Adjust path to gpio headers

[linux-2.6-omap-h63xx.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d89972beb12c05b5e8e3beb106a628e91176c01b..0328fd4006e52436e0fa49fd3e2a2909572b0c10 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -707,7 +707,7 @@ choice
 
 config SERIAL_BFIN_DMA
        bool "DMA mode"
-       depends on !DMA_UNCACHED_NONE && !KGDB_UART
+       depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
        help
          This driver works under DMA mode. If this option is selected, the
          blackfin simple dma driver is also enabled.
@@ -734,19 +734,19 @@ config BFIN_UART0_CTSRTS
 
 config UART0_CTS_PIN
        int "UART0 CTS pin"
-       depends on BFIN_UART0_CTSRTS
+       depends on BFIN_UART0_CTSRTS && !BF548
        default 23
        help
          The default pin is GPIO_GP7.
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART0_RTS_PIN
        int "UART0 RTS pin"
-       depends on BFIN_UART0_CTSRTS
+       depends on BFIN_UART0_CTSRTS && !BF548
        default 22
        help
          The default pin is GPIO_GP6.
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART1
        bool "Enable UART1"
@@ -763,17 +763,17 @@ config BFIN_UART1_CTSRTS
 
 config UART1_CTS_PIN
        int "UART1 CTS pin"
-       depends on BFIN_UART1_CTSRTS && !BF54x
+       depends on BFIN_UART1_CTSRTS && !BF548
        default -1
        help
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
        int "UART1 RTS pin"
-       depends on BFIN_UART1_CTSRTS && !BF54x
+       depends on BFIN_UART1_CTSRTS && !BF548
        default -1
        help
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART2
        bool "Enable UART2"
@@ -790,17 +790,17 @@ config BFIN_UART2_CTSRTS
 
 config UART2_CTS_PIN
        int "UART2 CTS pin"
-       depends on BFIN_UART2_CTSRTS
+       depends on BFIN_UART2_CTSRTS && !BF548
        default -1
        help
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART2_RTS_PIN
        int "UART2 RTS pin"
-       depends on BFIN_UART2_CTSRTS
+       depends on BFIN_UART2_CTSRTS && !BF548
        default -1
        help
-         Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART3
        bool "Enable UART3"
@@ -815,6 +815,20 @@ config BFIN_UART3_CTSRTS
          Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
          signal.
 
+config UART3_CTS_PIN
+       int "UART3 CTS pin"
+       depends on BFIN_UART3_CTSRTS && !BF548
+       default -1
+       help
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+
+config UART3_RTS_PIN
+       int "UART3 RTS pin"
+       depends on BFIN_UART3_CTSRTS && !BF548
+       default -1
+       help
+         Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+
 config SERIAL_IMX
        bool "IMX serial port support"
        depends on ARM && (ARCH_IMX || ARCH_MXC)