[SCSI] remove m68k NCR53C9x based drivers

[linux-2.6-omap-h63xx.git] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 14fc7f39e83e0be1ad26267daad4853544775223..510bedb375757575cd689ce374429781e3f9ad84 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -350,17 +350,6 @@ config SGIWD93_SCSI
          If you have a Western Digital WD93 SCSI controller on
          an SGI MIPS system, say Y.  Otherwise, say N.
 
-config SCSI_DECNCR
-       tristate "DEC NCR53C94 Scsi Driver"
-       depends on MACH_DECSTATION && SCSI && TC
-       help
-         Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
-         based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
-
-config SCSI_DECSII
-       tristate "DEC SII Scsi Driver"
-       depends on MACH_DECSTATION && SCSI && 32BIT
-
 config BLK_DEV_3W_XXXX_RAID
        tristate "3ware 5/6/7/8xxx ATA-RAID support"
        depends on PCI && SCSI
@@ -1263,17 +1252,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
          not allow targets to disconnect is not reasonable if there is more
          than 1 device on a SCSI bus. The normal answer therefore is N.
 
-config SCSI_MCA_53C9X
-       tristate "NCR MCA 53C9x SCSI support"
-       depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP
-       help
-         Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
-         controller based on the NCR 53C94.  This driver will allow use of
-         the controller on the 3550, and very possibly others.
-
-         To compile this driver as a module, choose M here: the
-         module will be called mca_53c9x.
-
 config SCSI_PAS16
        tristate "PAS16 SCSI support"
        depends on ISA && SCSI
@@ -1600,45 +1578,6 @@ config GVP11_SCSI
          To compile this driver as a module, choose M here: the
          module will be called gvp11.
 
-config CYBERSTORM_SCSI
-       tristate "CyberStorm SCSI support"
-       depends on ZORRO && SCSI
-       help
-         If you have an Amiga with an original (MkI) Phase5 Cyberstorm
-         accelerator board and the optional Cyberstorm SCSI controller,
-         answer Y. Otherwise, say N.
-
-config CYBERSTORMII_SCSI
-       tristate "CyberStorm Mk II SCSI support"
-       depends on ZORRO && SCSI
-       help
-         If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
-         and the optional Cyberstorm SCSI controller, say Y. Otherwise,
-         answer N.
-
-config BLZ2060_SCSI
-       tristate "Blizzard 2060 SCSI support"
-       depends on ZORRO && SCSI
-       help
-         If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
-         and want to use the onboard SCSI controller, say Y. Otherwise,
-         answer N.
-
-config BLZ1230_SCSI
-       tristate "Blizzard 1230IV/1260 SCSI support"
-       depends on ZORRO && SCSI
-       help
-         If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
-         1260 accelerator, and the optional SCSI module, say Y. Otherwise,
-         say N.
-
-config FASTLANE_SCSI
-       tristate "Fastlane SCSI support"
-       depends on ZORRO && SCSI
-       help
-         If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
-         one in the near future, say Y to this question. Otherwise, say N.
-
 config SCSI_A4000T
        tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)"
        depends on AMIGA && SCSI && EXPERIMENTAL
@@ -1666,15 +1605,6 @@ config SCSI_ZORRO7XX
              accelerator card for the Amiga 1200,
            - the SCSI controller on the GVP Turbo 040/060 accelerator.
 
-config OKTAGON_SCSI
-       tristate "BSC Oktagon SCSI support (EXPERIMENTAL)"
-       depends on ZORRO && SCSI && EXPERIMENTAL
-       help
-         If you have the BSC Oktagon SCSI disk controller for the Amiga, say
-         Y to this question.  If you're in doubt about whether you have one,
-         see the picture at
-         <http://amiga.resource.cx/exp/search.pl?product=oktagon>.
-
 config ATARI_SCSI
        tristate "Atari native SCSI support"
        depends on ATARI && SCSI
@@ -1727,18 +1657,6 @@ config MAC_SCSI
          SCSI-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
 
-config SCSI_MAC_ESP
-       tristate "Macintosh NCR53c9[46] SCSI"
-       depends on MAC && SCSI
-       help
-         This is the NCR 53c9x SCSI controller found on most of the 68040
-         based Macintoshes.  If you have one of these say Y and read the
-         SCSI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here: the
-         module will be called mac_esp.
-
 config MVME147_SCSI
        bool "WD33C93 SCSI driver for MVME147"
        depends on MVME147 && SCSI=y
@@ -1779,6 +1697,7 @@ config SUN3_SCSI
 config SUN3X_ESP
        bool "Sun3x ESP SCSI"
        depends on SUN3X && SCSI=y
+       select SCSI_SPI_ATTRS
        help
          The ESP was an on-board SCSI controller used on Sun 3/80
          machines.  Say Y here to compile in support for it.