res->end = res->start + sz64;
#else
if (sz64 > 0x100000000ULL) {
- printk(KERN_ERR "PCI: Unable to handle 64-bit "
- "BAR for device %s\n", pci_name(dev));
+ dev_err(&dev->dev, "BAR %d: can't handle 64-bit"
+ " BAR\n", pos);
res->start = 0;
res->flags = 0;
} else if (lhi) {
return;
if (dev->transparent) {
- printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
+ dev_info(&dev->dev, "transparent bridge\n");
for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
child->resource[i] = child->parent->resource[i - 3];
}
limit |= ((long) mem_limit_hi) << 32;
#else
if (mem_base_hi || mem_limit_hi) {
- printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
+ dev_err(&dev->dev, "can't handle 64-bit "
+ "address space for bridge\n");
return;
}
#endif
INIT_LIST_HEAD(&b->node);
INIT_LIST_HEAD(&b->children);
INIT_LIST_HEAD(&b->devices);
+ INIT_LIST_HEAD(&b->slots);
}
return b;
}
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
- pci_name(dev), buses & 0xffffff, pass);
+ dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
+ buses & 0xffffff, pass);
/* Disable MasterAbortMode during probing to avoid reporting
of bus errors (in some architectures) */
* ignore it. This can happen with the i450NX chipset.
*/
if (pci_find_bus(pci_domain_nr(bus), busnr)) {
- printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
- pci_domain_nr(bus), busnr);
+ dev_info(&dev->dev, "bus %04x:%02x already known\n",
+ pci_domain_nr(bus), busnr);
goto out;
}
{
u32 class;
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
+ dev->bus->number, PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn));
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->revision = class & 0xff;
dev->class = class;
class >>= 8;
- pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+ dev_dbg(&dev->dev, "found [%04x/%04x] class %06x header type %02x\n",
dev->vendor, dev->device, class, dev->hdr_type);
/* "Unknown power state" */
break;
default: /* unknown header */
- printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
- pci_name(dev), dev->hdr_type);
+ dev_err(&dev->dev, "unknown header type %02x, "
+ "ignoring device\n", dev->hdr_type);
return -1;
bad:
- printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
- pci_name(dev), class, dev->hdr_type);
+ dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
+ "type %02x)\n", class, dev->hdr_type);
dev->class = PCI_CLASS_NOT_DEFINED;
}
return PCI_CFG_SPACE_SIZE;
}
-/**
- * pci_disable_pme - Disable the PME function of PCI device
- * @dev: PCI device affected
- * -EINVAL is returned if PCI device doesn't support PME.
- * Zero is returned if the PME is supported and can be disabled.
- */
-static int pci_disable_pme(struct pci_dev *dev)
-{
- int pm;
- u16 value;
-
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* If device doesn't support PM Capabilities, it means that PME is
- * not supported.
- */
- if (!pm)
- return -EINVAL;
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
-
- value &= PCI_PM_CAP_PME_MASK;
- /* Check if it can generate PME# */
- if (!value) {
- /*
- * If it is zero, it means that PME is still unsupported
- * although there exists the PM capability.
- */
- return -EINVAL;
- }
-
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
-
- /* Clear PME_Status by writing 1 to it */
- value |= PCI_PM_CTRL_PME_STATUS ;
- /* Disable PME enable bit */
- value &= ~PCI_PM_CTRL_PME_ENABLE;
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
- return 0;
-}
-
int pci_cfg_space_size(struct pci_dev *dev)
{
int pos;
return NULL;
/* Card hasn't responded in 60 seconds? Must be stuck. */
if (delay > 60 * 1000) {
- printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
+ printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
"responding\n", pci_domain_nr(bus),
bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn));
}
pci_vpd_pci22_init(dev);
- pci_disable_pme(dev);
return dev;
}
/* Fix up broken headers */
pci_fixup_device(pci_fixup_header, dev);
+ /* Initialize power management of the device */
+ pci_pm_init(dev);
+
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.