Merge current mainline tree into linux-omap tree

[linux-2.6-omap-h63xx.git] / drivers / serial / 8250.c

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6a249192e9a322a5c006595b6ee250e783..9b913db147a591fcadab8ba6a7e7be85e8c8ef1c 100644 (file)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/serial.h>
 
 #include "8250.h"
 
@@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
  */
 #define CONFIG_HUB6 1
 
+#include <asm/serial.h>
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no
  * standard enumeration mechanism.   Platforms that can find all
@@ -1504,7 +1504,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 
        DEBUG_INTR("end.\n");
 
+#ifdef CONFIG_ARCH_OMAP15XX
+       return IRQ_HANDLED;     /* FIXME: iir status not ready on 1510 */
+#else
        return IRQ_RETVAL(handled);
+#endif
 }
 
 /*
@@ -1547,8 +1551,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
                i->head = &up->list;
                spin_unlock_irq(&i->lock);
 
-               irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
                ret = request_irq(up->port.irq, serial8250_interrupt,
                                  irq_flags, "serial", i);
                if (ret < 0)
@@ -2226,6 +2228,19 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
                        /* emulated UARTs (Lucent Venus 167x) need two steps */
                        serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
                }
+
+               /* Note that we need to set ECB to access write water mark
+                * bits. First allow FCR tx fifo write, then set fcr with
+                * possible TX fifo settings. */
+               if (uart_config[up->port.type].flags & UART_CAP_EFR) {
+                       serial_outp(up, UART_LCR, 0xbf);        /* Access EFR */
+                       serial_outp(up, UART_EFR, UART_EFR_ECB);
+                       serial_outp(up, UART_LCR, 0x0);         /* Access FCR */
+                       serial_outp(up, UART_FCR, fcr);
+                       serial_outp(up, UART_LCR, 0xbf);        /* Access EFR */
+                       serial_outp(up, UART_EFR, 0);
+                       serial_outp(up, UART_LCR, cval);        /* Access FCR */
+        } else
                serial_outp(up, UART_FCR, fcr);         /* set fcr */
        }
        serial8250_set_mctrl(&up->port, up->port.mctrl);
@@ -2255,6 +2270,11 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
        unsigned int size = 8 << up->port.regshift;
        int ret = 0;
 
+#ifdef CONFIG_ARCH_OMAP
+       if (is_omap_port((unsigned int)up->port.membase))
+               size = 0x16 << up->port.regshift;
+#endif
+
        switch (up->port.iotype) {
        case UPIO_AU:
                size = 0x100000;
@@ -2625,6 +2645,9 @@ static struct console serial8250_console = {
 
 static int __init serial8250_console_init(void)
 {
+       if (nr_uarts > UART_NR)
+               nr_uarts = UART_NR;
+
        serial8250_isa_init_ports();
        register_console(&serial8250_console);
        return 0;