static unsigned int max_scsi_luns = 1;
#endif
-module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR);
+module_param_named(max_luns, max_scsi_luns, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(max_luns,
"last scsi LUN (should be between 1 and 2^32-1)");
*/
static unsigned int max_scsi_report_luns = 511;
-module_param_named(max_report_luns, max_scsi_report_luns, int, S_IRUGO|S_IWUSR);
+module_param_named(max_report_luns, max_scsi_report_luns, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(max_report_luns,
"REPORT LUNS maximum number of LUNS received (should be"
" between 1 and 16384)");
static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
-module_param_named(inq_timeout, scsi_inq_timeout, int, S_IRUGO|S_IWUSR);
+module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(inq_timeout,
"Timeout (in seconds) waiting for devices to answer INQUIRY."
" Default is 5. Some non-compliant devices need more.");
+/* This lock protects only this list */
static DEFINE_SPINLOCK(async_scan_lock);
static LIST_HEAD(scanning_hosts);
/* Only exported for the benefit of scsi_wait_scan */
EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
+#ifndef MODULE
+/*
+ * For async scanning we need to wait for all the scans to complete before
+ * trying to mount the root fs. Otherwise non-modular drivers may not be ready
+ * yet.
+ */
+late_initcall(scsi_complete_async_scans);
+#endif
+
/**
* scsi_unlock_floptical - unlock device via a special MODE SENSE command
* @sdev: scsi device to send command to
/**
* scsi_alloc_sdev - allocate and setup a scsi_Device
+ * @starget: which target to allocate a &scsi_device for
+ * @lun: which lun
+ * @hostdata: usually NULL and set by ->slave_alloc instead
*
* Description:
* Allocate, initialize for io, and return a pointer to a scsi_Device.
struct scsi_device *sdev;
int display_failure_msg = 1, ret;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ extern void scsi_evt_thread(struct work_struct *work);
sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
GFP_ATOMIC);
INIT_LIST_HEAD(&sdev->same_target_siblings);
INIT_LIST_HEAD(&sdev->cmd_list);
INIT_LIST_HEAD(&sdev->starved_entry);
+ INIT_LIST_HEAD(&sdev->event_list);
spin_lock_init(&sdev->list_lock);
+ INIT_WORK(&sdev->event_work, scsi_evt_thread);
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->sdev_target = starget;
/**
* scsi_target_reap - check to see if target is in use and destroy if not
- *
* @starget: target to be checked
*
* This is used after removing a LUN or doing a last put of the target
/**
* scsi_add_lun - allocate and fully initialze a scsi_device
- * @sdevscan: holds information to be stored in the new scsi_device
- * @sdevnew: store the address of the newly allocated scsi_device
+ * @sdev: holds information to be stored in the new scsi_device
* @inq_result: holds the result of a previous INQUIRY to the LUN
* @bflags: black/white list flag
+ * @async: 1 if this device is being scanned asynchronously
*
* Description:
- * Allocate and initialize a scsi_device matching sdevscan. Optionally
- * set fields based on values in *@bflags. If @sdevnew is not
- * NULL, store the address of the new scsi_device in *@sdevnew (needed
- * when scanning a particular LUN).
+ * Initialize the scsi_device @sdev. Optionally set fields based
+ * on values in *@bflags.
*
* Return:
* SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
sdev->rev = (char *) (sdev->inquiry + 32);
if (*bflags & BLIST_ISROM) {
- /*
- * It would be better to modify sdev->type, and set
- * sdev->removable; this can now be done since
- * print_inquiry has gone away.
- */
- inq_result[0] = TYPE_ROM;
- inq_result[1] |= 0x80; /* removable */
- } else if (*bflags & BLIST_NO_ULD_ATTACH)
- sdev->no_uld_attach = 1;
+ sdev->type = TYPE_ROM;
+ sdev->removable = 1;
+ } else {
+ sdev->type = (inq_result[0] & 0x1f);
+ sdev->removable = (inq_result[1] & 0x80) >> 7;
+ }
- switch (sdev->type = (inq_result[0] & 0x1f)) {
+ switch (sdev->type) {
case TYPE_RBC:
- /* RBC devices can return SCSI-3 compliance and yet
- * still not support REPORT LUNS, so make them act as
- * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
- * specifically set */
- if ((*bflags & BLIST_REPORTLUN2) == 0)
- *bflags |= BLIST_NOREPORTLUN;
- /* fall through */
case TYPE_TAPE:
case TYPE_DISK:
case TYPE_PRINTER:
sdev->writeable = 1;
break;
case TYPE_ROM:
- /* MMC devices can return SCSI-3 compliance and yet
- * still not support REPORT LUNS, so make them act as
- * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
- * specifically set */
- if ((*bflags & BLIST_REPORTLUN2) == 0)
- *bflags |= BLIST_NOREPORTLUN;
- /* fall through */
case TYPE_WORM:
sdev->writeable = 0;
break;
printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
}
+ if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
+ /* RBC and MMC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ }
+
/*
* For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
* spec says: The device server is capable of supporting the
*/
sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
- sdev->removable = (0x80 & inq_result[1]) >> 7;
sdev->lockable = sdev->removable;
sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
- if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 &&
- inq_result[56] & 0x04))
+ if (sdev->scsi_level >= SCSI_3 ||
+ (sdev->inquiry_len > 56 && inq_result[56] & 0x04))
sdev->ppr = 1;
if (inq_result[7] & 0x60)
sdev->wdtr = 1;
sdev->inq_periph_qual, inq_result[2] & 0x07,
(inq_result[3] & 0x0f) == 1 ? " CCS" : "");
- /*
- * End sysfs code.
- */
-
if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
!(*bflags & BLIST_NOTQ))
sdev->tagged_supported = 1;
+
/*
* Some devices (Texel CD ROM drives) have handshaking problems
* when used with the Seagate controllers. borken is initialized
if ((*bflags & BLIST_BORKEN) == 0)
sdev->borken = 0;
+ if (*bflags & BLIST_NO_ULD_ATTACH)
+ sdev->no_uld_attach = 1;
+
/*
* Apparently some really broken devices (contrary to the SCSI
* standards) need to be selected without asserting ATN
sdev->no_start_on_add = 1;
if (*bflags & BLIST_SINGLELUN)
- sdev->single_lun = 1;
-
+ scsi_target(sdev)->single_lun = 1;
sdev->use_10_for_rw = 1;
#ifdef CONFIG_SCSI_LOGGING
/**
- * scsi_inq_str - print INQUIRY data from min to max index,
- * strip trailing whitespace
+ * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
* @buf: Output buffer with at least end-first+1 bytes of space
* @inq: Inquiry buffer (input)
* @first: Offset of string into inq
* scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
* @starget: pointer to target device structure
* @lun: LUN of target device
- * @sdevscan: probe the LUN corresponding to this scsi_device
- * @sdevnew: store the value of any new scsi_device allocated
* @bflagsp: store bflags here if not NULL
+ * @sdevp: probe the LUN corresponding to this scsi_device
+ * @rescan: if nonzero skip some code only needed on first scan
+ * @hostdata: passed to scsi_alloc_sdev()
*
* Description:
* Call scsi_probe_lun, if a LUN with an attached device is found,
* scsi_sequential_lun_scan - sequentially scan a SCSI target
* @starget: pointer to target structure to scan
* @bflags: black/white list flag for LUN 0
+ * @scsi_level: Which version of the standard does this device adhere to
+ * @rescan: passed to scsi_probe_add_lun()
*
* Description:
* Generally, scan from LUN 1 (LUN 0 is assumed to already have been
* Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
* the integer: 0x0b030a04
**/
-static int scsilun_to_int(struct scsi_lun *scsilun)
+int scsilun_to_int(struct scsi_lun *scsilun)
{
int i;
unsigned int lun;
scsilun->scsi_lun[i + 1]) << (i * 8));
return lun;
}
+EXPORT_SYMBOL(scsilun_to_int);
/**
* int_to_scsilun: reverts an int into a scsi_lun
- * @int: integer to be reverted
+ * @lun: integer to be reverted
* @scsilun: struct scsi_lun to be set.
*
* Description:
/**
* scsi_report_lun_scan - Scan using SCSI REPORT LUN results
- * @sdevscan: scan the host, channel, and id of this scsi_device
+ * @starget: which target
+ * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN
+ * @rescan: nonzero if we can skip code only needed on first scan
*
* Description:
- * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN
- * command, and scan the resulting list of LUNs by calling
- * scsi_probe_and_add_lun.
+ * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command.
+ * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun.
*
- * Modifies sdevscan->lun.
+ * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8
+ * LUNs even if it's older than SCSI-3.
+ * If BLIST_NOREPORTLUN is set, return 1 always.
+ * If BLIST_NOLUN is set, return 0 always.
*
* Return:
* 0: scan completed (or no memory, so further scanning is futile)
- * 1: no report lun scan, or not configured
+ * 1: could not scan with REPORT LUN
**/
static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
int rescan)
if (strncmp(scsi_scan_type, "none", 4) == 0)
return ERR_PTR(-ENODEV);
- if (!shost->async_scan)
- scsi_complete_async_scans();
-
starget = scsi_alloc_target(parent, channel, id);
if (!starget)
return ERR_PTR(-ENOMEM);
mutex_lock(&shost->scan_mutex);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
if (scsi_host_scan_allowed(shost))
scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
mutex_unlock(&shost->scan_mutex);
+ transport_configure_device(&starget->dev);
scsi_target_reap(starget);
put_device(&starget->dev);
out_reap:
/* now determine if the target has any children at all
* and if not, nuke it */
+ transport_configure_device(&starget->dev);
scsi_target_reap(starget);
put_device(&starget->dev);
if (strncmp(scsi_scan_type, "none", 4) == 0)
return;
+ mutex_lock(&shost->scan_mutex);
if (!shost->async_scan)
scsi_complete_async_scans();
- mutex_lock(&shost->scan_mutex);
if (scsi_host_scan_allowed(shost))
__scsi_scan_target(parent, channel, id, lun, rescan);
mutex_unlock(&shost->scan_mutex);
"%s: <%u:%u:%u>\n",
__FUNCTION__, channel, id, lun));
- if (!shost->async_scan)
- scsi_complete_async_scans();
-
if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
return -EINVAL;
mutex_lock(&shost->scan_mutex);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
if (scsi_host_scan_allowed(shost)) {
if (channel == SCAN_WILD_CARD)
for (channel = 0; channel <= shost->max_channel;
{
struct scsi_device *sdev;
shost_for_each_device(sdev, shost) {
- if (scsi_sysfs_add_sdev(sdev) != 0)
+ if (!scsi_host_scan_allowed(shost) ||
+ scsi_sysfs_add_sdev(sdev) != 0)
scsi_destroy_sdev(sdev);
}
}
static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
{
struct async_scan_data *data;
+ unsigned long flags;
if (strncmp(scsi_scan_type, "sync", 4) == 0)
return NULL;
goto err;
init_completion(&data->prev_finished);
- spin_lock(&async_scan_lock);
+ mutex_lock(&shost->scan_mutex);
+ spin_lock_irqsave(shost->host_lock, flags);
shost->async_scan = 1;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ mutex_unlock(&shost->scan_mutex);
+
+ spin_lock(&async_scan_lock);
if (list_empty(&scanning_hosts))
complete(&data->prev_finished);
list_add_tail(&data->list, &scanning_hosts);
static void scsi_finish_async_scan(struct async_scan_data *data)
{
struct Scsi_Host *shost;
+ unsigned long flags;
if (!data)
return;
shost = data->shost;
+
+ mutex_lock(&shost->scan_mutex);
+
if (!shost->async_scan) {
printk("%s called twice for host %d", __FUNCTION__,
shost->host_no);
scsi_sysfs_add_devices(shost);
- spin_lock(&async_scan_lock);
+ spin_lock_irqsave(shost->host_lock, flags);
shost->async_scan = 0;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ mutex_unlock(&shost->scan_mutex);
+
+ spin_lock(&async_scan_lock);
list_del(&data->list);
if (!list_empty(&scanning_hosts)) {
struct async_scan_data *next = list_entry(scanning_hosts.next,
**/
void scsi_scan_host(struct Scsi_Host *shost)
{
+ struct task_struct *p;
struct async_scan_data *data;
if (strncmp(scsi_scan_type, "none", 4) == 0)
return;
}
- kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
+ p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
+ if (unlikely(IS_ERR(p)))
+ do_scan_async(data);
}
EXPORT_SYMBOL(scsi_scan_host);
projects / linux-2.6-omap-h63xx.git / blobdiff