sky2: phy setup changes

[linux-2.6-omap-h63xx.git] / drivers / net / sky2.c

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7f1cfc48e1b2c94d5068cf1c694bb4b8f105c9c7..af7ea887118aba9f8915765d1cd7eb1659ad2740 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -658,8 +658,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
                ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
        }
 
-       if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
-           hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
+       if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
                /* apply fixes in PHY AFE */
                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
 
@@ -678,7 +677,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
                /* apply workaround for integrated resistors calibration */
                gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
                gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
-       } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
+       } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
+                  hw->chip_id < CHIP_ID_YUKON_SUPR) {
                /* no effect on Yukon-XL */
                gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);