rt2x00: INPUT build failure

[linux-2.6-omap-h63xx.git] / drivers / net / wireless / rt2x00 / Kconfig

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index da05b1faf60d359ff21dcb4a39620e83d6f4a2f7..23abef92699f5f548996b7dd7fcb7d7c38ee9a73 100644 (file)
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -5,41 +5,44 @@ config RT2X00
          This will enable the experimental support for the Ralink drivers,
          developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
 
-         These drivers will make use of the Devicescape ieee80211 stack.
+         These drivers will make use of the mac80211 stack.
 
          When building one of the individual drivers, the rt2x00 library
          will also be created. That library (when the driver is built as
          a module) will be called "rt2x00lib.ko".
 
+if RT2X00
+
 config RT2X00_LIB
        tristate
-       depends on RT2X00
 
 config RT2X00_LIB_PCI
        tristate
-       depends on RT2X00
        select RT2X00_LIB
 
 config RT2X00_LIB_USB
        tristate
-       depends on RT2X00
        select RT2X00_LIB
 
 config RT2X00_LIB_FIRMWARE
        boolean
        depends on RT2X00_LIB
-       select CRC_ITU_T
        select FW_LOADER
 
 config RT2X00_LIB_RFKILL
        boolean
        depends on RT2X00_LIB
+       depends on INPUT
        select RFKILL
        select INPUT_POLLDEV
 
+config RT2X00_LIB_LEDS
+       boolean
+       depends on RT2X00_LIB
+
 config RT2400PCI
        tristate "Ralink rt2400 pci/pcmcia support"
-       depends on RT2X00 && PCI
+       depends on PCI
        select RT2X00_LIB_PCI
        select EEPROM_93CX6
        ---help---
@@ -49,16 +52,24 @@ config RT2400PCI
 
 config RT2400PCI_RFKILL
        bool "RT2400 rfkill support"
-       depends on RT2400PCI
+       depends on RT2400PCI && INPUT
        select RT2X00_LIB_RFKILL
        ---help---
          This adds support for integrated rt2400 devices that feature a
          hardware button to control the radio state.
          This feature depends on the RF switch subsystem rfkill.
 
+config RT2400PCI_LEDS
+       bool "RT2400 leds support"
+       depends on RT2400PCI
+       select LEDS_CLASS
+       select RT2X00_LIB_LEDS
+       ---help---
+         This adds support for led triggers provided my mac80211.
+
 config RT2500PCI
        tristate "Ralink rt2500 pci/pcmcia support"
-       depends on RT2X00 && PCI
+       depends on PCI
        select RT2X00_LIB_PCI
        select EEPROM_93CX6
        ---help---
@@ -68,18 +79,27 @@ config RT2500PCI
 
 config RT2500PCI_RFKILL
        bool "RT2500 rfkill support"
-       depends on RT2500PCI
+       depends on RT2500PCI && INPUT
        select RT2X00_LIB_RFKILL
        ---help---
          This adds support for integrated rt2500 devices that feature a
          hardware button to control the radio state.
          This feature depends on the RF switch subsystem rfkill.
 
+config RT2500PCI_LEDS
+       bool "RT2500 leds support"
+       depends on RT2500PCI
+       select LEDS_CLASS
+       select RT2X00_LIB_LEDS
+       ---help---
+         This adds support for led triggers provided my mac80211.
+
 config RT61PCI
        tristate "Ralink rt61 pci/pcmcia support"
-       depends on RT2X00 && PCI
+       depends on PCI
        select RT2X00_LIB_PCI
        select RT2X00_LIB_FIRMWARE
+       select CRC_ITU_T
        select EEPROM_93CX6
        ---help---
          This is an experimental driver for the Ralink rt61 wireless chip.
@@ -88,32 +108,57 @@ config RT61PCI
 
 config RT61PCI_RFKILL
        bool "RT61 rfkill support"
-       depends on RT61PCI
+       depends on RT61PCI && INPUT
        select RT2X00_LIB_RFKILL
        ---help---
          This adds support for integrated rt61 devices that feature a
          hardware button to control the radio state.
          This feature depends on the RF switch subsystem rfkill.
 
+config RT61PCI_LEDS
+       bool "RT61 leds support"
+       depends on RT61PCI
+       select LEDS_CLASS
+       select RT2X00_LIB_LEDS
+       ---help---
+         This adds support for led triggers provided my mac80211.
+
 config RT2500USB
        tristate "Ralink rt2500 usb support"
-       depends on RT2X00 && USB
+       depends on USB
        select RT2X00_LIB_USB
        ---help---
          This is an experimental driver for the Ralink rt2500 wireless chip.
 
          When compiled as a module, this driver will be called "rt2500usb.ko".
 
+config RT2500USB_LEDS
+       bool "RT2500 leds support"
+       depends on RT2500USB
+       select LEDS_CLASS
+       select RT2X00_LIB_LEDS
+       ---help---
+         This adds support for led triggers provided my mac80211.
+
 config RT73USB
        tristate "Ralink rt73 usb support"
-       depends on RT2X00 && USB
+       depends on USB
        select RT2X00_LIB_USB
        select RT2X00_LIB_FIRMWARE
+       select CRC_ITU_T
        ---help---
          This is an experimental driver for the Ralink rt73 wireless chip.
 
          When compiled as a module, this driver will be called "rt73usb.ko".
 
+config RT73USB_LEDS
+       bool "RT73 leds support"
+       depends on RT73USB
+       select LEDS_CLASS
+       select RT2X00_LIB_LEDS
+       ---help---
+         This adds support for led triggers provided my mac80211.
+
 config RT2X00_LIB_DEBUGFS
        bool "Ralink debugfs support"
        depends on RT2X00_LIB && MAC80211_DEBUGFS
@@ -128,3 +173,4 @@ config RT2X00_DEBUG
        ---help---
          Enable debugging output for all rt2x00 modules
 
+endif