Merge current mainline tree into linux-omap tree

[linux-2.6-omap-h63xx.git] / drivers / serial / 8250.c

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 39db36f323cc72386b4e34cf6f6613f2ec42ef70..1c4000c7e48e5932c1aef0976b8eac5bdc555314 100644 (file)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1872,6 +1872,7 @@ static int serial8250_startup(struct uart_port *port)
        }
 
        if (is_real_interrupt(up->port.irq)) {
+               unsigned char iir1;
                /*
                 * Test for UARTs that do not reassert THRE when the
                 * transmitter is idle and the interrupt has already
@@ -1885,7 +1886,7 @@ static int serial8250_startup(struct uart_port *port)
                wait_for_xmitr(up, UART_LSR_THRE);
                serial_out_sync(up, UART_IER, UART_IER_THRI);
                udelay(1); /* allow THRE to set */
-               serial_in(up, UART_IIR);
+               iir1 = serial_in(up, UART_IIR);
                serial_out(up, UART_IER, 0);
                serial_out_sync(up, UART_IER, UART_IER_THRI);
                udelay(1); /* allow a working UART time to re-assert THRE */
@@ -1898,7 +1899,7 @@ static int serial8250_startup(struct uart_port *port)
                 * If the interrupt is not reasserted, setup a timer to
                 * kick the UART on a regular basis.
                 */
-               if (iir & UART_IIR_NO_INT) {
+               if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
                        pr_debug("ttyS%d - using backup timer\n", port->line);
                        up->timer.function = serial8250_backup_timeout;
                        up->timer.data = (unsigned long)up;
@@ -2245,7 +2246,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
        }
        serial8250_set_mctrl(&up->port, up->port.mctrl);
        spin_unlock_irqrestore(&up->port.lock, flags);
-       tty_termios_encode_baud_rate(termios, baud, baud);
+       /* Don't rewrite B0 */
+       if (tty_termios_baud_rate(termios))
+               tty_termios_encode_baud_rate(termios, baud, baud);
 }
 
 static void
@@ -2290,7 +2293,8 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
                }
 
                if (up->port.flags & UPF_IOREMAP) {
-                       up->port.membase = ioremap(up->port.mapbase, size);
+                       up->port.membase = ioremap_nocache(up->port.mapbase,
+                                                                       size);
                        if (!up->port.membase) {
                                release_mem_region(up->port.mapbase, size);
                                ret = -ENOMEM;