#include <asm/io.h>
#include <asm/irq.h>
#include <asm/fs_pd.h>
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
#include <asm/prom.h>
-#endif
#include <linux/serial_core.h>
#include <linux/kernel.h>
/**************************************************************/
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
cpm_command(port->command, cmd);
iounmap(pram);
}
-#else
-void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
-{
- ulong val;
- int line = port - cpm_uart_ports;
- volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
-
-
- switch (line) {
- case UART_SMC1:
- val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- case UART_SMC2:
- val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- case UART_SCC1:
- val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- case UART_SCC2:
- val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- case UART_SCC3:
- val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- case UART_SCC4:
- val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
- cmd) | CPM_CR_FLG;
- break;
- default:
- return;
-
- }
- cp->cp_cpcr = val;
- while (cp->cp_cpcr & CPM_CR_FLG) ;
-
- cpm2_unmap(cp);
-}
-
-void smc1_lineif(struct uart_cpm_port *pinfo)
-{
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
- /* SMC1 is only on port D */
- io->iop_ppard |= 0x00c00000;
- io->iop_pdird |= 0x00400000;
- io->iop_pdird &= ~0x00800000;
- io->iop_psord &= ~0x00c00000;
-
- /* Wire BRG1 to SMC1 */
- cpmux->cmx_smr &= 0x0f;
- pinfo->brg = 1;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-
-void smc2_lineif(struct uart_cpm_port *pinfo)
-{
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
- /* SMC2 is only on port A */
- io->iop_ppara |= 0x00c00000;
- io->iop_pdira |= 0x00400000;
- io->iop_pdira &= ~0x00800000;
- io->iop_psora &= ~0x00c00000;
-
- /* Wire BRG2 to SMC2 */
- cpmux->cmx_smr &= 0xf0;
- pinfo->brg = 2;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-
-void scc1_lineif(struct uart_cpm_port *pinfo)
-{
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
- /* Use Port D for SCC1 instead of other functions. */
- io->iop_ppard |= 0x00000003;
- io->iop_psord &= ~0x00000001; /* Rx */
- io->iop_psord |= 0x00000002; /* Tx */
- io->iop_pdird &= ~0x00000001; /* Rx */
- io->iop_pdird |= 0x00000002; /* Tx */
-
- /* Wire BRG1 to SCC1 */
- cpmux->cmx_scr &= 0x00ffffff;
- cpmux->cmx_scr |= 0x00000000;
- pinfo->brg = 1;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-
-void scc2_lineif(struct uart_cpm_port *pinfo)
-{
- /*
- * STx GP3 uses the SCC2 secondary option pin assignment
- * which this driver doesn't account for in the static
- * pin assignments. This kind of board specific info
- * really has to get out of the driver so boards can
- * be supported in a sane fashion.
- */
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-#ifndef CONFIG_STX_GP3
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-
- io->iop_pparb |= 0x008b0000;
- io->iop_pdirb |= 0x00880000;
- io->iop_psorb |= 0x00880000;
- io->iop_pdirb &= ~0x00030000;
- io->iop_psorb &= ~0x00030000;
-#endif
- cpmux->cmx_scr &= 0xff00ffff;
- cpmux->cmx_scr |= 0x00090000;
- pinfo->brg = 2;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-
-void scc3_lineif(struct uart_cpm_port *pinfo)
-{
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
- io->iop_pparb |= 0x008b0000;
- io->iop_pdirb |= 0x00880000;
- io->iop_psorb |= 0x00880000;
- io->iop_pdirb &= ~0x00030000;
- io->iop_psorb &= ~0x00030000;
- cpmux->cmx_scr &= 0xffff00ff;
- cpmux->cmx_scr |= 0x00001200;
- pinfo->brg = 3;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-
-void scc4_lineif(struct uart_cpm_port *pinfo)
-{
- volatile iop_cpm2_t *io = cpm2_map(im_ioport);
- volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
- io->iop_ppard |= 0x00000600;
- io->iop_psord &= ~0x00000600; /* Tx/Rx */
- io->iop_pdird &= ~0x00000200; /* Rx */
- io->iop_pdird |= 0x00000400; /* Tx */
-
- cpmux->cmx_scr &= 0xffffff00;
- cpmux->cmx_scr |= 0x0000001b;
- pinfo->brg = 4;
-
- cpm2_unmap(cpmux);
- cpm2_unmap(io);
-}
-#endif
-
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
cpm_dpfree(pinfo->dp_addr);
}
-
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
- u16 *addr;
-#endif
- pr_debug("CPM uart[-]:init portdesc\n");
-
- cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
- cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
- cpm_uart_ports[UART_SMC1].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
-
- cpm_uart_ports[UART_SMC1].smcup =
- (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
- addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
- *addr = PROFF_SMC1;
- cpm2_unmap(addr);
-
- cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
- cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
- cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
- cpm_uart_ports[UART_SMC2].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
-
- cpm_uart_ports[UART_SMC2].smcup =
- (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
- addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
- *addr = PROFF_SMC2;
- cpm2_unmap(addr);
-
- cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
- cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
- cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
- cpm_uart_ports[UART_SCC1].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
- cpm_uart_ports[UART_SCC1].sccup =
- (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
-
- cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
- ~(UART_SCCM_TX | UART_SCCM_RX);
- cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
- cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
- cpm_uart_ports[UART_SCC2].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
- cpm_uart_ports[UART_SCC2].sccup =
- (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
-
- cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
- ~(UART_SCCM_TX | UART_SCCM_RX);
- cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
- cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
- cpm_uart_ports[UART_SCC3].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
- cpm_uart_ports[UART_SCC3].sccup =
- (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
-
- cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
- ~(UART_SCCM_TX | UART_SCCM_RX);
- cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
- cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
- cpm_uart_ports[UART_SCC4].port.mapbase =
- (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
- cpm_uart_ports[UART_SCC4].sccup =
- (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
-
- cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
- ~(UART_SCCM_TX | UART_SCCM_RX);
- cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
- cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-
- return 0;
-}
-#endif
projects / linux-2.6-omap-h63xx.git / blobdiff