u16 slot_status;
int timeout = 1000;
- if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
- if (slot_status & CMD_COMPLETED)
- goto completed;
- for (timeout = 1000; timeout > 0; timeout -= 100) {
- msleep(100);
- if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
- if (slot_status & CMD_COMPLETED)
- goto completed;
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+ if (slot_status & CMD_COMPLETED) {
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return 1;
+ }
+ }
+ while (timeout > 1000) {
+ msleep(10);
+ timeout -= 10;
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+ if (slot_status & CMD_COMPLETED) {
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return 1;
+ }
+ }
}
return 0; /* timeout */
-
-completed:
- pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
- return timeout;
}
-static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
+static inline void pcie_wait_cmd(struct controller *ctrl, int poll)
{
- int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
if (poll)
rc = pcie_poll_cmd(ctrl);
else
- rc = wait_event_interruptible_timeout(ctrl->queue,
- !ctrl->cmd_busy, timeout);
+ rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
- else if (rc < 0) {
- retval = -EINTR;
- info("Command was interrupted by a signal\n");
- }
-
- return retval;
}
/**
if (!(slot_ctrl & HP_INTR_ENABLE) ||
!(slot_ctrl & CMD_CMPL_INTR_ENABLE))
poll = 1;
- retval = pcie_wait_cmd(ctrl, poll);
+ pcie_wait_cmd(ctrl, poll);
}
out:
mutex_unlock(&ctrl->ctrl_lock);
{
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
- err("%s: Cannot mask hotplut interrupt enable\n", __func__);
+ err("%s: Cannot mask hotplug interrupt enable\n", __func__);
/* Free interrupt handler or interrupt polling timer */
pciehp_free_irq(ctrl);
intr_loc |= detected;
if (!intr_loc)
return IRQ_NONE;
- if (pciehp_writew(ctrl, SLOTSTATUS, detected)) {
+ if (detected && pciehp_writew(ctrl, SLOTSTATUS, detected)) {
err("%s: Cannot write to SLOTSTATUS\n", __func__);
return IRQ_NONE;
}
if (intr_loc & CMD_COMPLETED) {
ctrl->cmd_busy = 0;
smp_mb();
- wake_up_interruptible(&ctrl->queue);
+ wake_up(&ctrl->queue);
}
if (!(intr_loc & ~CMD_COMPLETED))
.check_lnk_status = hpc_check_lnk_status,
};
-#ifdef CONFIG_ACPI
-static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- acpi_status status;
- acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
- struct pci_dev *pdev = dev;
- struct pci_bus *parent;
- struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
-
- /*
- * Per PCI firmware specification, we should run the ACPI _OSC
- * method to get control of hotplug hardware before using it.
- * If an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC and OSHP
- * within the scope of the hotplug controller and its parents, upto
- * the host bridge under which this controller exists.
- */
- while (!handle) {
- /*
- * This hotplug controller was not listed in the ACPI name
- * space at all. Try to get acpi handle of parent pci bus.
- */
- if (!pdev || !pdev->bus->parent)
- break;
- parent = pdev->bus->parent;
- dbg("Could not find %s in acpi namespace, trying parent\n",
- pci_name(pdev));
- if (!parent->self)
- /* Parent must be a host bridge */
- handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(parent),
- parent->number);
- else
- handle = DEVICE_ACPI_HANDLE(
- &(parent->self->dev));
- pdev = parent->self;
- }
-
- while (handle) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
- dbg("Trying to get hotplug control for %s \n",
- (char *)string.pointer);
- status = pci_osc_control_set(handle,
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL |
- OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
- if (status == AE_NOT_FOUND)
- status = acpi_run_oshp(handle);
- if (ACPI_SUCCESS(status)) {
- dbg("Gained control for hotplug HW for pci %s (%s)\n",
- pci_name(dev), (char *)string.pointer);
- kfree(string.pointer);
- return 0;
- }
- if (acpi_root_bridge(handle))
- break;
- chandle = handle;
- status = acpi_get_parent(chandle, &handle);
- if (ACPI_FAILURE(status))
- break;
- }
-
- dbg("Cannot get control of hotplug hardware for pci %s\n",
- pci_name(dev));
-
- kfree(string.pointer);
- return -1;
-}
-#endif
-
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
if (pcie_write_cmd(ctrl, cmd, mask)) {
err("%s: Cannot enable software notification\n", __func__);
- goto abort;
+ return -1;
}
- if (pciehp_force)
- dbg("Bypassing BIOS check for pciehp use on %s\n",
- pci_name(ctrl->pci_dev));
- else if (pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev))
- goto abort_disable_intr;
-
return 0;
-
- /* We end up here for the many possible ways to fail this API. */
-abort_disable_intr:
- if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE))
- err("%s : disabling interrupts failed\n", __func__);
-abort:
- return -1;
}
static inline void dbg_ctrl(struct controller *ctrl)
dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, ®16);
dbg("Slot Status : 0x%04x\n", reg16);
- pciehp_readw(ctrl, SLOTSTATUS, ®16);
+ pciehp_readw(ctrl, SLOTCTRL, ®16);
dbg("Slot Control : 0x%04x\n", reg16);
}