#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/firmware.h>
+#include <linux/leds.h>
#include <linux/mutex.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "rt2x00debug.h"
+#include "rt2x00leds.h"
#include "rt2x00reg.h"
#include "rt2x00queue.h"
/*
* Module information.
*/
-#define DRV_VERSION "2.0.14"
+#define DRV_VERSION "2.1.6"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
return DEFAULT_RSSI;
}
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+ link->ant.rssi_ant = 0;
+}
+
static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
enum antenna ant)
{
*/
unsigned int delayed_flags;
#define DELAYED_UPDATE_BEACON 0x00000001
-#define DELAYED_CONFIG_PREAMBLE 0x00000002
+#define DELAYED_CONFIG_ERP 0x00000002
+#define DELAYED_LED_ASSOC 0x00000004
};
static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
return (struct rt2x00_intf *)vif->drv_priv;
}
-/*
+/**
+ * struct hw_mode_spec: Hardware specifications structure
+ *
* Details about the supported modes, rates and channels
* of a particular chipset. This is used by rt2x00lib
* to build the ieee80211_hw_mode array for mac80211.
+ *
+ * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
+ * @supported_rates: Rate types which are supported (CCK, OFDM).
+ * @num_channels: Number of supported channels. This is used as array size
+ * for @tx_power_a, @tx_power_bg and @channels.
+ * @channels: Device/chipset specific channel values (See &struct rf_channel).
+ * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
+ * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
+ * @tx_power_default: Default TX power value to use when either
+ * @tx_power_a or @tx_power_bg is missing.
*/
struct hw_mode_spec {
- /*
- * Number of modes, rates and channels.
- */
- int num_modes;
- int num_rates;
- int num_channels;
+ unsigned int supported_bands;
+#define SUPPORT_BAND_2GHZ 0x00000001
+#define SUPPORT_BAND_5GHZ 0x00000002
+
+ unsigned int supported_rates;
+#define SUPPORT_RATE_CCK 0x00000001
+#define SUPPORT_RATE_OFDM 0x00000002
+
+ unsigned int num_channels;
+ const struct rf_channel *channels;
- /*
- * txpower values.
- */
const u8 *tx_power_a;
const u8 *tx_power_bg;
u8 tx_power_default;
-
- /*
- * Device/chipset specific value.
- */
- const struct rf_channel *channels;
};
/*
struct antenna_setup ant;
- int phymode;
+ enum ieee80211_band band;
- int basic_rates;
- int slot_time;
+ u32 basic_rates;
+ u32 slot_time;
short sifs;
short pifs;
short eifs;
};
+/*
+ * Configuration structure for erp settings.
+ */
+struct rt2x00lib_erp {
+ int short_preamble;
+
+ int ack_timeout;
+ int ack_consume_time;
+};
+
/*
* Configuration structure wrapper around the
* rt2x00 interface configuration handler.
*/
int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
+ u16 (*get_firmware_crc) (void *data, const size_t len);
int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data,
const size_t len);
*/
void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
- struct txentry_desc *txdesc,
- struct ieee80211_tx_control *control);
+ struct txentry_desc *txdesc);
int (*write_tx_data) (struct rt2x00_dev *rt2x00dev,
- struct data_queue *queue, struct sk_buff *skb,
- struct ieee80211_tx_control *control);
+ struct data_queue *queue, struct sk_buff *skb);
int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
- unsigned int queue);
+ const enum data_queue_qid queue);
/*
* RX control handlers
/*
* Configuration handlers.
*/
+ void (*config_filter) (struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags);
void (*config_intf) (struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct rt2x00intf_conf *conf,
#define CONFIG_UPDATE_MAC ( 1 << 2 )
#define CONFIG_UPDATE_BSSID ( 1 << 3 )
- int (*config_preamble) (struct rt2x00_dev *rt2x00dev,
- const int short_preamble,
- const int ack_timeout,
- const int ack_consume_time);
+ void (*config_erp) (struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_erp *erp);
void (*config) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags);
const unsigned int max_ap_intf;
const unsigned int eeprom_size;
const unsigned int rf_size;
+ const unsigned int tx_queues;
const struct data_queue_desc *rx;
const struct data_queue_desc *tx;
const struct data_queue_desc *bcn;
/*
* Driver features
*/
- DRIVER_SUPPORT_MIXED_INTERFACES,
DRIVER_REQUIRE_FIRMWARE,
- DRIVER_REQUIRE_FIRMWARE_CRC_ITU_T,
- DRIVER_REQUIRE_FIRMWARE_CCITT,
DRIVER_REQUIRE_BEACON_GUARD,
DRIVER_REQUIRE_ATIM_QUEUE,
+ DRIVER_REQUIRE_SCHEDULED,
/*
* Driver configuration
* IEEE80211 control structure.
*/
struct ieee80211_hw *hw;
- struct ieee80211_hw_mode *hwmodes;
- unsigned int curr_hwmode;
-#define HWMODE_B 0
-#define HWMODE_G 1
-#define HWMODE_A 2
+ struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+ enum ieee80211_band curr_band;
/*
* rfkill structure for RF state switching support.
* This will only be compiled in when required.
*/
#ifdef CONFIG_RT2X00_LIB_RFKILL
+ unsigned long rfkill_state;
+#define RFKILL_STATE_ALLOCATED 1
+#define RFKILL_STATE_REGISTERED 2
struct rfkill *rfkill;
struct input_polled_dev *poll_dev;
#endif /* CONFIG_RT2X00_LIB_RFKILL */
struct rt2x00debug_intf *debugfs_intf;
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+ /*
+ * LED structure for changing the LED status
+ * by mac8011 or the kernel.
+ */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+ struct rt2x00_led led_radio;
+ struct rt2x00_led led_assoc;
+ struct rt2x00_led led_qual;
+ u16 led_mcu_reg;
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
/*
* Device flags.
* In these flags the current status and some
/*
* Register pointers
- * csr_addr: Base register address. (PCI)
- * csr_cache: CSR cache for usb_control_msg. (USB)
+ * csr.base: CSR base register address. (PCI)
+ * csr.cache: CSR cache for usb_control_msg. (USB)
*/
- void __iomem *csr_addr;
- void *csr_cache;
+ union csr {
+ void __iomem *base;
+ void *cache;
+ } csr;
/*
* Mutex to protect register accesses on USB devices.
*/
u16 tx_power;
- /*
- * LED register (for rt61pci & rt73usb).
- */
- u16 led_reg;
-
- /*
- * Led mode (LED_MODE_*)
- */
- u8 led_mode;
-
/*
* Rssi <-> Dbm offset
*/
}
/**
- * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue
+ * rt2x00queue_create_tx_descriptor - Create TX descriptor from mac80211 input
+ * @entry: The entry which will be used to transfer the TX frame.
+ * @txdesc: rt2x00 TX descriptor which will be initialized by this function.
+ *
+ * This function will initialize the &struct txentry_desc based on information
+ * from mac80211. This descriptor can then be used by rt2x00lib and the drivers
+ * to correctly initialize the hardware descriptor.
+ * Note that before calling this function the skb->cb array must be untouched
+ * by rt2x00lib. Only after this function completes will it be save to
+ * overwrite the skb->cb information.
+ * The reason for this is that mac80211 writes its own tx information into
+ * the skb->cb array, and this function will use that information to initialize
+ * the &struct txentry_desc structure.
+ */
+void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc);
+
+/**
+ * rt2x00queue_write_tx_descriptor - Write TX descriptor to hardware
+ * @entry: The entry which will be used to transfer the TX frame.
+ * @txdesc: TX descriptor which will be used to write hardware descriptor
+ *
+ * This function will write a TX descriptor initialized by
+ * &rt2x00queue_create_tx_descriptor to the hardware. After this call
+ * has completed the frame is now owned by the hardware, the hardware
+ * queue will have automatically be kicked unless this frame was generated
+ * by rt2x00lib, in which case the frame is "special" and must be kicked
+ * by the caller.
+ */
+void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc);
+
+/**
+ * rt2x00queue_get_queue - Convert queue index to queue pointer
* @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @queue: mac80211 queue index (see &enum ieee80211_tx_queue).
+ * @queue: rt2x00 queue index (see &enum data_queue_qid).
*/
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
- const enum ieee80211_tx_queue queue);
+ const enum data_queue_qid queue);
/**
* rt2x00queue_get_entry - Get queue entry where the given index points to.
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @queue: Pointer to &struct data_queue from where we obtain the entry.
* @index: Index identifier for obtaining the correct index.
*/
struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
/**
* rt2x00queue_index_inc - Index incrementation function
* @queue: Queue (&struct data_queue) to perform the action on.
- * @action: Index type (&enum queue_index) to perform the action on.
+ * @index: Index type (&enum queue_index) to perform the action on.
*
* This function will increase the requested index on the queue,
* it will grab the appropriate locks and handle queue overflow events by
void rt2x00lib_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc);
-/*
- * TX descriptor initializer
- */
-void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb,
- struct ieee80211_tx_control *control);
-
/*
* mac80211 handlers.
*/
-int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control);
+int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
int rt2x00mac_start(struct ieee80211_hw *hw);
void rt2x00mac_stop(struct ieee80211_hw *hw);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
int rt2x00mac_config_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf);
+void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count, struct dev_addr_list *mc_list);
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changes);
-int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
+int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
/*