bnx2x: Spelling mistakes

[linux-2.6-omap-h63xx.git] / drivers / net / bnx2x_main.c

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index d3c4c1ed07ef74fae29b05efd77c66d933b1e4e8..1bbcdb22d96ff5eaf6571aa71b2720230c5b072f 100644 (file)
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1151,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
        memset(fp->sge_mask, 0xff,
               (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
 
-       /* Clear the two last indeces in the page to 1:
-          these are the indeces that correspond to the "next" element,
+       /* Clear the two last indices in the page to 1:
+          these are the indices that correspond to the "next" element,
           hence will never be indicated and should be removed from
           the calculations. */
        bnx2x_clear_sge_mask_next_elems(fp);
@@ -2011,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
      sum of vn_min_rates
        or
      0 - if all the min_rates are 0.
-     In the later case fainess algorithm should be deactivated.
+     In the later case fairness algorithm should be deactivated.
      If not all min_rates are zero then those that are zeroes will
      be set to 1.
  */
@@ -2134,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
                                FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
                /* If FAIRNESS is enabled (not all min rates are zeroes) and
                   if current min rate is zero - set it to 1.
-                  This is a requirment of the algorithm. */
+                  This is a requirement of the algorithm. */
                if ((vn_min_rate == 0) && wsum)
                        vn_min_rate = DEF_MIN_RATE;
                vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
@@ -6562,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
        val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
        if (val)
                DP(NETIF_MSG_IFDOWN,
-                  "BRB1 is not empty  %d blooks are occupied\n", val);
+                  "BRB1 is not empty  %d blocks are occupied\n", val);
 
        /* TODO: Close Doorbell port? */
 }
@@ -6602,7 +6602,7 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
        }
 }
 
-/* msut be called with rtnl_lock */
+/* must be called with rtnl_lock */
 static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
        int port = BP_PORT(bp);
@@ -7455,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
        if (BP_NOMCP(bp)) {
                /* only supposed to happen on emulation/FPGA */
-               BNX2X_ERR("warning rendom MAC workaround active\n");
+               BNX2X_ERR("warning random MAC workaround active\n");
                random_ether_addr(bp->dev->dev_addr);
                memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
        }
@@ -8907,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
        if (!netif_running(dev))
                return;
 
-       /* offline tests are not suppoerted in MF mode */
+       /* offline tests are not supported in MF mode */
        if (IS_E1HMF(bp))
                etest->flags &= ~ETH_TEST_FL_OFFLINE;
 
@@ -9216,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
                                       PCI_PM_CTRL_PME_STATUS));
 
                if (pmcsr & PCI_PM_CTRL_STATE_MASK)
-               /* delay required during transition out of D3hot */
+                       /* delay required during transition out of D3hot */
                        msleep(20);
                break;
 
@@ -9289,7 +9289,7 @@ poll_panic:
 
 
 /* we split the first BD into headers and data BDs
- * to ease the pain of our fellow micocode engineers
+ * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
  * So far this has only been observed to happen
  * in Other Operating Systems(TM)
@@ -9396,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
                        /* Check if LSO packet needs to be copied:
                           3 = 1 (for headers BD) + 2 (for PBD and last BD) */
                        int wnd_size = MAX_FETCH_BD - 3;
-                       /* Number of widnows to check */
+                       /* Number of windows to check */
                        int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
                        int wnd_idx = 0;
                        int frag_idx = 0;
@@ -9498,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
           skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
           ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
-       /* First, check if we need to linearaize the skb
+       /* First, check if we need to linearize the skb
           (due to FW restrictions) */
        if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
                /* Statistics of linearization */