]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - drivers/rtc/rtc-cmos.c
rtc-cmos: fix boot log message
[linux-2.6-omap-h63xx.git] / drivers / rtc / rtc-cmos.c
index f1695d7fa0fa2f15f08d3efd18932df819568379..6cf8e282338f5cb5cfedeb94bf9cb7ecd1ca79d3 100644 (file)
@@ -240,26 +240,26 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
        /* REVISIT this assumes PC style usage:  always BCD */
 
        if (((unsigned)t->time.tm_sec) < 0x60)
-               t->time.tm_sec = BCD2BIN(t->time.tm_sec);
+               t->time.tm_sec = bcd2bin(t->time.tm_sec);
        else
                t->time.tm_sec = -1;
        if (((unsigned)t->time.tm_min) < 0x60)
-               t->time.tm_min = BCD2BIN(t->time.tm_min);
+               t->time.tm_min = bcd2bin(t->time.tm_min);
        else
                t->time.tm_min = -1;
        if (((unsigned)t->time.tm_hour) < 0x24)
-               t->time.tm_hour = BCD2BIN(t->time.tm_hour);
+               t->time.tm_hour = bcd2bin(t->time.tm_hour);
        else
                t->time.tm_hour = -1;
 
        if (cmos->day_alrm) {
                if (((unsigned)t->time.tm_mday) <= 0x31)
-                       t->time.tm_mday = BCD2BIN(t->time.tm_mday);
+                       t->time.tm_mday = bcd2bin(t->time.tm_mday);
                else
                        t->time.tm_mday = -1;
                if (cmos->mon_alrm) {
                        if (((unsigned)t->time.tm_mon) <= 0x12)
-                               t->time.tm_mon = BCD2BIN(t->time.tm_mon) - 1;
+                               t->time.tm_mon = bcd2bin(t->time.tm_mon) - 1;
                        else
                                t->time.tm_mon = -1;
                }
@@ -331,19 +331,19 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
        /* Writing 0xff means "don't care" or "match all".  */
 
        mon = t->time.tm_mon + 1;
-       mon = (mon <= 12) ? BIN2BCD(mon) : 0xff;
+       mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
 
        mday = t->time.tm_mday;
-       mday = (mday >= 1 && mday <= 31) ? BIN2BCD(mday) : 0xff;
+       mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
 
        hrs = t->time.tm_hour;
-       hrs = (hrs < 24) ? BIN2BCD(hrs) : 0xff;
+       hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
 
        min = t->time.tm_min;
-       min = (min < 60) ? BIN2BCD(min) : 0xff;
+       min = (min < 60) ? bin2bcd(min) : 0xff;
 
        sec = t->time.tm_sec;
-       sec = (sec < 60) ? BIN2BCD(sec) : 0xff;
+       sec = (sec < 60) ? bin2bcd(sec) : 0xff;
 
        spin_lock_irq(&rtc_lock);
 
@@ -592,7 +592,6 @@ static struct bin_attribute nvram = {
        .attr = {
                .name   = "nvram",
                .mode   = S_IRUGO | S_IWUSR,
-               .owner  = THIS_MODULE,
        },
 
        .read   = cmos_nvram_read,
@@ -795,7 +794,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
                goto cleanup2;
        }
 
-       pr_info("%s: alarms up to one %s%s, %zd bytes nvram, %s irqs\n",
+       pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
                        cmos_rtc.rtc->dev.bus_id,
                        is_valid_irq(rtc_irq)
                                ?  (cmos_rtc.mon_alrm