[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.

[linux-2.6-omap-h63xx.git] / drivers / scsi / lpfc / lpfc.h

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 38ffa8d6e62901ed94231c45c42571750308e107..c4cca9124f458d03fbca1e5b75ca6ddf8e36b2f7 100644 (file)
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -121,7 +121,9 @@ struct lpfc_stats {
        uint32_t elsRcvLOGO;
        uint32_t elsRcvPRLO;
        uint32_t elsRcvPRLI;
-       uint32_t elsRcvRRQ;
+       uint32_t elsRcvLIRR;
+       uint32_t elsRcvRPS;
+       uint32_t elsRcvRPL;
        uint32_t elsXmitFLOGI;
        uint32_t elsXmitPLOGI;
        uint32_t elsXmitPRLI;
@@ -167,32 +169,33 @@ struct lpfc_sysfs_mbox {
 };
 
 struct lpfc_hba {
-       struct list_head hba_list;      /* List of hbas/ports */
        struct lpfc_sli sli;
        struct lpfc_sli2_slim *slim2p;
        dma_addr_t slim2p_mapping;
        uint16_t pci_cfg_value;
 
        struct semaphore hba_can_block;
-       uint32_t hba_state;
-
-#define LPFC_INIT_START           1    /* Initial state after board reset */
-#define LPFC_INIT_MBX_CMDS        2    /* Initialize HBA with mbox commands */
-#define LPFC_LINK_DOWN            3    /* HBA initialized, link is down */
-#define LPFC_LINK_UP              4    /* Link is up  - issue READ_LA */
-#define LPFC_LOCAL_CFG_LINK       5    /* local NPORT Id configured */
-#define LPFC_FLOGI                6    /* FLOGI sent to Fabric */
-#define LPFC_FABRIC_CFG_LINK      7    /* Fabric assigned NPORT Id
+       int32_t hba_state;
+
+#define LPFC_STATE_UNKNOWN        0    /* HBA state is unknown */
+#define LPFC_WARM_START           1    /* HBA state after selective reset */
+#define LPFC_INIT_START           2    /* Initial state after board reset */
+#define LPFC_INIT_MBX_CMDS        3    /* Initialize HBA with mbox commands */
+#define LPFC_LINK_DOWN            4    /* HBA initialized, link is down */
+#define LPFC_LINK_UP              5    /* Link is up  - issue READ_LA */
+#define LPFC_LOCAL_CFG_LINK       6    /* local NPORT Id configured */
+#define LPFC_FLOGI                7    /* FLOGI sent to Fabric */
+#define LPFC_FABRIC_CFG_LINK      8    /* Fabric assigned NPORT Id
                                           configured */
-#define LPFC_NS_REG               8    /* Register with NameServer */
-#define LPFC_NS_QRY               9    /* Query NameServer for NPort ID list */
-#define LPFC_BUILD_DISC_LIST      10   /* Build ADISC and PLOGI lists for
+#define LPFC_NS_REG               9    /* Register with NameServer */
+#define LPFC_NS_QRY               10   /* Query NameServer for NPort ID list */
+#define LPFC_BUILD_DISC_LIST      11   /* Build ADISC and PLOGI lists for
                                         * device authentication / discovery */
-#define LPFC_DISC_AUTH            11   /* Processing ADISC list */
-#define LPFC_CLEAR_LA             12   /* authentication cmplt - issue
+#define LPFC_DISC_AUTH            12   /* Processing ADISC list */
+#define LPFC_CLEAR_LA             13   /* authentication cmplt - issue
                                           CLEAR_LA */
 #define LPFC_HBA_READY            32
-#define LPFC_HBA_ERROR            0xff
+#define LPFC_HBA_ERROR            -1
 
        uint8_t fc_linkspeed;   /* Link speed after last READ_LA */
 
@@ -245,6 +248,7 @@ struct lpfc_hba {
 #define FC_SCSI_SCAN_TMO        0x4000 /* scsi scan timer running */
 #define FC_ABORT_DISCOVERY      0x8000 /* we want to abort discovery */
 #define FC_NDISC_ACTIVE         0x10000        /* NPort discovery active */
+#define FC_BYPASSED_MODE        0x20000        /* NPort is in bypassed mode */
 
        uint32_t fc_topology;   /* link topology, from LINK INIT */
 
@@ -290,7 +294,6 @@ struct lpfc_hba {
        uint32_t cfg_cr_delay;
        uint32_t cfg_cr_count;
        uint32_t cfg_fdmi_on;
-       uint32_t cfg_fcp_bind_method;
        uint32_t cfg_discovery_threads;
        uint32_t cfg_max_luns;
        uint32_t cfg_poll;