* Stefan Bader <shbader@de.ibm.com>
*/
+#define KMSG_COMPONENT "tape"
#include <linux/module.h>
#include <linux/init.h> // for kernel parameters
#include <linux/kmod.h> // for requesting modules
#include "tape.h"
#include "tape_std.h"
-#define PRINTK_HEADER "TAPE_CORE: "
#define LONG_BUSY_TIMEOUT 180 /* seconds */
static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *);
switch(newstate){
case MS_UNLOADED:
device->tape_generic_status |= GMT_DR_OPEN(~0);
- PRINT_INFO("(%s): Tape is unloaded\n",
- dev_name(&device->cdev->dev));
+ dev_info(&device->cdev->dev, "The tape cartridge has been "
+ "successfully unloaded\n");
break;
case MS_LOADED:
device->tape_generic_status &= ~GMT_DR_OPEN(~0);
- PRINT_INFO("(%s): Tape has been mounted\n",
- dev_name(&device->cdev->dev));
+ dev_info(&device->cdev->dev, "A tape cartridge has been "
+ "mounted\n");
break;
default:
// print nothing
/* Let the discipline have a go at the device. */
device->discipline = discipline;
if (!try_module_get(discipline->owner)) {
- PRINT_ERR("Cannot get module. Module gone.\n");
return -EINVAL;
}
tape_generic_offline(struct tape_device *device)
{
if (!device) {
- PRINT_ERR("tape_generic_offline: no such device\n");
return -ENODEV;
}
DBF_EVENT(3, "(%08x): Set offline failed "
"- drive in use.\n",
device->cdev_id);
- PRINT_WARN("(%s): Set offline failed "
- "- drive in use.\n",
- dev_name(&device->cdev->dev));
spin_unlock_irq(get_ccwdev_lock(device->cdev));
return -EBUSY;
}
device = kzalloc(sizeof(struct tape_device), GFP_KERNEL);
if (device == NULL) {
DBF_EXCEPTION(2, "ti:no mem\n");
- PRINT_INFO ("can't allocate memory for "
- "tape info structure\n");
return ERR_PTR(-ENOMEM);
}
device->modeset_byte = kmalloc(1, GFP_KERNEL | GFP_DMA);
if (device->modeset_byte == NULL) {
DBF_EXCEPTION(2, "ti:no mem\n");
- PRINT_INFO("can't allocate memory for modeset byte\n");
kfree(device);
return ERR_PTR(-ENOMEM);
}
} else {
if (remain < 0) {
DBF_EVENT(4, "put device without reference\n");
- PRINT_ERR("put device without reference\n");
} else {
DBF_EVENT(4, "tape_free_device(%p)\n", device);
kfree(device->modeset_byte);
ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
if (ret) {
tape_put_device(device);
- PRINT_ERR("probe failed for tape device %s\n",
- dev_name(&cdev->dev));
return ret;
}
cdev->dev.driver_data = device;
device->cdev = cdev;
ccw_device_get_id(cdev, &dev_id);
device->cdev_id = devid_to_int(&dev_id);
- PRINT_INFO("tape device %s found\n", dev_name(&cdev->dev));
return ret;
}
device = cdev->dev.driver_data;
if (!device) {
- PRINT_ERR("No device pointer in tape_generic_remove!\n");
return;
}
DBF_LH(3, "(%08x): tape_generic_remove(%p)\n", device->cdev_id, cdev);
*/
DBF_EVENT(3, "(%08x): Drive in use vanished!\n",
device->cdev_id);
- PRINT_WARN("(%s): Drive in use vanished - "
- "expect trouble!\n",
- dev_name(&device->cdev->dev));
- PRINT_WARN("State was %i\n", device->tape_state);
+ dev_warn(&device->cdev->dev, "A tape unit was detached"
+ " while in use\n");
tape_state_set(device, TS_NOT_OPER);
__tape_discard_requests(device);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
{
struct tape_request *request;
- if (datasize > PAGE_SIZE || (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
- BUG();
+ BUG_ON(datasize > PAGE_SIZE || (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
DBF_LH(6, "tape_alloc_request(%d, %d)\n", cplength, datasize);
device = (struct tape_device *) data;
spin_lock_irq(get_ccwdev_lock(device->cdev));
request = list_entry(device->req_queue.next, struct tape_request, list);
- if (request->status != TAPE_REQUEST_LONG_BUSY)
- BUG();
+ BUG_ON(request->status != TAPE_REQUEST_LONG_BUSY);
DBF_LH(6, "%08x: Long busy timeout.\n", device->cdev_id);
__tape_start_next_request(device);
device->lb_timeout.data = (unsigned long) tape_put_device(device);
__tape_start_next_request(device);
}
-/*
- * Write sense data to console/dbf
- */
-void
-tape_dump_sense(struct tape_device* device, struct tape_request *request,
- struct irb *irb)
-{
- unsigned int *sptr;
-
- PRINT_INFO("-------------------------------------------------\n");
- PRINT_INFO("DSTAT : %02x CSTAT: %02x CPA: %04x\n",
- irb->scsw.cmd.dstat, irb->scsw.cmd.cstat, irb->scsw.cmd.cpa);
- PRINT_INFO("DEVICE: %s\n", dev_name(&device->cdev->dev));
- if (request != NULL)
- PRINT_INFO("OP : %s\n", tape_op_verbose[request->op]);
-
- sptr = (unsigned int *) irb->ecw;
- PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
- sptr[0], sptr[1], sptr[2], sptr[3]);
- PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
- sptr[4], sptr[5], sptr[6], sptr[7]);
- PRINT_INFO("--------------------------------------------------\n");
-}
-
/*
* Write sense data to dbf
*/
device = (struct tape_device *) cdev->dev.driver_data;
if (device == NULL) {
- PRINT_ERR("could not get device structure for %s "
- "in interrupt\n", dev_name(&cdev->dev));
return;
}
request = (struct tape_request *) intparm;
/* FIXME: What to do with the request? */
switch (PTR_ERR(irb)) {
case -ETIMEDOUT:
- PRINT_WARN("(%s): Request timed out\n",
+ DBF_LH(1, "(%s): Request timed out\n",
dev_name(&cdev->dev));
case -EIO:
__tape_end_request(device, request, -EIO);
break;
default:
- PRINT_ERR("(%s): Unexpected i/o error %li\n",
+ DBF_LH(1, "(%s): Unexpected i/o error %li\n",
dev_name(&cdev->dev),
PTR_ERR(irb));
}
default:
if (rc > 0) {
DBF_EVENT(6, "xunknownrc\n");
- PRINT_ERR("Invalid return code from discipline "
- "interrupt function.\n");
__tape_end_request(device, request, -EIO);
} else {
__tape_end_request(device, request, rc);
EXPORT_SYMBOL(tape_med_state_set);
EXPORT_SYMBOL(tape_alloc_request);
EXPORT_SYMBOL(tape_free_request);
-EXPORT_SYMBOL(tape_dump_sense);
EXPORT_SYMBOL(tape_dump_sense_dbf);
EXPORT_SYMBOL(tape_do_io);
EXPORT_SYMBOL(tape_do_io_async);
projects / linux-2.6-omap-h63xx.git / blobdiff