/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2005 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2006 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
int len = 0;
switch (phba->hba_state) {
+ case LPFC_STATE_UNKNOWN:
+ case LPFC_WARM_START:
case LPFC_INIT_START:
case LPFC_INIT_MBX_CMDS:
case LPFC_LINK_DOWN:
return -EIO;
}
+static ssize_t
+lpfc_board_mode_show(struct class_device *cdev, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ char * state;
+
+ if (phba->hba_state == LPFC_HBA_ERROR)
+ state = "error";
+ else if (phba->hba_state == LPFC_WARM_START)
+ state = "warm start";
+ else if (phba->hba_state == LPFC_INIT_START)
+ state = "offline";
+ else
+ state = "online";
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", state);
+}
+
+static ssize_t
+lpfc_board_mode_store(struct class_device *cdev, const char *buf, size_t count)
+{
+ struct Scsi_Host *host = class_to_shost(cdev);
+ struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+ struct completion online_compl;
+ int status=0;
+
+ init_completion(&online_compl);
+
+ if(strncmp(buf, "online", sizeof("online") - 1) == 0)
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_ONLINE);
+ else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_OFFLINE);
+ else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_WARM_START);
+ else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
+ lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_KILL);
+ else
+ return -EINVAL;
+
+ wait_for_completion(&online_compl);
+
+ if (!status)
+ return strlen(buf);
+ else
+ return -EIO;
+}
+
static ssize_t
lpfc_poll_show(struct class_device *cdev, char *buf)
{
NULL);
static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR,
lpfc_board_online_show, lpfc_board_online_store);
+static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
+ lpfc_board_mode_show, lpfc_board_mode_store);
static int lpfc_poll = 0;
module_param(lpfc_poll, int, 0);
/*
# lpfc_topology: link topology for init link
# 0x0 = attempt loop mode then point-to-point
+# 0x01 = internal loopback mode
# 0x02 = attempt point-to-point mode only
# 0x04 = attempt loop mode only
# 0x06 = attempt point-to-point mode then loop
# Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].
# Default value is 0.
*/
-LPFC_ATTR_R(topology, 0, 0, 6, "Select Fibre Channel topology");
+LPFC_ATTR_RW(topology, 0, 0, 6, "Select Fibre Channel topology");
/*
# lpfc_link_speed: Link speed selection for initializing the Fibre Channel
# is 0. Default value of cr_count is 1. The cr_count feature is disabled if
# cr_delay is set to 0.
*/
-LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an"
+LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an "
"interrupt response is generated");
-LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an"
+LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an "
"interrupt response is generated");
/*
# Specifies the maximum number of ELS cmds we can have outstanding (for
# discovery). Value range is [1,64]. Default value = 32.
*/
-LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands"
+LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
"during discovery");
/*
&class_device_attr_nport_evt_cnt,
&class_device_attr_management_version,
&class_device_attr_board_online,
+ &class_device_attr_board_mode,
&class_device_attr_lpfc_poll,
&class_device_attr_lpfc_poll_tmo,
NULL,
case MBX_DUMP_MEMORY:
case MBX_DOWN_LOAD:
case MBX_UPDATE_CFG:
+ case MBX_KILL_BOARD:
case MBX_LOAD_AREA:
case MBX_LOAD_EXP_ROM:
+ case MBX_BEACON:
+ case MBX_DEL_LD_ENTRY:
break;
case MBX_READ_SPARM64:
case MBX_READ_LA:
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
else {
switch (phba->hba_state) {
+ case LPFC_STATE_UNKNOWN:
+ case LPFC_WARM_START:
case LPFC_INIT_START:
case LPFC_INIT_MBX_CMDS:
case LPFC_LINK_DOWN: