--- /dev/null
+/*
+ comedi/drivers/amcc_s5933.h
+
+ Stuff for AMCC S5933 PCI Controller
+
+ Author: Michal Dobes <dobes@tesnet.cz>
+
+ Inspirated from general-purpose AMCC S5933 PCI Matchmaker driver
+ made by Andrea Cisternino <acister@pcape1.pi.infn.it>
+ and as result of espionage from MITE code made by David A. Schleef.
+ Thanks to AMCC for their on-line documentation and bus master DMA
+ example.
+*/
+
+#ifndef _AMCC_S5933_H_
+#define _AMCC_S5933_H_
+
+/****************************************************************************/
+/* AMCC Operation Register Offsets - PCI */
+/****************************************************************************/
+
+#define AMCC_OP_REG_OMB1 0x00
+#define AMCC_OP_REG_OMB2 0x04
+#define AMCC_OP_REG_OMB3 0x08
+#define AMCC_OP_REG_OMB4 0x0c
+#define AMCC_OP_REG_IMB1 0x10
+#define AMCC_OP_REG_IMB2 0x14
+#define AMCC_OP_REG_IMB3 0x18
+#define AMCC_OP_REG_IMB4 0x1c
+#define AMCC_OP_REG_FIFO 0x20
+#define AMCC_OP_REG_MWAR 0x24
+#define AMCC_OP_REG_MWTC 0x28
+#define AMCC_OP_REG_MRAR 0x2c
+#define AMCC_OP_REG_MRTC 0x30
+#define AMCC_OP_REG_MBEF 0x34
+#define AMCC_OP_REG_INTCSR 0x38
+#define AMCC_OP_REG_INTCSR_SRC (AMCC_OP_REG_INTCSR + 2) /* INT source */
+#define AMCC_OP_REG_INTCSR_FEC (AMCC_OP_REG_INTCSR + 3) /* FIFO ctrl */
+#define AMCC_OP_REG_MCSR 0x3c
+#define AMCC_OP_REG_MCSR_NVDATA (AMCC_OP_REG_MCSR + 2) /* Data in byte 2 */
+#define AMCC_OP_REG_MCSR_NVCMD (AMCC_OP_REG_MCSR + 3) /* Command in byte 3 */
+
+#define AMCC_FIFO_DEPTH_DWORD 8
+#define AMCC_FIFO_DEPTH_BYTES (8 * sizeof (u32))
+
+/****************************************************************************/
+/* AMCC - PCI Interrupt Control/Status Register */
+/****************************************************************************/
+#define INTCSR_OUTBOX_BYTE(x) ((x) & 0x3)
+#define INTCSR_OUTBOX_SELECT(x) (((x) & 0x3) << 2)
+#define INTCSR_OUTBOX_EMPTY_INT 0x10 // enable outbox empty interrupt
+#define INTCSR_INBOX_BYTE(x) (((x) & 0x3) << 8)
+#define INTCSR_INBOX_SELECT(x) (((x) & 0x3) << 10)
+#define INTCSR_INBOX_FULL_INT 0x1000 // enable inbox full interrupt
+#define INTCSR_INBOX_INTR_STATUS 0x20000 // read, or write clear inbox full interrupt
+#define INTCSR_INTR_ASSERTED 0x800000 // read only, interrupt asserted
+
+/****************************************************************************/
+/* AMCC - PCI non-volatile ram command register (byte 3 of master control/status register) */
+/****************************************************************************/
+#define MCSR_NV_LOAD_LOW_ADDR 0x0
+#define MCSR_NV_LOAD_HIGH_ADDR 0x20
+#define MCSR_NV_WRITE 0x40
+#define MCSR_NV_READ 0x60
+#define MCSR_NV_MASK 0x60
+#define MCSR_NV_ENABLE 0x80
+#define MCSR_NV_BUSY MCSR_NV_ENABLE
+
+/****************************************************************************/
+/* AMCC Operation Registers Size - PCI */
+/****************************************************************************/
+
+#define AMCC_OP_REG_SIZE 64 /* in bytes */
+
+/****************************************************************************/
+/* AMCC Operation Register Offsets - Add-on */
+/****************************************************************************/
+
+#define AMCC_OP_REG_AIMB1 0x00
+#define AMCC_OP_REG_AIMB2 0x04
+#define AMCC_OP_REG_AIMB3 0x08
+#define AMCC_OP_REG_AIMB4 0x0c
+#define AMCC_OP_REG_AOMB1 0x10
+#define AMCC_OP_REG_AOMB2 0x14
+#define AMCC_OP_REG_AOMB3 0x18
+#define AMCC_OP_REG_AOMB4 0x1c
+#define AMCC_OP_REG_AFIFO 0x20
+#define AMCC_OP_REG_AMWAR 0x24
+#define AMCC_OP_REG_APTA 0x28
+#define AMCC_OP_REG_APTD 0x2c
+#define AMCC_OP_REG_AMRAR 0x30
+#define AMCC_OP_REG_AMBEF 0x34
+#define AMCC_OP_REG_AINT 0x38
+#define AMCC_OP_REG_AGCSTS 0x3c
+#define AMCC_OP_REG_AMWTC 0x58
+#define AMCC_OP_REG_AMRTC 0x5c
+
+/****************************************************************************/
+/* AMCC - Add-on General Control/Status Register */
+/****************************************************************************/
+
+#define AGCSTS_CONTROL_MASK 0xfffff000
+#define AGCSTS_NV_ACC_MASK 0xe0000000
+#define AGCSTS_RESET_MASK 0x0e000000
+#define AGCSTS_NV_DA_MASK 0x00ff0000
+#define AGCSTS_BIST_MASK 0x0000f000
+#define AGCSTS_STATUS_MASK 0x000000ff
+#define AGCSTS_TCZERO_MASK 0x000000c0
+#define AGCSTS_FIFO_ST_MASK 0x0000003f
+
+#define AGCSTS_RESET_MBFLAGS 0x08000000
+#define AGCSTS_RESET_P2A_FIFO 0x04000000
+#define AGCSTS_RESET_A2P_FIFO 0x02000000
+#define AGCSTS_RESET_FIFOS (AGCSTS_RESET_A2P_FIFO | AGCSTS_RESET_P2A_FIFO)
+
+#define AGCSTS_A2P_TCOUNT 0x00000080
+#define AGCSTS_P2A_TCOUNT 0x00000040
+
+#define AGCSTS_FS_P2A_EMPTY 0x00000020
+#define AGCSTS_FS_P2A_HALF 0x00000010
+#define AGCSTS_FS_P2A_FULL 0x00000008
+
+#define AGCSTS_FS_A2P_EMPTY 0x00000004
+#define AGCSTS_FS_A2P_HALF 0x00000002
+#define AGCSTS_FS_A2P_FULL 0x00000001
+
+/****************************************************************************/
+/* AMCC - Add-on Interrupt Control/Status Register */
+/****************************************************************************/
+
+#define AINT_INT_MASK 0x00ff0000
+#define AINT_SEL_MASK 0x0000ffff
+#define AINT_IS_ENSEL_MASK 0x00001f1f
+
+#define AINT_INT_ASSERTED 0x00800000
+#define AINT_BM_ERROR 0x00200000
+#define AINT_BIST_INT 0x00100000
+
+#define AINT_RT_COMPLETE 0x00080000
+#define AINT_WT_COMPLETE 0x00040000
+
+#define AINT_OUT_MB_INT 0x00020000
+#define AINT_IN_MB_INT 0x00010000
+
+#define AINT_READ_COMPL 0x00008000
+#define AINT_WRITE_COMPL 0x00004000
+
+#define AINT_OMB_ENABLE 0x00001000
+#define AINT_OMB_SELECT 0x00000c00
+#define AINT_OMB_BYTE 0x00000300
+
+#define AINT_IMB_ENABLE 0x00000010
+#define AINT_IMB_SELECT 0x0000000c
+#define AINT_IMB_BYTE 0x00000003
+
+// these are bits from various different registers, needs cleanup XXX
+/* Enable Bus Mastering */
+#define EN_A2P_TRANSFERS 0x00000400
+/* FIFO Flag Reset */
+#define RESET_A2P_FLAGS 0x04000000L
+/* FIFO Relative Priority */
+#define A2P_HI_PRIORITY 0x00000100L
+/* Identify Interrupt Sources */
+#define ANY_S593X_INT 0x00800000L
+#define READ_TC_INT 0x00080000L
+#define WRITE_TC_INT 0x00040000L
+#define IN_MB_INT 0x00020000L
+#define MASTER_ABORT_INT 0x00100000L
+#define TARGET_ABORT_INT 0x00200000L
+#define BUS_MASTER_INT 0x00200000L
+
+#endif
projects / linux-2.6-omap-h63xx.git / blobdiff