* same as system mdio bus, used for controlling the external PHYs, for eg.
*/
int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)
-
{
u16 value;
}
/* Reset the MIIM registers, and wait for the bus to free */
-int gfar_mdio_reset(struct mii_bus *bus)
+static int gfar_mdio_reset(struct mii_bus *bus)
{
struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
/* Wait until the bus is free */
while ((gfar_read(®s->miimind) & MIIMIND_BUSY) &&
- timeout--)
+ --timeout)
cpu_relax();
mutex_unlock(&bus->mdio_lock);
- if(timeout <= 0) {
+ if(timeout == 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
bus->name);
return -EBUSY;
}
-int gfar_mdio_probe(struct device *dev)
+static int gfar_mdio_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct gianfar_mdio_data *pdata;
struct gfar_mii __iomem *regs;
+ struct gfar __iomem *enet_regs;
struct mii_bus *new_bus;
struct resource *r;
- int err = 0;
+ int i, err = 0;
if (NULL == dev)
return -EINVAL;
- new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
-
+ new_bus = mdiobus_alloc();
if (NULL == new_bus)
return -ENOMEM;
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
new_bus->reset = &gfar_mdio_reset,
- new_bus->id = pdev->id;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
new_bus->irq = pdata->irq;
- new_bus->dev = dev;
+ new_bus->parent = dev;
dev_set_drvdata(dev, new_bus);
+ /*
+ * This is mildly evil, but so is our hardware for doing this.
+ * Also, we have to cast back to struct gfar_mii because of
+ * definition weirdness done in gianfar.h.
+ */
+ enet_regs = (struct gfar __iomem *)
+ ((char *)regs - offsetof(struct gfar, gfar_mii_regs));
+
+ /* Scan the bus, looking for an empty spot for TBIPA */
+ gfar_write(&enet_regs->tbipa, 0);
+ for (i = PHY_MAX_ADDR; i > 0; i--) {
+ u32 phy_id;
+
+ err = get_phy_id(new_bus, i, &phy_id);
+ if (err)
+ goto bus_register_fail;
+
+ if (phy_id == 0xffffffff)
+ break;
+ }
+
+ /* The bus is full. We don't support using 31 PHYs, sorry */
+ if (i == 0) {
+ err = -EBUSY;
+
+ goto bus_register_fail;
+ }
+
+ gfar_write(&enet_regs->tbipa, i);
+
err = mdiobus_register(new_bus);
if (0 != err) {
bus_register_fail:
iounmap(regs);
reg_map_fail:
- kfree(new_bus);
+ mdiobus_free(new_bus);
return err;
}
-int gfar_mdio_remove(struct device *dev)
+static int gfar_mdio_remove(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
iounmap((void __iomem *)bus->priv);
bus->priv = NULL;
- kfree(bus);
+ mdiobus_free(bus);
return 0;
}
.remove = gfar_mdio_remove,
};
+static int match_mdio_bus(struct device *dev, void *data)
+{
+ const struct gfar_private *priv = data;
+ const struct platform_device *pdev = to_platform_device(dev);
+
+ return !strcmp(pdev->name, gianfar_mdio_driver.name) &&
+ pdev->id == priv->einfo->mdio_bus;
+}
+
+/* Given a gfar_priv structure, find the mii_bus controlled by this device (not
+ * necessarily the same as the bus the gfar's PHY is on), if one exists.
+ * Normally only the first gianfar controls a mii_bus. */
+struct mii_bus *gfar_get_miibus(const struct gfar_private *priv)
+{
+ /*const*/ struct device *d;
+
+ d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv,
+ match_mdio_bus);
+ return d ? dev_get_drvdata(d) : NULL;
+}
+
int __init gfar_mdio_init(void)
{
return driver_register(&gianfar_mdio_driver);