[PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIG

[linux-2.6-omap-h63xx.git] / drivers / scsi / lpfc / lpfc_hw.h

diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 1ea565e0561ffe0432fed2e751a59f21e6ea5d8f..54d04188f7ccaf5d420c6c3ca4b4766c884442f0 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -454,10 +454,13 @@ struct serv_parm {        /* Structure is in Big Endian format */
 #define ELS_CMD_ADISC     0x52000000
 #define ELS_CMD_FARP      0x54000000
 #define ELS_CMD_FARPR     0x55000000
+#define ELS_CMD_RPS       0x56000000
+#define ELS_CMD_RPL       0x57000000
 #define ELS_CMD_FAN       0x60000000
 #define ELS_CMD_RSCN      0x61040000
 #define ELS_CMD_SCR       0x62000000
 #define ELS_CMD_RNID      0x78000000
+#define ELS_CMD_LIRR      0x7A000000
 #else  /*  __LITTLE_ENDIAN_BITFIELD */
 #define ELS_CMD_MASK      0xffff
 #define ELS_RSP_MASK      0xff
@@ -486,10 +489,13 @@ struct serv_parm {        /* Structure is in Big Endian format */
 #define ELS_CMD_ADISC     0x52
 #define ELS_CMD_FARP      0x54
 #define ELS_CMD_FARPR     0x55
+#define ELS_CMD_RPS       0x56
+#define ELS_CMD_RPL       0x57
 #define ELS_CMD_FAN       0x60
 #define ELS_CMD_RSCN      0x0461
 #define ELS_CMD_SCR       0x62
 #define ELS_CMD_RNID      0x78
+#define ELS_CMD_LIRR      0x7A
 #endif
 
 /*
@@ -758,12 +764,40 @@ typedef struct _RNID {            /* Structure is in Big Endian format */
        } un;
 } RNID;
 
-typedef struct _RRQ {          /* Structure is in Big Endian format */
-       uint32_t SID;
-       uint16_t Oxid;
-       uint16_t Rxid;
-       uint8_t resv[32];       /* optional association hdr */
-} RRQ;
+typedef struct  _RPS {         /* Structure is in Big Endian format */
+       union {
+               uint32_t portNum;
+               struct lpfc_name portName;
+       } un;
+} RPS;
+
+typedef struct  _RPS_RSP {     /* Structure is in Big Endian format */
+       uint16_t rsvd1;
+       uint16_t portStatus;
+       uint32_t linkFailureCnt;
+       uint32_t lossSyncCnt;
+       uint32_t lossSignalCnt;
+       uint32_t primSeqErrCnt;
+       uint32_t invalidXmitWord;
+       uint32_t crcCnt;
+} RPS_RSP;
+
+typedef struct  _RPL {         /* Structure is in Big Endian format */
+       uint32_t maxsize;
+       uint32_t index;
+} RPL;
+
+typedef struct  _PORT_NUM_BLK {
+       uint32_t portNum;
+       uint32_t portID;
+       struct lpfc_name portName;
+} PORT_NUM_BLK;
+
+typedef struct  _RPL_RSP {     /* Structure is in Big Endian format */
+       uint32_t listLen;
+       uint32_t index;
+       PORT_NUM_BLK port_num_blk;
+} RPL_RSP;
 
 /* This is used for RSCN command */
 typedef struct _D_ID {         /* Structure is in Big Endian format */
@@ -804,7 +838,6 @@ typedef struct _ELS_PKT {   /* Structure is in Big Endian format */
                FARP farp;      /* Payload for FARP/ACC */
                FAN fan;        /* Payload for FAN */
                SCR scr;        /* Payload for SCR/ACC */
-               RRQ rrq;        /* Payload for RRQ */
                RNID rnid;      /* Payload for RNID */
                uint8_t pad[128 - 4];   /* Pad out to payload of 128 bytes */
        } un;
@@ -1200,7 +1233,9 @@ typedef struct {          /* FireFly BIU registers */
 #define MBX_SET_MASK        0x20
 #define MBX_SET_SLIM        0x21
 #define MBX_UNREG_D_ID      0x23
+#define MBX_KILL_BOARD      0x24
 #define MBX_CONFIG_FARP     0x25
+#define MBX_BEACON          0x2A
 
 #define MBX_LOAD_AREA       0x81
 #define MBX_RUN_BIU_DIAG64  0x84
@@ -1676,13 +1711,13 @@ typedef struct {
        uint32_t rttov;
        uint32_t altov;
        uint32_t lmt;
-#define LMT_RESERVED    0x0    /* Not used */
-#define LMT_266_10bit   0x1    /* 265.625 Mbaud 10 bit iface  */
-#define LMT_532_10bit   0x2    /* 531.25  Mbaud 10 bit iface  */
-#define LMT_1063_20bit  0x3    /* 1062.5   Mbaud 20 bit iface */
-#define LMT_1063_10bit  0x4    /* 1062.5   Mbaud 10 bit iface */
-#define LMT_2125_10bit  0x8    /* 2125     Mbaud 10 bit iface */
-#define LMT_4250_10bit  0x40   /* 4250     Mbaud 10 bit iface */
+#define LMT_RESERVED  0x000    /* Not used */
+#define LMT_1Gb       0x004
+#define LMT_2Gb       0x008
+#define LMT_4Gb       0x040
+#define LMT_8Gb       0x080
+#define LMT_10Gb      0x100
+
 
        uint32_t rsvd2;
        uint32_t rsvd3;