e1000: delete non NAPI code from the driver

[linux-2.6-omap-h63xx.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 21414177ee1e5ba1115f67e376969577f9a4c7be..fa533c27052a727e757fea2687c1f3bbb93b0346 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -209,7 +209,7 @@ config MII
 
 config MACB
        tristate "Atmel MACB support"
-       depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+       depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
        select PHYLIB
        help
          The Atmel MACB ethernet interface is found on many AT32 and AT91
@@ -325,15 +325,6 @@ config APNE
          To compile this driver as a module, choose M here: the module
          will be called apne.
 
-config APOLLO_ELPLUS
-       tristate "Apollo 3c505 support"
-       depends on APOLLO
-       help
-         Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
-         If you don't have one made for Apollos, you can use one from a PC,
-         except that your Apollo won't be able to boot from it (because the
-         code in the ROM will be for a PC).
-
 config MAC8390
        bool "Macintosh NS 8390 based ethernet cards"
        depends on MAC
@@ -1694,15 +1685,6 @@ config VIA_RHINE_MMIO
 
          If unsure, say Y.
 
-config LAN_SAA9730
-       bool "Philips SAA9730 Ethernet support"
-       depends on NET_PCI && PCI && MIPS_ATLAS
-       help
-         The SAA9730 is a combined multimedia and peripheral controller used
-         in thin clients, Internet access terminals, and diskless
-         workstations.
-         See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-
 config SC92031
        tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
        depends on NET_PCI && PCI && EXPERIMENTAL
@@ -1857,7 +1839,6 @@ config NE_H8300
          Say Y here if you want to use the NE2000 compatible
          controller on the Renesas H8/300 processor.
 
-source "drivers/net/fec_8xx/Kconfig"
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
@@ -1945,20 +1926,6 @@ config E1000
          To compile this driver as a module, choose M here. The module
          will be called e1000.
 
-config E1000_NAPI
-       bool "Use Rx Polling (NAPI)"
-       depends on E1000
-       help
-         NAPI is a new driver API designed to reduce CPU and interrupt load
-         when the driver is receiving lots of packets from the card. It is
-         still somewhat experimental and thus not yet enabled by default.
-
-         If your estimated Rx load is 10kpps or more, or if the card will be
-         deployed on potentially unfriendly networks (e.g. in a firewall),
-         then say Y here.
-
-         If in doubt, say N.
-
 config E1000_DISABLE_PACKET_SPLIT
        bool "Disable Packet Split for PCI express adapters"
        depends on E1000
@@ -2018,6 +1985,15 @@ config IGB
          To compile this driver as a module, choose M here. The module
          will be called igb.
 
+config IGB_LRO 
+       bool "Use software LRO"
+       depends on IGB && INET
+       select INET_LRO
+       ---help---
+         Say Y here if you want to use large receive offload. 
+
+         If in doubt, say N.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2314,6 +2290,17 @@ config ATL1
          To compile this driver as a module, choose M here.  The module
          will be called atl1.
 
+config ATL1E
+       tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+       depends on PCI && EXPERIMENTAL
+       select CRC32
+       select MII
+       help
+         This driver supports the Atheros L1E gigabit ethernet adapter.
+
+         To compile this driver as a module, choose M here.  The module
+         will be called atl1e.
+
 endif # NETDEV_1000
 
 #