SPI: Add an SPI master driver for the OMAP2 McSPI controller

[linux-2.6-omap-h63xx.git] / drivers / spi / Makefile

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8f4cb67997b32afcc5207b49fb7ae2dfcb2654eb..4e52f9379db98e9158e6a91ecf309a82ddee597e 100644 (file)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,15 +11,24 @@ endif
 obj-$(CONFIG_SPI_MASTER)               += spi.o
 
 # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_ATMEL)                        += atmel_spi.o
+obj-$(CONFIG_SPI_BFIN)                 += spi_bfin5xx.o
 obj-$(CONFIG_SPI_BITBANG)              += spi_bitbang.o
+obj-$(CONFIG_SPI_AU1550)               += au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)            += spi_butterfly.o
+obj-$(CONFIG_SPI_IMX)                  += spi_imx.o
 obj-$(CONFIG_SPI_PXA2XX)               += pxa2xx_spi.o
+obj-$(CONFIG_SPI_OMAP_UWIRE)           += omap_uwire.o
+obj-$(CONFIG_SPI_OMAP24XX)             += omap2_mcspi.o
+obj-$(CONFIG_SPI_MPC52xx_PSC)          += mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC83xx)              += spi_mpc83xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)         += spi_s3c24xx_gpio.o
 obj-$(CONFIG_SPI_S3C24XX)              += spi_s3c24xx.o
 #      ... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
+obj-$(CONFIG_SPI_AT25)         += at25.o
+obj-$(CONFIG_SPI_SPIDEV)       += spidev.o
 #      ... add above this line ...
 
 # SPI slave controller drivers (upstream link)