q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
tx_info = &txq->txb[txq->q.read_ptr];
- ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0],
- &tx_info->status);
+ ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
tx_info->skb[0] = NULL;
iwl3945_hw_txq_free_tfd(priv, txq);
}
int txq_id = SEQ_TO_QUEUE(sequence);
int index = SEQ_TO_INDEX(sequence);
struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_tx_status *tx_status;
+ struct ieee80211_tx_info *info;
struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->status);
int rate_idx;
return;
}
- tx_status = &(txq->txb[txq->q.read_ptr].status);
+ info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
+ memset(&info->status, 0, sizeof(info->status));
- tx_status->retry_count = tx_resp->failure_frame;
+ info->status.retry_count = tx_resp->failure_frame;
/* tx_status->rts_retry_count = tx_resp->failure_rts; */
- tx_status->flags = ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
- IEEE80211_TX_STATUS_ACK : 0;
+ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
+ IEEE80211_TX_STAT_ACK : 0;
IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
txq_id, iwl3945_get_tx_fail_reason(status), status,
tx_resp->rate, tx_resp->failure_frame);
rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
- tx_status->control.tx_rate = &priv->ieee_rates[rate_idx];
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx -= IWL_FIRST_OFDM_RATE;
+ info->tx_rate_idx = rate_idx;
IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
iwl3945_tx_queue_reclaim(priv, txq_id, index);
u32 print_dump = 0; /* set to 1 to dump all frames' contents */
u32 hundred = 0;
u32 dataframe = 0;
- u16 fc;
+ __le16 fc;
u16 seq_ctl;
u16 channel;
u16 phy_flags;
u8 *data = IWL_RX_DATA(pkt);
/* MAC header */
- fc = le16_to_cpu(header->frame_control);
+ fc = header->frame_control;
seq_ctl = le16_to_cpu(header->seq_ctrl);
/* metadata */
/* if data frame is to us and all is good,
* (optionally) print summary for only 1 out of every 100 */
- if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) ==
- (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
+ if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
+ cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
dataframe = 1;
if (!group100)
print_summary = 1; /* print each frame */
if (hundred)
title = "100Frames";
- else if (fc & IEEE80211_FCTL_RETRY)
+ else if (ieee80211_has_retry(fc))
title = "Retry";
- else if (ieee80211_is_assoc_response(fc))
+ else if (ieee80211_is_assoc_resp(fc))
title = "AscRsp";
- else if (ieee80211_is_reassoc_response(fc))
+ else if (ieee80211_is_reassoc_resp(fc))
title = "RasRsp";
- else if (ieee80211_is_probe_response(fc)) {
+ else if (ieee80211_is_probe_resp(fc)) {
title = "PrbRsp";
print_dump = 1; /* dump frame contents */
} else if (ieee80211_is_beacon(fc)) {
if (dataframe)
IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
"len=%u, rssi=%d, chnl=%d, rate=%u, \n",
- title, fc, header->addr1[5],
+ title, le16_to_cpu(fc), header->addr1[5],
length, rssi, channel, rate);
else {
/* src/dst addresses assume managed mode */
IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
"src=0x%02x, rssi=%u, tim=%lu usec, "
"phy=0x%02x, chnl=%d\n",
- title, fc, header->addr1[5],
+ title, le16_to_cpu(fc), header->addr1[5],
header->addr3[5], rssi,
tsf_low - priv->scan_start_tsf,
phy_flags, channel);
{
/* First cache any information we need before we overwrite
* the information provided in the skb from the hardware */
- s8 signal = stats->ssi;
+ s8 signal = stats->signal;
s8 noise = 0;
int rate = stats->rate_idx;
u64 tsf = stats->mactime;
}
/* Convert 3945's rssi indicator to dBm */
- rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
+ rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
/* Set default noise value to -127 */
if (priv->last_rx_noise == 0)
* Calculate rx_status.signal (quality indicator in %) based on SNR. */
if (rx_stats_noise_diff) {
snr = rx_stats_sig_avg / rx_stats_noise_diff;
- rx_status.noise = rx_status.ssi -
+ rx_status.noise = rx_status.signal -
iwl3945_calc_db_from_ratio(snr);
- rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi,
+ rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
rx_status.noise);
/* If noise info not available, calculate signal quality indicator (%)
* using just the dBm signal level. */
} else {
rx_status.noise = priv->last_rx_noise;
- rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi, 0);
+ rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
}
IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
- rx_status.ssi, rx_status.noise, rx_status.signal,
+ rx_status.signal, rx_status.noise, rx_status.qual,
rx_stats_sig_avg, rx_stats_noise_diff);
header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
network_packet ? '*' : ' ',
le16_to_cpu(rx_hdr->channel),
- rx_status.ssi, rx_status.ssi,
- rx_status.ssi, rx_status.rate_idx);
+ rx_status.signal, rx_status.signal,
+ rx_status.noise, rx_status.rate_idx);
#ifdef CONFIG_IWL3945_DEBUG
if (iwl3945_debug_level & (IWL_DL_RX))
if (network_packet) {
priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
priv->last_tsf = le64_to_cpu(rx_end->timestamp);
- priv->last_rx_rssi = rx_status.ssi;
+ priv->last_rx_rssi = rx_status.signal;
priv->last_rx_noise = rx_status.noise;
}
*/
void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv,
struct iwl3945_cmd *cmd,
- struct ieee80211_tx_control *ctrl,
+ struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr, int sta_id, int tx_id)
{
unsigned long flags;
- u16 rate_index = min(ctrl->tx_rate->hw_value & 0xffff, IWL_RATE_COUNT - 1);
+ u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
+ u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
u16 rate_mask;
int rate;
u8 rts_retry_limit;
u8 data_retry_limit;
__le32 tx_flags;
- u16 fc = le16_to_cpu(hdr->frame_control);
+ __le16 fc = hdr->frame_control;
rate = iwl3945_rates[rate_index].plcp;
tx_flags = cmd->cmd.tx.tx_flags;
/* We need to figure out how to get the sta->supp_rates while
- * in this running context; perhaps encoding into ctrl->tx_rate? */
+ * in this running context */
rate_mask = IWL_RATES_MASK;
spin_lock_irqsave(&priv->sta_lock, flags);
else
rts_retry_limit = 7;
- if (ieee80211_is_probe_response(fc)) {
+ if (ieee80211_is_probe_resp(fc)) {
data_retry_limit = 3;
if (data_retry_limit < rts_retry_limit)
rts_retry_limit = data_retry_limit;
if (priv->data_retry_limit != -1)
data_retry_limit = priv->data_retry_limit;
- if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_AUTH:
- case IEEE80211_STYPE_DEAUTH:
- case IEEE80211_STYPE_ASSOC_REQ:
- case IEEE80211_STYPE_REASSOC_REQ:
+ if (ieee80211_is_mgmt(fc)) {
+ switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+ case cpu_to_le16(IEEE80211_STYPE_AUTH):
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+ case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
if (tx_flags & TX_CMD_FLG_RTS_MSK) {
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx_flags |= TX_CMD_FLG_CTS_MSK;
iwl3945_power_init_handle(priv);
spin_lock_irqsave(&priv->lock, flags);
- iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24));
+ iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL);
iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
projects / linux-2.6-omap-h63xx.git / blobdiff