#include <linux/blkpg.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/string_helpers.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
+#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
+#define SD_MINORS 16
+#else
+#define SD_MINORS 0
+#endif
+
static int sd_revalidate_disk(struct gendisk *);
static int sd_probe(struct device *);
static int sd_remove(struct device *);
sd_print_sense_hdr(sdkp, &sshdr);
return -EINVAL;
}
- sd_revalidate_disk(sdkp->disk);
+ revalidate_disk(sdkp->disk);
return count;
}
sector_t block = rq->sector;
sector_t threshold;
unsigned int this_count = rq->nr_sectors;
- unsigned int timeout = sdp->timeout;
- int ret;
+ int ret, host_dif;
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
rq->nr_sectors));
/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
- if (scsi_host_dif_capable(sdp->host, sdkp->protection_type))
+ host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
+ if (host_dif)
SCpnt->cmnd[1] = 1 << 5;
else
SCpnt->cmnd[1] = 0;
SCpnt->sdb.length = this_count * sdp->sector_size;
/* If DIF or DIX is enabled, tell HBA how to handle request */
- if (sdkp->protection_type || scsi_prot_sg_count(SCpnt))
- sd_dif_op(SCpnt, sdkp->protection_type, scsi_prot_sg_count(SCpnt));
+ if (host_dif || scsi_prot_sg_count(SCpnt))
+ sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt),
+ sdkp->protection_type);
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
SCpnt->transfersize = sdp->sector_size;
SCpnt->underflow = this_count << 9;
SCpnt->allowed = SD_MAX_RETRIES;
- SCpnt->timeout_per_command = timeout;
/*
* This indicates that the command is ready from our end to be
struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
if (sdkp) {
- sd_revalidate_disk(sdkp->disk);
+ revalidate_disk(sdkp->disk);
scsi_disk_put(sdkp);
}
}
good_bytes = sd_completed_bytes(SCpnt);
break;
case RECOVERED_ERROR:
- case NO_SENSE:
/* Inform the user, but make sure that it's not treated
* as a hard error.
*/
memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
good_bytes = scsi_bufflen(SCpnt);
break;
+ case NO_SENSE:
+ /* This indicates a false check condition, so ignore it. An
+ * unknown amount of data was transferred so treat it as an
+ * error.
+ */
+ scsi_print_sense("sd", SCpnt);
+ SCpnt->result = 0;
+ memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ break;
case ABORTED_COMMAND:
if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */
scsi_print_result(SCpnt);
scsi_print_sense("sd", SCpnt);
good_bytes = sd_completed_bytes(SCpnt);
}
- if (!scsi_device_protection(SCpnt->device) &&
- SCpnt->device->use_10_for_rw &&
- (SCpnt->cmnd[0] == READ_10 ||
- SCpnt->cmnd[0] == WRITE_10))
- SCpnt->device->use_10_for_rw = 0;
- if (SCpnt->device->use_10_for_ms &&
- (SCpnt->cmnd[0] == MODE_SENSE_10 ||
- SCpnt->cmnd[0] == MODE_SELECT_10))
- SCpnt->device->use_10_for_ms = 0;
break;
default:
break;
else
type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+ sdkp->protection_type = type;
+
switch (type) {
case SD_DIF_TYPE0_PROTECTION:
- sdkp->protection_type = 0;
- break;
-
case SD_DIF_TYPE1_PROTECTION:
case SD_DIF_TYPE3_PROTECTION:
- sdkp->protection_type = type;
break;
case SD_DIF_TYPE2_PROTECTION:
return;
disable:
- sdkp->protection_type = 0;
sdkp->capacity = 0;
}
*/
sector_size = 512;
}
+ blk_queue_hardsect_size(sdp->request_queue, sector_size);
+
{
- /*
- * The msdos fs needs to know the hardware sector size
- * So I have created this table. See ll_rw_blk.c
- * Jacques Gelinas (Jacques@solucorp.qc.ca)
- */
- int hard_sector = sector_size;
- sector_t sz = (sdkp->capacity/2) * (hard_sector/256);
- struct request_queue *queue = sdp->request_queue;
- sector_t mb = sz;
+ char cap_str_2[10], cap_str_10[10];
+ u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
- blk_queue_hardsect_size(queue, hard_sector);
- /* avoid 64-bit division on 32-bit platforms */
- sector_div(sz, 625);
- mb -= sz - 974;
- sector_div(mb, 1950);
+ string_get_size(sz, STRING_UNITS_2, cap_str_2,
+ sizeof(cap_str_2));
+ string_get_size(sz, STRING_UNITS_10, cap_str_10,
+ sizeof(cap_str_10));
sd_printk(KERN_NOTICE, sdkp,
- "%llu %d-byte hardware sectors (%llu MB)\n",
+ "%llu %d-byte hardware sectors: (%s/%s)\n",
(unsigned long long)sdkp->capacity,
- hard_sector, (unsigned long long)mb);
+ sector_size, cap_str_10, cap_str_2);
}
/* Rescale capacity to 512-byte units */
return 0;
}
+/**
+ * sd_format_disk_name - format disk name
+ * @prefix: name prefix - ie. "sd" for SCSI disks
+ * @index: index of the disk to format name for
+ * @buf: output buffer
+ * @buflen: length of the output buffer
+ *
+ * SCSI disk names starts at sda. The 26th device is sdz and the
+ * 27th is sdaa. The last one for two lettered suffix is sdzz
+ * which is followed by sdaaa.
+ *
+ * This is basically 26 base counting with one extra 'nil' entry
+ * at the beggining from the second digit on and can be
+ * determined using similar method as 26 base conversion with the
+ * index shifted -1 after each digit is computed.
+ *
+ * CONTEXT:
+ * Don't care.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
+{
+ const int base = 'z' - 'a' + 1;
+ char *begin = buf + strlen(prefix);
+ char *end = buf + buflen;
+ char *p;
+ int unit;
+
+ p = end - 1;
+ *p = '\0';
+ unit = base;
+ do {
+ if (p == begin)
+ return -EINVAL;
+ *--p = 'a' + (index % unit);
+ index = (index / unit) - 1;
+ } while (index >= 0);
+
+ memmove(begin, p, end - p);
+ memcpy(buf, prefix, strlen(prefix));
+
+ return 0;
+}
+
/**
* sd_probe - called during driver initialization and whenever a
* new scsi device is attached to the system. It is called once
if (!sdkp)
goto out;
- gd = alloc_disk(16);
+ gd = alloc_disk(SD_MINORS);
if (!gd)
goto out_free;
if (error)
goto out_put;
- error = -EBUSY;
- if (index >= SD_MAX_DISKS)
+ error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
+ if (error)
goto out_free_index;
sdkp->device = sdp;
sdkp->openers = 0;
sdkp->previous_state = 1;
- if (!sdp->timeout) {
+ if (!sdp->request_queue->rq_timeout) {
if (sdp->type != TYPE_MOD)
- sdp->timeout = SD_TIMEOUT;
+ blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
else
- sdp->timeout = SD_MOD_TIMEOUT;
+ blk_queue_rq_timeout(sdp->request_queue,
+ SD_MOD_TIMEOUT);
}
device_initialize(&sdkp->dev);
get_device(&sdp->sdev_gendev);
- gd->major = sd_major((index & 0xf0) >> 4);
- gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
- gd->minors = 16;
- gd->fops = &sd_fops;
-
- if (index < 26) {
- sprintf(gd->disk_name, "sd%c", 'a' + index % 26);
- } else if (index < (26 + 1) * 26) {
- sprintf(gd->disk_name, "sd%c%c",
- 'a' + index / 26 - 1,'a' + index % 26);
- } else {
- const unsigned int m1 = (index / 26 - 1) / 26 - 1;
- const unsigned int m2 = (index / 26 - 1) % 26;
- const unsigned int m3 = index % 26;
- sprintf(gd->disk_name, "sd%c%c%c",
- 'a' + m1, 'a' + m2, 'a' + m3);
+ if (index < SD_MAX_DISKS) {
+ gd->major = sd_major((index & 0xf0) >> 4);
+ gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
+ gd->minors = SD_MINORS;
}
-
+ gd->fops = &sd_fops;
gd->private_data = &sdkp->driver;
gd->queue = sdkp->device->request_queue;
blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
gd->driverfs_dev = &sdp->sdev_gendev;
- gd->flags = GENHD_FL_DRIVERFS;
+ gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS;
if (sdp->removable)
gd->flags |= GENHD_FL_REMOVABLE;
dev_set_drvdata(dev, sdkp);
add_disk(gd);
- blk_register_filter(gd);
sd_dif_config_host(sdkp);
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
struct scsi_disk *sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
- blk_unregister_filter(sdkp->disk);
del_gendisk(sdkp->disk);
sd_shutdown(dev);