/*
- * File: drivers/net/bfin_mac.c
- * Based on:
- * Maintainer:
- * Bryan Wu <bryan.wu@analog.com>
+ * Blackfin On-Chip MAC Driver
*
- * Original author:
- * Luke Yang <luke.yang@analog.com>
+ * Copyright 2004-2007 Analog Devices Inc.
*
- * Created:
- * Description:
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * Modified:
- * 2006-12-19 Aidan Williams, multicast hash support
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software ; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program ; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
#define DRV_NAME "bfin_mac"
#define DRV_VERSION "1.1"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
-#define DRV_DESC "Blackfin BF53[67] on-chip Ethernet MAC driver"
+#define DRV_DESC "Blackfin BF53[67] BF527 on-chip Ethernet MAC driver"
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
mdc_div = ((sclk / MDC_CLK) / 2) - 1;
sysctl = bfin_read_EMAC_SYSCTL();
- sysctl |= SET_MDCDIV(mdc_div);
+ sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
bfin_write_EMAC_SYSCTL(sysctl);
/* search for connect PHY device */
static int bf537mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned int data;
current_tx_ptr->skb = skb;
static void bf537mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned short len;
/* allocate a new skb for next time receive */
current_rx_ptr->skb = new_skb;
current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+ /* Invidate the data cache of skb->data range when it is write back
+ * cache. It will prevent overwritting the new data from DMA
+ */
+ blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+ (unsigned long)new_skb->end);
+
len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
skb_put(skb, len);
blackfin_dcache_invalidate_range((unsigned long)skb->head,
#if defined(CONFIG_BFIN_MAC_RMII)
opmode |= RMII; /* For Now only 100MBit are supported */
-#ifdef CONFIG_BF_REV_0_2
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
opmode |= TE;
#endif
#endif
return retval;
phy_start(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
setup_system_regs(dev);
bf537mac_disable();
bf537mac_enable();
-
pr_debug("hardware init finished\n");
netif_start_queue(dev);
netif_carrier_on(dev);
netif_carrier_off(dev);
phy_stop(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
/* clear everything */
bf537mac_shutdown(dev);
lp->mii_bus.write = mdiobus_write;
lp->mii_bus.reset = mdiobus_reset;
lp->mii_bus.name = "bfin_mac_mdio";
- lp->mii_bus.id = 0;
+ snprintf(lp->mii_bus.id, MII_BUS_ID_SIZE, "0");
lp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for (i = 0; i < PHY_MAX_ADDR; ++i)
lp->mii_bus.irq[i] = PHY_POLL;
/* register irq handler */
if (request_irq
(IRQ_MAC_RX, bf537mac_interrupt, IRQF_DISABLED | IRQF_SHARED,
- "BFIN537_MAC_RX", dev)) {
+ "EMAC_RX", dev)) {
printk(KERN_WARNING DRV_NAME
": Unable to attach BlackFin MAC RX interrupt\n");
return -EBUSY;
.resume = bfin_mac_resume,
.suspend = bfin_mac_suspend,
.driver = {
- .name = DRV_NAME,
- },
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
};
static int __init bfin_mac_init(void)
}
module_exit(bfin_mac_cleanup);
+