/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2006 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
#define ELS_CMD_ADISC 0x52000000
#define ELS_CMD_FARP 0x54000000
#define ELS_CMD_FARPR 0x55000000
+#define ELS_CMD_RPS 0x56000000
+#define ELS_CMD_RPL 0x57000000
#define ELS_CMD_FAN 0x60000000
#define ELS_CMD_RSCN 0x61040000
#define ELS_CMD_SCR 0x62000000
#define ELS_CMD_RNID 0x78000000
+#define ELS_CMD_LIRR 0x7A000000
#else /* __LITTLE_ENDIAN_BITFIELD */
#define ELS_CMD_MASK 0xffff
#define ELS_RSP_MASK 0xff
#define ELS_CMD_ADISC 0x52
#define ELS_CMD_FARP 0x54
#define ELS_CMD_FARPR 0x55
+#define ELS_CMD_RPS 0x56
+#define ELS_CMD_RPL 0x57
#define ELS_CMD_FAN 0x60
#define ELS_CMD_RSCN 0x0461
#define ELS_CMD_SCR 0x62
#define ELS_CMD_RNID 0x78
+#define ELS_CMD_LIRR 0x7A
#endif
/*
} un;
} RNID;
-typedef struct _RRQ { /* Structure is in Big Endian format */
- uint32_t SID;
- uint16_t Oxid;
- uint16_t Rxid;
- uint8_t resv[32]; /* optional association hdr */
-} RRQ;
+typedef struct _RPS { /* Structure is in Big Endian format */
+ union {
+ uint32_t portNum;
+ struct lpfc_name portName;
+ } un;
+} RPS;
+
+typedef struct _RPS_RSP { /* Structure is in Big Endian format */
+ uint16_t rsvd1;
+ uint16_t portStatus;
+ uint32_t linkFailureCnt;
+ uint32_t lossSyncCnt;
+ uint32_t lossSignalCnt;
+ uint32_t primSeqErrCnt;
+ uint32_t invalidXmitWord;
+ uint32_t crcCnt;
+} RPS_RSP;
+
+typedef struct _RPL { /* Structure is in Big Endian format */
+ uint32_t maxsize;
+ uint32_t index;
+} RPL;
+
+typedef struct _PORT_NUM_BLK {
+ uint32_t portNum;
+ uint32_t portID;
+ struct lpfc_name portName;
+} PORT_NUM_BLK;
+
+typedef struct _RPL_RSP { /* Structure is in Big Endian format */
+ uint32_t listLen;
+ uint32_t index;
+ PORT_NUM_BLK port_num_blk;
+} RPL_RSP;
/* This is used for RSCN command */
typedef struct _D_ID { /* Structure is in Big Endian format */
FARP farp; /* Payload for FARP/ACC */
FAN fan; /* Payload for FAN */
SCR scr; /* Payload for SCR/ACC */
- RRQ rrq; /* Payload for RRQ */
RNID rnid; /* Payload for RNID */
uint8_t pad[128 - 4]; /* Pad out to payload of 128 bytes */
} un;
#define MBX_SET_MASK 0x20
#define MBX_SET_SLIM 0x21
#define MBX_UNREG_D_ID 0x23
+#define MBX_KILL_BOARD 0x24
#define MBX_CONFIG_FARP 0x25
+#define MBX_BEACON 0x2A
#define MBX_LOAD_AREA 0x81
#define MBX_RUN_BIU_DIAG64 0x84
uint32_t rttov;
uint32_t altov;
uint32_t lmt;
-#define LMT_RESERVED 0x0 /* Not used */
-#define LMT_266_10bit 0x1 /* 265.625 Mbaud 10 bit iface */
-#define LMT_532_10bit 0x2 /* 531.25 Mbaud 10 bit iface */
-#define LMT_1063_20bit 0x3 /* 1062.5 Mbaud 20 bit iface */
-#define LMT_1063_10bit 0x4 /* 1062.5 Mbaud 10 bit iface */
-#define LMT_2125_10bit 0x8 /* 2125 Mbaud 10 bit iface */
-#define LMT_4250_10bit 0x40 /* 4250 Mbaud 10 bit iface */
+#define LMT_RESERVED 0x000 /* Not used */
+#define LMT_1Gb 0x004
+#define LMT_2Gb 0x008
+#define LMT_4Gb 0x040
+#define LMT_8Gb 0x080
+#define LMT_10Gb 0x100
+
uint32_t rsvd2;
uint32_t rsvd3;