/*
- * File: drivers/spi/bfin5xx_spi.c
- * Maintainer:
- * Bryan Wu <bryan.wu@analog.com>
- * Original Author:
- * Luke Yang (Analog Devices Inc.)
- *
- * Created: March. 10th 2006
- * Description: SPI controller driver for Blackfin BF5xx
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * Modified:
- * March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
- * August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
- * July 17, 2007 add support for BF54x SPI0 controller (Bryan Wu)
- * July 30, 2007 add platfrom_resource interface to support multi-port
- * SPI controller (Bryan Wu)
+ * Blackfin On-Chip SPI Driver
*
* Copyright 2004-2007 Analog Devices Inc.
*
- * This program is free software ; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * You should have received a copy of the GNU General Public License
- * along with this program ; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
#define MAX_SPI_SSEL 7
/* stop controller and re-config current chip*/
-static int restore_state(struct driver_data *drv_data)
+static void restore_state(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- int ret = 0;
/* Clear status and disable clock */
write_STAT(drv_data, BIT_STAT_CLR);
bfin_spi_enable(drv_data);
cs_active(drv_data, chip);
-
- if (ret)
- dev_dbg(&drv_data->pdev->dev,
- ": request chip select number %d failed\n",
- chip->chip_select_num);
-
- return ret;
}
/* used to kick off transfer in rx mode */
dev_dbg(&drv_data->pdev->dev,
"cr8-s is 0x%x\n", read_STAT(drv_data));
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
while (read_STAT(drv_data) & BIT_STAT_TXS)
cpu_relax();
++drv_data->tx;
}
+
+ /* poll for SPI completion before return */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
}
static void u8_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
while (read_STAT(drv_data) & BIT_STAT_TXS)
cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
cs_deactive(drv_data, chip);
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
- /* clear TDBR buffer before read(else it will be shifted out) */
- write_TDBR(drv_data, 0xFFFF);
+ while (drv_data->rx < drv_data->rx_end) {
+ cs_active(drv_data, chip);
+ read_RDBR(drv_data); /* kick off */
- cs_active(drv_data, chip);
- dummy_read(drv_data);
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
- while (drv_data->rx < drv_data->rx_end - 1) {
+ *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
cs_deactive(drv_data, chip);
- while (!(read_STAT(drv_data) & BIT_STAT_RXS))
- cpu_relax();
- cs_active(drv_data, chip);
- *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
++drv_data->rx;
}
- cs_deactive(drv_data, chip);
-
- while (!(read_STAT(drv_data) & BIT_STAT_RXS))
- cpu_relax();
- *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
- ++drv_data->rx;
}
static void u8_duplex(struct driver_data *drv_data)
{
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->rx < drv_data->rx_end) {
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->rx < drv_data->rx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
dev_dbg(&drv_data->pdev->dev,
"cr16 is 0x%x\n", read_STAT(drv_data));
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
while ((read_STAT(drv_data) & BIT_STAT_TXS))
cpu_relax();
drv_data->tx += 2;
}
+
+ /* poll for SPI completion before return */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
}
static void u16_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
while ((read_STAT(drv_data) & BIT_STAT_TXS))
cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
cs_deactive(drv_data, chip);
static void u16_duplex(struct driver_data *drv_data)
{
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
- struct driver_data *drv_data = (struct driver_data *)dev_id;
+ struct driver_data *drv_data = dev_id;
struct chip_data *chip = drv_data->cur_chip;
struct spi_message *msg = drv_data->cur_msg;
} else {
drv_data->len = transfer->len;
}
- dev_dbg(&drv_data->pdev->dev, "transfer: ",
- "drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
drv_data->write, chip->write, null_writer);
/* speed and width has been set on per message */
/* Setup the SSP using the per chip configuration */
drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- if (restore_state(drv_data)) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- };
+ restore_state(drv_data);
list_del_init(&drv_data->cur_msg->queue);
if ((chip->chip_select_num > 0)
&& (chip->chip_select_num <= spi->master->num_chipselect))
peripheral_request(ssel[spi->master->bus_num]
- [chip->chip_select_num-1], DRV_NAME);
+ [chip->chip_select_num-1], spi->modalias);
cs_deactive(drv_data, chip);
goto out_error_queue_alloc;
}
+ status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+ if (status != 0) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error_queue_alloc;
+ }
+
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
goto out_error_queue_alloc;
}
- status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
- if (status != 0) {
- dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
- goto out_error;
- }
-
dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
DRV_DESC, DRV_VERSION, drv_data->regs_base,
drv_data->dma_channel);
iounmap((void *) drv_data->regs_base);
out_error_ioremap:
out_error_get_res:
-out_error:
spi_master_put(master);
return status;
#define bfin5xx_spi_resume NULL
#endif /* CONFIG_PM */
-MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:bfin-spi");
static struct platform_driver bfin5xx_spi_driver = {
.driver = {
.name = DRV_NAME,