[PATCH] e1000: Fix flow control water marks

[linux-2.6-omap-h63xx.git] / drivers / net / e1000 / e1000_main.c

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4016264a79190b4203a31e4d9bde7a4e76ffd3b3..cefc7cc092a7b10c1ce05e55c087558e936b712f 100644 (file)
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -504,10 +504,8 @@ e1000_down(struct e1000_adapter *adapter)
 void
 e1000_reset(struct e1000_adapter *adapter)
 {
-       struct net_device *netdev = adapter->netdev;
        uint32_t pba, manc;
        uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
-       uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF;
 
        /* Repartition Pba for greater than 9k mtu
         * To take effect CTRL.RST is required.
@@ -531,15 +529,8 @@ e1000_reset(struct e1000_adapter *adapter)
        }
 
        if((adapter->hw.mac_type != e1000_82573) &&
-          (adapter->netdev->mtu > E1000_RXBUFFER_8192)) {
+          (adapter->netdev->mtu > E1000_RXBUFFER_8192))
                pba -= 8; /* allocate more FIFO for Tx */
-               /* send an XOFF when there is enough space in the
-                * Rx FIFO to hold one extra full size Rx packet 
-               */
-               fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE + 
-                                       ETHERNET_FCS_SIZE + 1;
-               fc_low_water_mark = fc_high_water_mark + 8;
-       }
 
 
        if(adapter->hw.mac_type == e1000_82547) {
@@ -553,10 +544,12 @@ e1000_reset(struct e1000_adapter *adapter)
        E1000_WRITE_REG(&adapter->hw, PBA, pba);
 
        /* flow control settings */
-       adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) -
-                                   fc_high_water_mark;
-       adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) -
-                                  fc_low_water_mark;
+       /* Set the FC high water mark to 90% of the FIFO size.
+        * Required to clear last 3 LSB */
+       fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+
+       adapter->hw.fc_high_water = fc_high_water_mark;
+       adapter->hw.fc_low_water = fc_high_water_mark - 8;
        adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
        adapter->hw.fc_send_xon = 1;
        adapter->hw.fc = adapter->hw.original_fc;