]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/scsi/aic7xxx/aic7xxx_core.c
[SCSI] aic7xxx, aic79xx: deinline functions
[linux-2.6-omap-h63xx.git] / drivers / scsi / aic7xxx / aic7xxx_core.c
index 64e62ce59c152fbedf5495021d0b7d3a6f9e536e..d1d006b8b3a96c36b0fcdb5f7545c947c9370858 100644 (file)
@@ -237,6 +237,510 @@ static void               ahc_update_scsiid(struct ahc_softc *ahc,
 static int             ahc_handle_target_cmd(struct ahc_softc *ahc,
                                              struct target_cmd *cmd);
 #endif
+
+/************************* Sequencer Execution Control ************************/
+/*
+ * Work around any chip bugs related to halting sequencer execution.
+ * On Ultra2 controllers, we must clear the CIOBUS stretch signal by
+ * reading a register that will set this signal and deassert it.
+ * Without this workaround, if the chip is paused, by an interrupt or
+ * manual pause while accessing scb ram, accesses to certain registers
+ * will hang the system (infinite pci retries).
+ */
+void
+ahc_pause_bug_fix(struct ahc_softc *ahc)
+{
+       if ((ahc->features & AHC_ULTRA2) != 0)
+               (void)ahc_inb(ahc, CCSCBCTL);
+}
+
+/*
+ * Determine whether the sequencer has halted code execution.
+ * Returns non-zero status if the sequencer is stopped.
+ */
+int
+ahc_is_paused(struct ahc_softc *ahc)
+{
+       return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
+}
+
+/*
+ * Request that the sequencer stop and wait, indefinitely, for it
+ * to stop.  The sequencer will only acknowledge that it is paused
+ * once it has reached an instruction boundary and PAUSEDIS is
+ * cleared in the SEQCTL register.  The sequencer may use PAUSEDIS
+ * for critical sections.
+ */
+void
+ahc_pause(struct ahc_softc *ahc)
+{
+       ahc_outb(ahc, HCNTRL, ahc->pause);
+
+       /*
+        * Since the sequencer can disable pausing in a critical section, we
+        * must loop until it actually stops.
+        */
+       while (ahc_is_paused(ahc) == 0)
+               ;
+
+       ahc_pause_bug_fix(ahc);
+}
+
+/*
+ * Allow the sequencer to continue program execution.
+ * We check here to ensure that no additional interrupt
+ * sources that would cause the sequencer to halt have been
+ * asserted.  If, for example, a SCSI bus reset is detected
+ * while we are fielding a different, pausing, interrupt type,
+ * we don't want to release the sequencer before going back
+ * into our interrupt handler and dealing with this new
+ * condition.
+ */
+void
+ahc_unpause(struct ahc_softc *ahc)
+{
+       if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
+               ahc_outb(ahc, HCNTRL, ahc->unpause);
+}
+
+/************************** Memory mapping routines ***************************/
+struct ahc_dma_seg *
+ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
+{
+       int sg_index;
+
+       sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
+       /* sg_list_phys points to entry 1, not 0 */
+       sg_index++;
+
+       return (&scb->sg_list[sg_index]);
+}
+
+uint32_t
+ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
+{
+       int sg_index;
+
+       /* sg_list_phys points to entry 1, not 0 */
+       sg_index = sg - &scb->sg_list[1];
+
+       return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
+}
+
+uint32_t
+ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
+{
+       return (ahc->scb_data->hscb_busaddr
+               + (sizeof(struct hardware_scb) * index));
+}
+
+void
+ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op)
+{
+       ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat,
+                       ahc->scb_data->hscb_dmamap,
+                       /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb),
+                       /*len*/sizeof(*scb->hscb), op);
+}
+
+void
+ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op)
+{
+       if (scb->sg_count == 0)
+               return;
+
+       ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap,
+                       /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr)
+                               * sizeof(struct ahc_dma_seg),
+                       /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op);
+}
+
+uint32_t
+ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
+{
+       return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+/*
+ * Determine whether the sequencer reported a residual
+ * for this SCB/transaction.
+ */
+void
+ahc_update_residual(struct ahc_softc *ahc, struct scb *scb)
+{
+       uint32_t sgptr;
+
+       sgptr = ahc_le32toh(scb->hscb->sgptr);
+       if ((sgptr & SG_RESID_VALID) != 0)
+               ahc_calc_residual(ahc, scb);
+}
+
+/*
+ * Return pointers to the transfer negotiation information
+ * for the specified our_id/remote_id pair.
+ */
+struct ahc_initiator_tinfo *
+ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
+                   u_int remote_id, struct ahc_tmode_tstate **tstate)
+{
+       /*
+        * Transfer data structures are stored from the perspective
+        * of the target role.  Since the parameters for a connection
+        * in the initiator role to a given target are the same as
+        * when the roles are reversed, we pretend we are the target.
+        */
+       if (channel == 'B')
+               our_id += 8;
+       *tstate = ahc->enabled_targets[our_id];
+       return (&(*tstate)->transinfo[remote_id]);
+}
+
+uint16_t
+ahc_inw(struct ahc_softc *ahc, u_int port)
+{
+       uint16_t r = ahc_inb(ahc, port+1) << 8;
+       return r | ahc_inb(ahc, port);
+}
+
+void
+ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
+{
+       ahc_outb(ahc, port, value & 0xFF);
+       ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahc_inl(struct ahc_softc *ahc, u_int port)
+{
+       return ((ahc_inb(ahc, port))
+             | (ahc_inb(ahc, port+1) << 8)
+             | (ahc_inb(ahc, port+2) << 16)
+             | (ahc_inb(ahc, port+3) << 24));
+}
+
+void
+ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
+{
+       ahc_outb(ahc, port, (value) & 0xFF);
+       ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
+       ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
+       ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahc_inq(struct ahc_softc *ahc, u_int port)
+{
+       return ((ahc_inb(ahc, port))
+             | (ahc_inb(ahc, port+1) << 8)
+             | (ahc_inb(ahc, port+2) << 16)
+             | (ahc_inb(ahc, port+3) << 24)
+             | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
+             | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
+             | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
+             | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
+}
+
+void
+ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
+{
+       ahc_outb(ahc, port, value & 0xFF);
+       ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+       ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
+       ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
+       ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
+       ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
+       ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
+       ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
+}
+
+/*
+ * Get a free scb. If there are none, see if we can allocate a new SCB.
+ */
+struct scb *
+ahc_get_scb(struct ahc_softc *ahc)
+{
+       struct scb *scb;
+
+       if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
+               ahc_alloc_scbs(ahc);
+               scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
+               if (scb == NULL)
+                       return (NULL);
+       }
+       SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
+       return (scb);
+}
+
+/*
+ * Return an SCB resource to the free list.
+ */
+void
+ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+       struct hardware_scb *hscb;
+
+       hscb = scb->hscb;
+       /* Clean up for the next user */
+       ahc->scb_data->scbindex[hscb->tag] = NULL;
+       scb->flags = SCB_FREE;
+       hscb->control = 0;
+
+       SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
+
+       /* Notify the OSM that a resource is now available. */
+       ahc_platform_scb_free(ahc, scb);
+}
+
+struct scb *
+ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
+{
+       struct scb* scb;
+
+       scb = ahc->scb_data->scbindex[tag];
+       if (scb != NULL)
+               ahc_sync_scb(ahc, scb,
+                            BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+       return (scb);
+}
+
+void
+ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
+{
+       struct hardware_scb *q_hscb;
+       u_int  saved_tag;
+
+       /*
+        * Our queuing method is a bit tricky.  The card
+        * knows in advance which HSCB to download, and we
+        * can't disappoint it.  To achieve this, the next
+        * SCB to download is saved off in ahc->next_queued_scb.
+        * When we are called to queue "an arbitrary scb",
+        * we copy the contents of the incoming HSCB to the one
+        * the sequencer knows about, swap HSCB pointers and
+        * finally assign the SCB to the tag indexed location
+        * in the scb_array.  This makes sure that we can still
+        * locate the correct SCB by SCB_TAG.
+        */
+       q_hscb = ahc->next_queued_scb->hscb;
+       saved_tag = q_hscb->tag;
+       memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+       if ((scb->flags & SCB_CDB32_PTR) != 0) {
+               q_hscb->shared_data.cdb_ptr =
+                   ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
+                             + offsetof(struct hardware_scb, cdb32));
+       }
+       q_hscb->tag = saved_tag;
+       q_hscb->next = scb->hscb->tag;
+
+       /* Now swap HSCB pointers. */
+       ahc->next_queued_scb->hscb = scb->hscb;
+       scb->hscb = q_hscb;
+
+       /* Now define the mapping from tag to SCB in the scbindex */
+       ahc->scb_data->scbindex[scb->hscb->tag] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+       ahc_swap_with_next_hscb(ahc, scb);
+
+       if (scb->hscb->tag == SCB_LIST_NULL
+        || scb->hscb->next == SCB_LIST_NULL)
+               panic("Attempt to queue invalid SCB tag %x:%x\n",
+                     scb->hscb->tag, scb->hscb->next);
+
+       /*
+        * Setup data "oddness".
+        */
+       scb->hscb->lun &= LID;
+       if (ahc_get_transfer_length(scb) & 0x1)
+               scb->hscb->lun |= SCB_XFERLEN_ODD;
+
+       /*
+        * Keep a history of SCBs we've downloaded in the qinfifo.
+        */
+       ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
+
+       /*
+        * Make sure our data is consistent from the
+        * perspective of the adapter.
+        */
+       ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+       /* Tell the adapter about the newly queued SCB */
+       if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+               ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+       } else {
+               if ((ahc->features & AHC_AUTOPAUSE) == 0)
+                       ahc_pause(ahc);
+               ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+               if ((ahc->features & AHC_AUTOPAUSE) == 0)
+                       ahc_unpause(ahc);
+       }
+}
+
+struct scsi_sense_data *
+ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb)
+{
+       int offset;
+
+       offset = scb - ahc->scb_data->scbarray;
+       return (&ahc->scb_data->sense[offset]);
+}
+
+uint32_t
+ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb)
+{
+       int offset;
+
+       offset = scb - ahc->scb_data->scbarray;
+       return (ahc->scb_data->sense_busaddr
+             + (offset * sizeof(struct scsi_sense_data)));
+}
+
+/************************** Interrupt Processing ******************************/
+void
+ahc_sync_qoutfifo(struct ahc_softc *ahc, int op)
+{
+       ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+                       /*offset*/0, /*len*/256, op);
+}
+
+void
+ahc_sync_tqinfifo(struct ahc_softc *ahc, int op)
+{
+#ifdef AHC_TARGET_MODE
+       if ((ahc->flags & AHC_TARGETROLE) != 0) {
+               ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+                               ahc->shared_data_dmamap,
+                               ahc_targetcmd_offset(ahc, 0),
+                               sizeof(struct target_cmd) * AHC_TMODE_CMDS,
+                               op);
+       }
+#endif
+}
+
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHC_RUN_QOUTFIFO 0x1
+#define AHC_RUN_TQINFIFO 0x2
+u_int
+ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
+{
+       u_int retval;
+
+       retval = 0;
+       ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+                       /*offset*/ahc->qoutfifonext, /*len*/1,
+                       BUS_DMASYNC_POSTREAD);
+       if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
+               retval |= AHC_RUN_QOUTFIFO;
+#ifdef AHC_TARGET_MODE
+       if ((ahc->flags & AHC_TARGETROLE) != 0
+        && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
+               ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+                               ahc->shared_data_dmamap,
+                               ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
+                               /*len*/sizeof(struct target_cmd),
+                               BUS_DMASYNC_POSTREAD);
+               if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
+                       retval |= AHC_RUN_TQINFIFO;
+       }
+#endif
+       return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahc_intr(struct ahc_softc *ahc)
+{
+       u_int   intstat;
+
+       if ((ahc->pause & INTEN) == 0) {
+               /*
+                * Our interrupt is not enabled on the chip
+                * and may be disabled for re-entrancy reasons,
+                * so just return.  This is likely just a shared
+                * interrupt.
+                */
+               return (0);
+       }
+       /*
+        * Instead of directly reading the interrupt status register,
+        * infer the cause of the interrupt by checking our in-core
+        * completion queues.  This avoids a costly PCI bus read in
+        * most cases.
+        */
+       if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
+        && (ahc_check_cmdcmpltqueues(ahc) != 0))
+               intstat = CMDCMPLT;
+       else {
+               intstat = ahc_inb(ahc, INTSTAT);
+       }
+
+       if ((intstat & INT_PEND) == 0) {
+#if AHC_PCI_CONFIG > 0
+               if (ahc->unsolicited_ints > 500) {
+                       ahc->unsolicited_ints = 0;
+                       if ((ahc->chip & AHC_PCI) != 0
+                        && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
+                               ahc->bus_intr(ahc);
+               }
+#endif
+               ahc->unsolicited_ints++;
+               return (0);
+       }
+       ahc->unsolicited_ints = 0;
+
+       if (intstat & CMDCMPLT) {
+               ahc_outb(ahc, CLRINT, CLRCMDINT);
+
+               /*
+                * Ensure that the chip sees that we've cleared
+                * this interrupt before we walk the output fifo.
+                * Otherwise, we may, due to posted bus writes,
+                * clear the interrupt after we finish the scan,
+                * and after the sequencer has added new entries
+                * and asserted the interrupt again.
+                */
+               ahc_flush_device_writes(ahc);
+               ahc_run_qoutfifo(ahc);
+#ifdef AHC_TARGET_MODE
+               if ((ahc->flags & AHC_TARGETROLE) != 0)
+                       ahc_run_tqinfifo(ahc, /*paused*/FALSE);
+#endif
+       }
+
+       /*
+        * Handle statuses that may invalidate our cached
+        * copy of INTSTAT separately.
+        */
+       if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
+               /* Hot eject.  Do nothing */
+       } else if (intstat & BRKADRINT) {
+               ahc_handle_brkadrint(ahc);
+       } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
+
+               ahc_pause_bug_fix(ahc);
+
+               if ((intstat & SEQINT) != 0)
+                       ahc_handle_seqint(ahc, intstat);
+
+               if ((intstat & SCSIINT) != 0)
+                       ahc_handle_scsiint(ahc, intstat);
+       }
+       return (1);
+}
+
 /************************* Sequencer Execution Control ************************/
 /*
  * Restart the sequencer program from address zero
@@ -2655,7 +3159,7 @@ proto_violation_reset:
  */
 static void
 ahc_handle_message_phase(struct ahc_softc *ahc)
-{ 
+{
        struct  ahc_devinfo devinfo;
        u_int   bus_phase;
        int     end_session;
@@ -5707,7 +6211,7 @@ ahc_add_curscb_to_free_list(struct ahc_softc *ahc)
  */
 static u_int
 ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev)
-{       
+{
        u_int curscb, next;
 
        /*