--- /dev/null
+/*
+ * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
+ *
+ * ADDI-DATA GmbH
+ * Dieselstrasse 3
+ * D-77833 Ottersweier
+ * Tel: +19(0)7223/9493-0
+ * Fax: +49(0)7223/9493-92
+ * http://www.addi-data-com
+ * info@addi-data.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+// Card Specific information
+#define APCI3200_BOARD_VENDOR_ID 0x15B8
+//#define APCI3200_ADDRESS_RANGE 264
+
+int MODULE_NO;
+struct {
+ INT i_Gain;
+ INT i_Polarity;
+ INT i_OffsetRange;
+ INT i_Coupling;
+ INT i_SingleDiff;
+ INT i_AutoCalibration;
+ UINT ui_ReloadValue;
+ UINT ui_TimeUnitReloadVal;
+ INT i_Interrupt;
+ INT i_ModuleSelection;
+} Config_Parameters_Module1, Config_Parameters_Module2,
+ Config_Parameters_Module3, Config_Parameters_Module4;
+
+//ANALOG INPUT RANGE
+static const struct comedi_lrange range_apci3200_ai = { 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+static const struct comedi_lrange range_apci3300_ai = { 4, {
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+//Analog Input related Defines
+#define APCI3200_AI_OFFSET_GAIN 0
+#define APCI3200_AI_SC_TEST 4
+#define APCI3200_AI_IRQ 8
+#define APCI3200_AI_AUTOCAL 12
+#define APCI3200_RELOAD_CONV_TIME_VAL 32
+#define APCI3200_CONV_TIME_TIME_BASE 36
+#define APCI3200_RELOAD_DELAY_TIME_VAL 40
+#define APCI3200_DELAY_TIME_TIME_BASE 44
+#define APCI3200_AI_MODULE1 0
+#define APCI3200_AI_MODULE2 64
+#define APCI3200_AI_MODULE3 128
+#define APCI3200_AI_MODULE4 192
+#define TRUE 1
+#define FALSE 0
+#define APCI3200_AI_EOSIRQ 16
+#define APCI3200_AI_EOS 20
+#define APCI3200_AI_CHAN_ID 24
+#define APCI3200_AI_CHAN_VAL 28
+#define ANALOG_INPUT 0
+#define TEMPERATURE 1
+#define RESISTANCE 2
+
+#define ENABLE_EXT_TRIG 1
+#define ENABLE_EXT_GATE 2
+#define ENABLE_EXT_TRIG_GATE 3
+
+#define APCI3200_MAXVOLT 2.5
+#define ADDIDATA_GREATER_THAN_TEST 0
+#define ADDIDATA_LESS_THAN_TEST 1
+
+#define ADDIDATA_UNIPOLAR 1
+#define ADDIDATA_BIPOLAR 2
+
+//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+#define MAX_MODULE 4
+//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+
+typedef struct {
+ ULONG ul_NumberOfValue;
+ ULONG *pul_ResistanceValue;
+ ULONG *pul_TemperatureValue;
+} str_ADDIDATA_RTDStruct, *pstr_ADDIDATA_RTDStruct;
+
+//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+typedef struct {
+ // Begin JK 05/08/2003 change for Linux
+ unsigned long ul_CurrentSourceCJC;
+ unsigned long ul_CurrentSource[5];
+ // End JK 05/08/2003 change for Linux
+
+ // Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1
+ unsigned long ul_GainFactor[8]; // Gain Factor
+ unsigned int w_GainValue[10];
+ // End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1
+} str_Module;
+//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+
+//BEGIN JK 06.07.04: Management of sevrals boards
+typedef struct {
+ INT i_CJCAvailable;
+ INT i_CJCPolarity;
+ INT i_CJCGain;
+ INT i_InterruptFlag;
+ INT i_ADDIDATAPolarity;
+ INT i_ADDIDATAGain;
+ INT i_AutoCalibration;
+ INT i_ADDIDATAConversionTime;
+ INT i_ADDIDATAConversionTimeUnit;
+ INT i_ADDIDATAType;
+ INT i_ChannelNo;
+ INT i_ChannelCount;
+ INT i_ScanType;
+ INT i_FirstChannel;
+ INT i_LastChannel;
+ INT i_Sum;
+ INT i_Offset;
+ UINT ui_Channel_num;
+ INT i_Count;
+ INT i_Initialised;
+ //UINT ui_InterruptChannelValue[96]; //Buffer
+ UINT ui_InterruptChannelValue[144]; //Buffer
+ BYTE b_StructInitialized;
+ //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+ unsigned int ui_ScanValueArray[7 + 12]; // 7 is the maximal number of channels
+ //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
+
+ //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+ INT i_ConnectionType;
+ INT i_NbrOfModule;
+ str_Module s_Module[MAX_MODULE];
+ //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
+} str_BoardInfos;
+//END JK 06.07.04: Management of sevrals boards
+
+// Hardware Layer functions for Apci3200
+
+//AI
+
+INT i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data);
+INT i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data);
+INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data);
+INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data);
+INT i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s);
+INT i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
+INT i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_cmd *cmd);
+INT i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s);
+INT i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data);
+//Interrupt
+void v_APCI3200_Interrupt(int irq, void *d);
+int i_APCI3200_InterruptHandleEos(struct comedi_device *dev);
+//Reset functions
+INT i_APCI3200_Reset(struct comedi_device *dev);
+
+int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data);
+int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data);
+int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, UINT *data);
+int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, UINT *data);
+int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
+ struct comedi_subdevice *s, struct comedi_insn *insn,
+ unsigned int *data);
+int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data);
projects / linux-2.6-omap-h63xx.git / blobdiff