+#define HDIN_UTC1 0x3 /* User TC out 1 */
+#define HDIN_UTC2 0x4 /* User TC out 2 */
+#define HDIN_EPCLK 0x5 /* External Pacer Clock */
+#define HDIN_ETRG 0x6 /* External Trigger */
+
+/* Channel Gain Table / Channel Gain Latch */
+#define CSC_LATCH 0 /* Channel Gain Latch mode */
+#define CSC_CGT 1 /* Channel Gain Table mode */
+
+/* Channel Gain Table Pause Enable */
+#define CGT_PAUSE_DISABLE 0 /* Channel Gain Table Pause Disable */
+#define CGT_PAUSE_ENABLE 1 /* Channel Gain Table Pause Enable */
+
+/* DAC output type/range (p63) */
+#define AOUT_UNIP5 0 /* 0..+5 Volt */
+#define AOUT_UNIP10 1 /* 0..+10 Volt */
+#define AOUT_BIP5 2 /* -5..+5 Volt */
+#define AOUT_BIP10 3 /* -10..+10 Volt */
+
+/* Ghannel Gain Table field definitions (p61) */
+/* Gain */
#define GAIN1 0
#define GAIN2 1
#define GAIN4 2
#define GAIN64 6
#define GAIN128 7
-// Input range/polarity
-#define AIN_BIP5 0 // -5..+5 Volt
-#define AIN_BIP10 1 // -10..+10 Volt
-#define AIN_UNIP10 2 // 0..+10 Volt
+/* Input range/polarity */
+#define AIN_BIP5 0 /* -5..+5 Volt */
+#define AIN_BIP10 1 /* -10..+10 Volt */
+#define AIN_UNIP10 2 /* 0..+10 Volt */
-// non referenced single ended select bit
-#define NRSE_AGND 0 // AGND referenced SE input
-#define NRSE_AINS 1 // AIN SENSE referenced SE input
+/* non referenced single ended select bit */
+#define NRSE_AGND 0 /* AGND referenced SE input */
+#define NRSE_AINS 1 /* AIN SENSE referenced SE input */
-// single ended vs differential
-#define GND_SE 0 // Single-Ended
-#define GND_DIFF 1 // Differential
+/* single ended vs differential */
+#define GND_SE 0 /* Single-Ended */
+#define GND_DIFF 1 /* Differential */
projects / linux-2.6-omap-h63xx.git / blobdiff